Items where Author is "Rajinikanth, V"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 34.

Article

Rajinikanth, V and Kumar, Tipu and Mahato, B and Ghosh Chowdhury, S and Sangal, S (2019) Effect of Strain-Induced Precipitation on the Austenite Non-recrystallization (T-nr) Behavior of a High Niobium Microalloyed Steel. Metallurgical and Materials Transactions A, 50(12) . pp. 5816-5838.

Dutta, S and Rajinikanth, V and Panda, A K and Mitra, A and Chatterjee, S and Roy, R K (2019) Effect of Annealing Treatment on Mechanical and Magnetic Softening Behaviors of Cold Rolled Interstitial-Free Steel. Journal of Materials Engineering and Performance , 28(4) . pp. 2228-2236.

Bansal, G K and Pradeep, M and Ghosh, C and Rajinikanth, V and Srivastava, V C and Bhagat, A N and Kundu, S (2019) Evolution of Microstructure in a Low-Si Micro-alloyed Steel Processed Through One-Step Quenching and Partitioning. Metallurgical and Materials Transactions A , 50(2) . pp. 547-555.

Munda, Parikshit and Husain, M M and Soni, M K and Kumar, P and Rajinikanth, V (2019) Metallurgical Investigation of the Collapsed Front Structure of a Dragline in a Coal Mine. Journal of Failure Analysis and Prevention , 19(1) . pp. 161-176.

Bansal, G K and Rajinikanth, V and Ghosh, C and Srivastava, V C and Kundu, S and Ghosh Chowdhury, S (2018) Microstructure–Property Correlation in Low-Si Steel Processed Through Quenching and Nonisothermal Partitioning. Metallurgical and Materials Transactions A, 49(8) (IF-1.985). pp. 3501-3514.

Roy, Rajat K and Dutta, Siuli and Panda, A K and Rajinikanth, V and Das, Swapan K and Mitra, A and Strangwood, M and Davis, C L (2018) Assessment of recovery and recrystallisation behaviours of cold rolled IF steel through non-destructive electromagnetic characterisation. Philosophical Magazine, 98 (1.632). pp. 1933-1944.

Mandal, G K and Rajinikanth, V and Kumar, S and Mishra, D and Misra, S and Srivastava, V C and Ghosh Chowdhury, S (2017) Microstructure Evolution During Hot Deformation of a Micro-Alloyed Steel. Transactions of the Indian Institute of Metals, 70(4) (IF 0.533). pp. 1019-1033.

Rajinikanth, V and Munda, Parikshit and Kumar, Tipu and Ghosh Chowdhury, S and Sangal, Sandeep (2016) Effect of thermomechanical processing schedule on the texture and microstructure of pipeline grade API X80 microalloyed steel. 4 th International conference on Thermomechanical Simulation and Processing of Steels, SIMPRO 2016, 4 (NON-SCI). pp. 231-239.

Metya, Avijit and Munda, Parikshit and Rajinikanth, V and Roy, Rajat (2016) Failure Analysis of SA213-T22 Re-heater Rear Tube of Thermal Power Plant. Transactions of the Indian Institute of Metals, 69(2) (IF-0.533). pp. 665-668.

Rajinikanth, V and Mukherjee, K and Ghosh Chowdhury, S and Schiebahn, A and Harms, A and Belck, W (2013) Mechanical property and microstructure of resistance spot welded twinning induced plasticity-dual phase steels joint. Science and Technology of Welding and Joining, 18/6 (IF-1.274). pp. 485-491.

Rajinikanth, V and Munda, Parikshit and Minj, R K and Ghosh Chowdhury, S (2012) In Quest of self Reliance: NML’s steel development program. Science and Culture, Vol.78/No.11-12 . pp. 532-536.

Srivastava, V C and Poddar, Palash and Rajinikanth, V and Sahoo, K L (2012) Light metals research - Legacy and current standing. Science & Culture, 78(11-12) . pp. 527-531.

Ray, Ajoy K and Sahu, Ranjan K and Rajinikanth, V and Bapari, H and Ghosh, M and Paul, Parimal (2012) Preparation and characterization of graphene and Ni-decorated graphene using flower petals as the precursor material. Carbon, 50 (11). pp. 4123-4129.

Das, Mousumi and Das, Goutam and Ghosh, M and Wegner, Matthias and Rajinikanth, V and Ghosh Chowdhury, S and Pal, T K (2012) Microstructures and mechanical properties of HPT processed 6063 Al alloy. Materials Science and Engineering A, 558 (IF-2.108). pp. 525-532.

Rajinikanth, V and Venkateswarlu, K (2011) An investigation of sliding wear behaviour of WC–Co coating. Tribology International, 44 (12). pp. 1711-1719.

Singh, Raghuvir and Swaminathan, J and Paswan, S and Rajinikanth, V and Chattoraj, I (2011) Investigations on high temperature corrosion of wire enameling oven. Engineering Failure Analysis, 18 (5). pp. 1375-1387.

Rajinikanth, V and Venkateswarlu, K and Sen, Mani Kuntal and Das, Mousumi and Alhajeri, S N and Langdon, T G (2011) Influence of scandium on an Al–2% Si alloy processed by high-pressure torsion. Materials Science and Engineering A, 528 (3). pp. 1702-1706.

Sahu, J K and Das, D K and Nandy, T K and Mandal, D and Rajinikanth, V and Swaminathan, J and Ray, Ashok K (2011) Effect of titanium aluminide coating on cyclic plastic deformation and fatigue life of a titanium alloy at 600 °C. Materials Science and Engineering A, 530 . pp. 664-668.

Venkateswarlu, K and Rajinikanth, V and Sen, Mani Kuntal and Alhajeri, S N and Langdon, T G (2010) Application of High-Pressure Torsion to Al-Si Alloys with and without Scandium Additions. Materials Science Forum, 667-669 . pp. 743-748.

Venkateswarlu, K and Rajinikanth, V and Ray, Ajoy K and Xu, Cheng and Langdon, T G (2010) Effect of A Scandium Addition On An Al-2% Si Alloy Processed by ECAP. Reviews on Advanced Materials Science, 25 (2). pp. 99-106.

Venkateswarlu, K and Rajinikanth, V and Ray, Ajoy K and Xu, Cheng and Langdon, T G (2010) The characteristics of aluminum–scandium alloys processed by ECAP. Materials Science and Engineering: A, 527 (6). pp. 1448-1452.

Venkateswarlu, K and Saurabh, Suman and Rajinikanth, V and Sahu, Ranjan K and Ray, Ajoy K (2010) Synthesis of TiN Reinforced Aluminium Metal Matrix Composites Through Microwave Sintering. Journal of Materials Engineering and Performance, 19 (2). pp. 231-236.

Venkateswarlu, K and Rajinikanth, V and Naveen, T and Sinha, D P and Atiquzzaman, and Ray, Ajoy K (2009) Abrasive wear behavior of thermally sprayed diamond reinforced composite coating deposited with both oxy-acetylene and HVOF techniques. Wear, 266 (9-10). pp. 995-1002.

Venkateswarlu, K and Rajinikanth, V and Sirkar, M K and Atiquzzaman, and Sinha, D P and Das, S K (2008) High stress abrasive wear behavior of coal mill liner materials - A model based factorial design. Journal of Metallurgy and Materials Science, 50 (3). pp. 151-166.

Rajinikanth, V and Arora, Gaurav and Narasaiah, N and Venkateswarlu, K (2008) Effect of repetitive corrugation and straightening on Al and Al–0.25Sc alloy. Materials Letters, 62 (2). pp. 301-304.

Rajinikanth, V and Jindal, Vikas and Akkimardi, V G and Ghosh, M and Venkateswarlu, K (2007) Transmission electron microscopy studies on the effect of strain on Al and Al–1% Sc alloy. Scripta Materialia, 57 (5). pp. 425-428.

Kumar, Sanjay and Bandopadhyay, A and Rajinikanth, V and Alex, T C and Kumar , Rakesh (2004) Improved processing of blended slag cement through mechanical activation. Journal of Materials Science, 39 (10). pp. 3449-3452.

Conference or Workshop Item

Rajinikanth, V and Husain, M M and Ray, Ajoy K (2010) Difffusion bonding of non weldable high alloy steel. In: National Welding Meet , August 2010, Puducherry.

Venkateswarlu, K and Rajinikanth, V and Ray, Ajoy K (2008) High Strength Aluminium Alloys with Emphasis on Scandium Addition. In: Training Programme on Special Metal Casting and Forming Processes - (CAFP-2008), Feb. 25-26, 2008, NML, Jamshedpur.

Ghosh Chowdhury, S and Rajinikanth, V (2008) Thermomechanical Processing of Metals and Alloys. In: Training Programme on Special Metal Casting and Forming Processes - (CAFP - 2008), Feb. 25-26, 2008, NML, Jamshedpur.

Project Reports

Metya, Avijit Kumar and Rajinikanth, V and Prakash, Amit and Das, S K (2011) Failure Analysis of Compressor Blade of SU-30MKI(SB-142). Other (TMP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Metya, Avijit Kumar and Rajinikanth, V and Prakash, Amit and Parida, N (2011) Metallurgical Analysis of 1st Stage LPC Compressor Blade of SU-30 MKI SB-062 (No.25). Sponsored (SSP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Rajinikanth, V and Munda, Parikshit and Mandal, D and Minj, R K and Das, Swapan K and Ghosh Chowdhury, S and Singh, S R (2009) Development and Evaluation of Wear Resistant Material. Exploratory (OLP). NML, Jamshedpur. (Submitted)

Rajinikanth, V and Ray, Ajoy K and Das, Goutam and Ghosh, M and Das, Swapan K and De, P K (2008) Strain Hardening behavior of Al-Sc alloys. Exploratory (OLP). NML, Jamshedpur. (Submitted)

This list was generated on Wed Feb 26 11:42:40 2020 IST.