Items where Author is "Palit Sagar, S"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 67.

Article

Ghosh, Arpita and Sahu, M and Singh, P K and Kumar, S and Ghosh, M and Palit Sagar, S (2019) Assessment of Mechanical Properties for Dissimilar Metal Welds: A Non-destructive Approach. Journal of Materials Engineering and Performance, 28(2) (IF-1.476). pp. 900-907.

Sahu, M K and Dutta, Chandan and Ghosh, Arpita and Palit Sagar, S (2019) A Digital Image Processing Tool for Size and Number Density Distribution of Precipitates in Creep-Exposed Material. Soft Computing for Problem Solving . pp. 653-659.

Thanseer, P M and Metya, A K and Palit Sagar, S (2017) Development of a Non-collinear Nonlinear Ultrasonic-Based Technique for the Assessment of Crack Tip Deformation. Journals of Materials Engineering and Performance, 26(6) (IF-1.331). pp. 2632-2639.

Ghosh, Arpita and Sharma, Arun Kumar and Nayak, B and Palit Sagar, S (2014) Infrared thermography: An approach for iron ore gradation. Minerals Engineering, 62 (IF-1.714). pp. 85-90.

Palit Sagar, S and Murthy, G V S and Das, T K and Prakash, Amit and Goel, U S and Venugopalan, T (2013) Surface Wave Based Ultrasonic Technique for finding the Optimal Grinding Condition of High Speed Steel (HSS) Work Rolls. Steel Research International, 84(2) . pp. 163-168.

Ghosh, Arpita and Das, T K and Nayak, B and Palit Sagar, S (2013) A non-invasive technique for sorting of alumina-rich iron ores. Minerals Engineering, 45(55–58) (IF-1.207). pp. 55-58.

Palit Sagar, S and Miyasaka, C and Ghosh, M and Tittmann, B R (2012) NDE of friction stir welds of Al alloys using high-frequency acoustic microscopy. Non-destructive Testing and Evaluation, 27(4) (IF-0.827). pp. 375-389.

Mazumder, Rajat and Bandyopadhyay, N R and Palit Sagar, S (2012) Detection and quantification of lack-of-penetration in Al-Al friction stir welded plates using phased array ultrasonic technique. Journal of Non-destructive Testing & Evaluation, 10 (4). pp. 47-52.

Panda, A K and Metya, Avijit Kumar and Bar, H N and Roy, Rajat K and Murthy, G V S and Palit Sagar, S and Mitra, A (2012) Non-destructive evaluation for structural health assessment. Science and Culture .

Palit Sagar, S and Metya, Avijit Kumar and Ghosh, M and Sivaprasad, S (2011) Effect of microstructure on non-linear behavior of ultrasound during low cycle fatigue of pearlitic steels. Materials Science and Engineering A, 528 (6). pp. 2895-2898.

Panda, A K and Sharan, P K and Murthy, G V S and Roy, P K and Palit Sagar, S and Mitra, A (2011) Generation of Guided Waves Using Magnetostrictive Nanostructured Sensing Elements for Pipe Inspection. Journal of Non Destructive Testing and Evaluation, 10 (3). pp. 6-9.

Chakraborty , G and Pal, T K and Palit Sagar, S and Parida , N (2011) Non Destructive Characterization Of Resistance Spot Welded Joints By Ultrasonic Technique. Indian Welding Journal, 44 (1). pp. 30-36.

Palit Sagar, S and Hua , Jia Jerry and Rose, Joseph (2010) Ultrasonic Guided Wave Phased Array Inspection of Pipelines. Journal of Non destructive Testing & Evaluation, 9 (2). pp. 33-36.

De, Santanu and Palit Sagar, S and Dey, Swapna and Prakash, Amit and Chattoraj, I (2010) Quantification of pitting in two tempers of 7075 aluminium alloy by non-destructive evaluation. Corrosion Science, 52 (5). pp. 1818-1823.

Nayar, S and Palit Sagar, S and Guha, Avijit (2010) Non-destructive evaluation of mechanical properties of poly (vinyl) alcohol-hydroxyapatite nanocomposites. Journal of Materials Science-Materials in Medicine, 21 (4). pp. 1099-1102.

Metya, Avijit Kumar and Ghosh, M and Parida, N and Palit Sagar, S (2008) Higher harmonic analysis of ultrasonic signal for ageing behaviour study of C-250 grade maraging steel. NDT & E International, 41 (6). pp. 484-489.

Palit Sagar, S and Ravi Kumar, B and Ghosh Chowdhury, S and De, P K and Ghosh, R N (2008) Determination of crystallographic texture in cold-rolled copper and stainless steel by spectrum analysis of ultrasonic signal. Scripta Materialia, 58 (7). pp. 595-598.

Sen, S and Mishra, Suman K and Palit Sagar, S and Das, Swapan K and Tarafder, A (2008) Impedance analysis of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 ceramic. Journal of Alloys and Compounds, 453 (1-2). pp. 395-400.

Sen, S and Mishra, Suman K and Palit Sagar, S and Das, Swapan K (2008) Preparation and characterization of PMN-PT nanocomposite. Indian Journal Of Engineering And Materials Sciences , 15 (2). pp. 111-115.

Metya, A and Ghosh, M and Parida, N and Palit Sagar, S (2008) Higher harmonic analysis of ultrasonic signal for ageing behaviour study of C-250 grade maraging steel. NDT & E International, 41 . pp. 484-489.

Palit Sagar, S and Metya, Avijit Kumar and Parida, N and Ghosh, R N (2008) Nonlinear ultrasonic to assess localized plastic deformation during high cycle fatigue. Review Of Progress In Quantitative Nondestructive Evaluation, Vol 27a And 27b Book Series: AIP Conference Proceedings, 975 . pp. 1260-1266.

Metya, Avijit Kumar and Parida, N and Bhattacharya, D K and Bandopadhyay, N R and Palit Sagar, S (2007) Assessment of Localized Plastic Deformation during Fatigue in Polycrystalline Copper by Nonlinear Ultrasonic. Metallurgical and Materials Transactions A, 38 (12). pp. 3087-3092.

Bahadur, Aruna and Mitra, A and Ravi Kumar, B and Palit Sagar, S (2007) Evaluation and Correlation of Residual Stress Measurement in Steel. Evaluation and Correlation of Residual Stress Measurement in Steel , 26 (2-4). pp. 47-55.

Kar, Abhijit and Palit Sagar, S and Ray, Ajoy K (2007) Characterization of the ceramic–metal brazed interface using ultrasonic technique. Materials Letters, 61 (19-20). pp. 4169-4172.

Palit Sagar, S and Das, S and Parida, N and Bhattacharya, D K (2006) Non-linear ultrasonic technique to assess fatigue damage in structural steel. Scripta Materialia, 55 (2). pp. 199-202.

Palit Sagar, S and Das, S and Parida, N and Bhattacharya, D K (2006) Non-linear ultrasonic technique to assess fatigue damage in structural steel. Scripta Materialia, 55 (2). pp. 199-202.

Palit Sagar, S and Ravi Kumar, B and Dobmann, G and Bhattacharya, D K (2005) Magnetic characterization of cold rolled and aged AISI 304 stainless steel. NDT & E International, 38 (8). pp. 674-681.

Palit Sagar, S and Parida, N and Das, S and Dobmann, G and Bhattacharya, D K (2005) Magnetic Barkhausen emission to evaluate fatigue damage in a low carbon structural steel. International Journal of Fatigue, 27 (3). pp. 317-322.

Palit Sagar, S and Parida, N and Das, Samar and Dobmann, G and Bhattacharya, D K (2005) Magnetic Barkhausen emission to evaluate fatigue damage in a low carbon structural steel. International Journal of Fatigue, 27 (3). pp. 317-322.

Ray, A K and Tarafder, S and Das, D K and Venkatraman, B and Roy, P K and Goswami, B and Tiwari, Y N and Palit Sagar, S and Ranganath, V R and Das, Goutam and Chaudhuri, S and Ghosh, R N (2004) Damage resistance of thermal barrier coated superalloy in combustion chamber liner. Journal of Metallurgy and Materials Science, 46 (4). pp. 205-212.

Mitra, A and Palit Sagar, S and Manik, N B (2002) Magnetic Barkhausen emission study in heat-treated Fe-Nb-Cu-Si-B alloy. IEEE Transactions on Magnetics, 38 (6). pp. 3669-3674.

Palit Sagar, S and Chattoraj, I and Mitra, A (1999) The generation of magnetic bistability in annealed Fe-Si-B fibre by hydrogenation. Journal of Physics D-Applied Physics , 32 (5). pp. 541-545.

Mitra, A and Palit Sagar, S and Chattoraj, I (1998) Crystallization and magnetic behaviour of Fe-Nb-Cu-Si-B alloys. Philosophical magazine b-physics of condensed matter statistical mechanics electronic optical and magnetic properties, 77 (6). pp. 1681-1691.

Palit Sagar, S and Chattoraj, I and Rao, Venkatesh and Ghatak, S K and Mitra, A (1997) Influence of hydrogen on the magnetic properties of amorphous Fe---Si---B fibres. Journal of Magnetism and Magnetic Materials, 166 (1-2). pp. 186-192.

Palit Sagar, S and Chattoraj, I and Rao, Venkatesh and Ghatak, S K and Mitra, A (1997) Influence of hydrogen on the magnetic properties of amorphous Fe-Si-B fibres (vol 166, pg 186, 1997). Journal of Magnetism and Magnetic Materials, 172 (3). pp. 322-323.

Conference or Workshop Item

Sahu, Minati Kumari and Dutta, Chandan and Ghosh, Arpita and Palit Sagar, S (2017) A Digital Image Processing Tool for size and number density distribution of precipitates in creep exposed material. In: Soft computing for problem solving (SOCPROS 2017), 23-24th December 2017, IIT Bhubaneswar.

Metya, Avijit Kr and Palit Sagar, S and Ghosh Chowdhury, S (2014) Evaluation of Crystallographic Texture in SS316L Steel by Ultrasonic Signal Analysis. In: National Conference on Nondestructive Evaluation (NDE-2014), 04-06 Dec 2014, Pune.

Palit Sagar, S (2014) Non-linear ultrasonic for structural damage assessment: Approach at CSIR-National Metallurgical Laboratory. In: Workshop on current and future trends of Non-linear ultrasonic technique for NDE, 21-24 Oct, 2014, Seoul, Korea.

Kumar D, Satish and Das, T K and Justin Joseyphus, R and Ghosh, Arpita and Palit Sagar, S and Mandal, S K (2013) Development of Online Defect Detection System for High End Wires. In: APCNDT 2013, , 18 - 22 November 2013, Renassiance Convention Centre, Mumbai..

Ghosh, Arpita and Das, T K and Cherian, Antony and Reddy, S and Mukherjee, R and Palit Sagar, S (2013) An Infrared Imaging System for Compositional Analysis of Iron Ore. In: APCNDT 2013, 18 - 22 November 2013, Renassiance Convention Centre, Mumbai. (Submitted)

Ghosh, Arpita and Sharma, A K and Nayak, B and Ghosh, T K and Palit Sagar, S (2013) Infrared Thermography for Iron Ore Grading. In: Physical Separation'13, 20-21st June, 2013, Falmouth, Cornwall, UK.

Palit Sagar, S and Parida, N (2012) Centre for Non-destructive Evaluation at CSIR-National Metallurgical Laboratory, Jamshedpur for materials characterisation and damage evaluation: an Overview. In: 18th World Conference on NDT, 18th WCNDT, 16-20 April, 2012, Durban, South Africa.

Sheethal, S and Giridharan S Sanjay, N V and Metya, Avijit Kumar and Chacko, E Z and Singh, D K and Chandra, Sanjay and Palit Sagar, S (2012) Evaluation and Optimization of Electromagnetic Stirring (EMS) Parameters for Continuously Cast High Carbon Billet Quality using Ultrasonic C-Scan Imaging. In: National Seminar on NDE 2012, December 10 -12, 2012, Ghaziabad, Delhi.

Sharma, Arun Kumar and Ghosh, Arpita and Das, T K and Joseyphus, R Justin and Palit Sagar, S (2012) To Establish the Feasibility of IR Thermography for Sorting of Iron Ores for Identifying & Rejecting Alumina Rich Ores. In: NDE 2012, 10th -13th December, 2012, New Delhi India.

Parida, N and Palit Sagar, S (2011) Non-destructive Testing and Evaluation at CSIR-National Metallurgical Laboratory, Jamshedpur for Iron and Steel Industry: an Overview. In: International Conference on NDE for Steel& Allied Industries, 2-3 December, 2011, SNTI, Jamshedpur.

Venugopalan, T and Palit Sagar, S (2011) Need of Improved Non-Destructive Technique for the Surface Condition Monitoring of High Speed Steel (HSS) Work Rolls. In: NDESAI-2011, December 2-3, 2011, Tata Steel, Jamshedpur, India.

Palit Sagar, S and Prakash, Amit and Bandyopadhyay, D and Parida, N (2011) Feasibility of using ultrasonic technique to measure the blast furnace lining thickness. In: Advances in Analytical Techniques and Characterisation of Materials, July 5-7, 2011, RDCIS, Ranchi.

Palit Sagar, S and Metya, Avijit Kumar and Dey, Swapna and Chattoraj, I (2008) Pitting Stochastic Study in Airframe Aluminium Alloy using Non-linear Ultrasonic. In: 17th World Conference on Nondestructive Testing, 25-28 Oct., 2008, Shanghai, China. (Submitted)

Palit Sagar, S (2008) Modern Ultrasonic Technique for Defect Detection in Cast Materials. In: Training Programme on Special Metal Casting and Forming Processes-(CAFP-2008), Feb. 25-26, 2008, NML, Jamshedpur.

Palit Sagar, S (2008) Advanced ultrasonic for remaining life assessment of industrial components. In: Remaining Life Assessment of Aged Components in Thermal Power Plants and Petrochemical Industries, 2008, NML Jamshedpur 831007, India.

Mitra, A and Palit Sagar, S and Rao, V and Chattoraj, I (1997) Electrical, Magnetic and Electrochemical Behaviour of Nanocrystalline Fe70.5Nb4.5Cu1Si16B8 Alloy. In: Proceedings of Golden Jubilee International Conference on Recent Advances in Metallurgical Processes Vol-1, 16-19 July 1997, IIS, Bangalore.

Patent

CSIR-NML (2012) A non-invasive process for sorting of alumina rich iron ores. 0060NF2012.

1423/KOL/2011 Dt. 4.11 .2011 (2011) An improved ultrasonic inspection system for surface and sub-surface crack detection of HSS Rolls - Application No.1423/KOL/2011 Dt. 4.11 .2011. Patent Ref.No : PAT-0386/2011/India .

US2002000045033 (2003) Sensing device for the non-destructive evaluation of steel structures or components. US6617847.

Project Reports

Palit Sagar, S and Ravi Kumar, B and Murthy, G V S and Metya, Avijit Kumar and Prakash, Amit and Mahato, B (2013) Evaluation of Residual Stress of HSS Rolls by Ultrasonic and X-ray diffraction based techniques. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)

Palit Sagar, S and Metya, Avijit Kumar and Prakash, Amit and Das, Arpan (2013) Development of Methodology to Analyse the Amplitude of Ultrasonic Signal from Shell/Core Interface of ICDP Rolls. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Palit Sagar, S and Prakash, Amit and Metya, Avijit Kumar (2013) Determination of modulus of Aluminium alloy by ultrasonic technique. Sponsored (SSP). Internal Report, Jamshedpur.

Pansari, Avinaw and Palit Sagar, S (2013) Development of an Online IR-Thermography based Non-Invasive Technique to Detect and Estimate Iron in Galvannealed IF Steel Sheet. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Palit Sagar, S and Parida, N (2013) Quality Assessment of Coated Rear Housing Component by Ultrasonic Technique. Consultancy (CNP). CSIR-NML.

Ghosh, Arpita and Palit Sagar, S and Das, T K and Nayak, B (2012) Development of advanced sensor-based technique for iron-ore beneficiation. Exploratory (OLP). CSIR- National Metallurgical Lab, Jamshedpur. (Submitted)

Metya, Avijit Kumar and Prakash, Amit and Palit Sagar, S (2012) Evaluation of Equiaxed zone in Continuously Cast (CC) Billets using Ultrasonic C-Scan Imaging. Sponsored (SSP). NML, Jamshedpur.

Vikash, Avijeet and Metya, Avijit Kumar and Palit Sagar, S (2011) Application of Ultrasonic Technique for Materials property evaluation. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Supriya, and Prakash, Amit and Metya, Avijit Kumar and Palit Sagar, S (2011) Application of Ultrasonic Waves in Non-Destructive Testing and Evaluation. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Palit Sagar, S and Murthy, G V S and Das, T K and Prakash, Amit (2011) Development of Ultrasonic Technique for Surface Crack Detection of Semi-HSS and HSS Rolls. Collaborative (CLP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Sankara Narayanan, T S N and Satendra, Kumar and Palit Sagar, S (2009) Studies on the fretting corrosion behaviour of titanium alloys and development of fretting corrosion maps (OLP-0094). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Bar, H N and Parida, N and Palit Sagar, S and Ghosh, R N (2007) Evaluation of Prototype Horton Sphere using Acoustic Emission. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Palit Sagar, S and Ghosh Chowdhury, S and Ravi Kumar, B and De, P K and Parida, N and Ghosh, R N (2006) Crystallographic Texture determination in deformed materials by Ultrasonic Technique. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

This list was generated on Thu Jul 9 14:31:01 2020 IST.