Items where Author is "Mukhopadhyay, N K"

Article

Shivam, V and Kar, Shubhada and Mandal, G K and Srivastava, V C and Mukhopadhyay, N K (2023) Microstructural Evolution and Mechanical Properties of Fe-Containing High and Medium Entropy Alloys: Recent Advances and Future Prospects. Transactions of the Indian Institute of Metals .

Shivam, V and Kar, S and Bansal, G K and Chandan, A K and Sahoo, Biraj K and Mandal, G K and Mukhopadhyay, N K and Srivastava, V C (2023) A novel Fe-rich non-equiatomic medium-entropy alloy with superior mechanical properties. Journal of Alloys and Compounds, 952 .

Pradhan, Priyatosh and Shadangi, Y and Shivam, V and Mukhopadhyay, N K (2022) Powder metallurgical processing of CrMnFeCoMo high entropy alloy: Phase evolution, microstructure, thermal stability and mechanical properties. Journal of Alloys and Compounds, 935 Part 2 .

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2016) Inverse Hall-Petch like behaviour in a mechanically milled nanocrystalline Al5Fe2 intermetallic phase. Philosophical Magzine, 96(23) (IF-1.350). pp. 2445-2456.

Mukhopadhyay, N K and Uhlenwinkel, V and Srivastava, V C (2015) Synthesis and Characterization of Bulk Al-Cu-Fe Based Quasicrystals and Composites by Spray Forming. Journal of materials engineering and performance, 24(6) (IF-0.98). pp. 2172-2178.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2015) Comparative Studies on Al-Based Composite Powder Reinforced with Nano Garnet and Multi-wall Carbon Nanotubes. Journal of Materials Engineering and Performance, 24(11) (IF-0.998). pp. 4200-4205.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2015) Effect of Milling Time on Structural Evolution and Mechanical Properties of Garnet Reinforced EN AW6082 Composites. Metallurgical and Materials Transaction A, 46A(3) (IF-1.730). pp. 1360-1373.

Basariya, M R and Roy, Rajat K and Pramanick, A K and Srivastava, V C and Mukhopadhyay, N K (2015) Structural transition and softening in Al-Fe intermetallic compounds induced by high energy ball milling. Materials science and engineering a-structural materials properties microstructure and processing, 638 (IF-2.567). pp. 282-288.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2014) Microstructural characteristics and mechanical properties of carbon nanotube reinforced aluminum alloy composites produced by ball milling. Materials & Design, 64 (IF-3.171). pp. 542-549.

Mukhopadhyay, N K and Ali, F and Scudino, S and Khoshkhoo, M S and Stoica, M and Srivastava, V C and Uhlenwinkel, V and Vaughan, G and Suryanarayana, C and Eckert, J (2014) Inverse Hall Petch Like Mechanical Behaviour in Nanophase Al-Cu-Fe Quasicrystals: A New Phenomenon. Acta Physica Polonica A , 126(2) (IF-0.604). pp. 543-548.

Srivastava, V C and Saarivirta, E H and Cui, C and Uhlenwinkel, V and Schulz, A and Mukhopadhyay, N K (2014) Bulk synthesis by spray forming of Al–Cu–Fe and Al–Cu–Fe–Sn alloys containing a quasicrystalline phase. Journal of Alloys and Compounds, 597 (IF-2.407). pp. 258-268.

Mukhopadhyay, N K and Ali, F and Scudino, S and Khoshkhoo, M S and Stoica, M and Srivastava, V C and Uhlenwinkel, V and Vaughan, G and Suryanarayana, C and Eckert, J (2013) Grain size softening effect in Al62.5Cu25Fe12.5 nanoquasicrystals. Applied Physics Letters, 103 (IF-3.79). p. 201914.

Ray, M K and Bagani , K and Sardar, M and Banerjee, S and Srivastava, V C and Mukhopadhyay, N K (2013) Electrical and magnetic property of Al 62 Cu 25.5 Fe 12.5 icosahedral quasicrystal: Spin-orbit scattering. AIP Conference Proceedings, 1512 . pp. 994-995.

Ali, F and Scudino, S and Gorantla, S M and Srivastava, V C and Shahid, H R and Uhlenwinkel, V and Stoica, M and Vaughan, G and Mukhopadhyay, N K and Eckert, J (2013) Mechanically driven phase transformation in single phase Al 62.5 Cu 25 Fe 12.5 quasi-crystals: Effect of milling intensity. Acta Materialia, 61 (IF-3.94). pp. 3819-3830.

Ali, F and Scudino, S and Liu, G and Srivastava, V C and Mukhopadhyay, N K and Khoshkhoo, M S and Prashanth, K G and Uhlenwinkel, V and Calin, M and Eckert, J (2012) Modeling the strengthening effect of Al–Cu–Fe quasicrystalline particles in Al-based metal matrix composites. Journal of Alloys and Compounds, 536S . S130-S133.

Mukhopadhyay, N K and Ali, F and Srivastava, V C and Yadav, T P (2011) Strain-induced structural transformation of single-phase Al-Cu-Fe icosahedral quasicrystal during mechanical milling. Philosophical Magazine, 91 (19-21). pp. 2482-2490.

Sasikumar, C and Mukhopadhyay, N K and Mehrotra, S P (2009) Energetics of mechanical activation – Application to ilmenite. Minerals Engineering, 22 (6). pp. 572-574.

Srivastava, V C and Uhlenwinkel, V and Schulz, A and Zoch, H -W and Mukhopadhyay, N K and Ghosh Chowdhury, S (2008) Synthesis of single phase i-AlCuFe bulk quasicrystal by spray forming. Zeitschirft fuer Kristallographie, 223 . pp. 711-715.

Sasikumar, C and Rao, D S and Srikanth, S and Mukhopadhyay, N K and Mehrotra, S P (2007) Dissolution studies of mechanically activated Manavalakurichi ilmenite with HCl and H2SO4. Hydrometallurgy, 88 (1-4). pp. 154-169.

Das, Swapan K and Mukhopadhyay, N K and Ravi Kumar, B and Bhattacharya, D K (2007) Failure analysis of a passenger car coil spring. Engineering Failure Analysis, 14 (1). pp. 158-163.

Sasikumar, C and Rao, D S and Srikanth, S and Ravi Kumar, B and Mukhopadhyay, N K and Mehrotra, S P (2004) Effect of mechanical activation on the kinetics of sulfuric acid leaching of beach sand ilmenite from Orissa, India. Hydrometallurgy, 75 (1-4). pp. 189-204.

Mukhopadhyay, N K and Bhatt, Jatin and Pramanick, A K and Murty, B S and Paufler, P (2004) Synthesis of nanocrystalline/quasicrystalline Mg32(Al,Zn)49 by melt spinning and mechanical milling. Journal of Materials Science, 39 (16-17). pp. 5155-5159.

Mukhopadhyay, N K and Kurup, Vinod and Srivastava, V C and Joshi, P B and Mandal, R K (2004) High energy ball milling of a Al65Cu20Fe15 quasicrystalline alloy. Journal of Non-Crystalline Solids, 334-335 . pp. 52-56.

Mukhopadhyay, N K and Murthy, G V S and Murty, B S and Weatherly, G C (2002) An investigation on the transformation of the decagonal phase to a B2 phase in Al-Cu-Co alloy during mechanical milling. Journal of Alloys and Compounds , 342 (1-2). pp. 38-41.

Mukhopadhyay, N K and Murthy, G V S and Murty, B S and Weatherly, G C (2002) An investigation on the transformation of the decagonal phase to a B2 phase in Al-Cu-Co alloy during mechanical milling. Journal of Alloys and Compounds, 342 (1-2). pp. 38-41.

Mukhopadhyay, N K and Murthy, G V S (2002) An investigation on the transformation of the decagonal phase to a B2 phase in Al–Cu–Co alloy during mechanical milling. Journal of Alloys and Compounds, 342 (1-2). pp. 38-41.

Mukhopadhyay, N K and Murthy, G V S and Murty, B S and Weatherly, G C (2002) Transformation of the decagonal quasicrystalline phase to a B2 crystalline phase in the Al-Cu-Co system by high-energy ball milling. Philosophical Magazine Letters Online ISSN 1362-3036, 82 (7). pp. 383-392.

Pramanick, A K and Mukhopadhyay, N K (2000) Aperiodic-2000. Current Science, 79 (12). pp. 1637-1643.

Mukhopadhyay, N K and Sridhar, G and Parida, N and Tarafder, S and Ranganath, V R (1999) Hydrogen embrittlement failure of hot dip galvanised high tensile wires. Engineering Failure Analysis, 6 (4). pp. 253-265.

Mukhopadhyay, N K and Ghosh Chowdhury, S and Sinha, R K and Bhattacharya, D K and Chaudhuri, S (1999) Remaining life estimation of a service exposed economiser tube. Engineering Failure Analysis, 6 (4). pp. 233-243.

Sridhar, G and Das, Swapan K and Mukhopadhyay, N K (1999) Failure analysis of low carbon free-cutting steel wire rods. Engineering Failure Analysis, 6 (3). pp. 155-172.

Murthy, G V S and Ray, Ashok K and Minj, R K and Mukhopadhyay, N K (1999) Microhardness and Fracture Toughness Studies of Decagonal Quasicrystal in Al-Cu-Co System. Journal of Materials Science Letters, 18 (3). pp. 255-258.

Ray, Ashok K and Mukhopadhyay, N K and Bhattacharya, D K and Dwarakadasa, E S and Parida, N (1999) Studies on indentation fracture toughness on ceramic and ceramic composite using acoustic emission technique. Bulletin of Materials Science, 22 (1). pp. 25-32.

Ghosh Chowdhury, S and Mukhopadhyay, N K and Das, Goutam and Das, Swapan K and Bhattacharya, D K (1998) Failure analysis of aweld repaired steam turbine casing. Engineering Failure Analysis, 5 (3). pp. 205-218.

Mukhopadhyay, N K and Ghosh Chowdhury, S and Das, Goutam and Chattoraj, I and Das, S K and Bhattacharya, D K (1998) An investigation of the failure of low pressure steam turbine blades. Engineering Failure Analysis, 5 (3). pp. 181-193.

Mukhopadhyay, N K and Das, Swapan K and Ravi Kumar, B and Ranganath, V R and Ghosh Chowdhury, S (1997) Premature failure of a leaf spring due to improper materials processing. Engineering Failure Analysis, 4 (3). pp. 161-170.

Mukhopadhyay, N K and Sinha, Arvind (1997) Quasicrystals. Current Science, 73 (7). pp. 558-560.

Mukhopadhyay, N K and Chattopadhyay, K and Ranganathan, S (1996) Ordering transformation in icosahedral quasicrystals and related crystalline phases. Bulletin of Materials Science, 19 (5). pp. 717-723.

Mitra, A and Ravi Kumar, B and Mukhopadhyay, N K and Murthy, G V S and Das, Swapan K and Bhattacharya, D K (1996) Residual stress evaluation in service exposed shot peened spring by micromagnetic and XRD techniques. Trends in nde science and technology - proceedings of the 14th world conference on ndt (14th wcndt),, 1-5 ( ). pp. 879-882.

Conference or Workshop Item

Srivastava, V C and Saarivirta, E.H. and Cui, C and Uhlenwinkel, V and Schulz, A and Mukhopadhyay, N K (2013) Development of bulk quasicrystalline materials by spray forming. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Chaubey, A K and Mishra, B K and Mukhopadhyay, N K and Mukherjee, P S (2011) Effect of compact density and preheating temperature of the Al-Ti-C Preform on the fabrication of in-situ Mg–TiC composites. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Yadav, T P and Mukhopadhyay, N K and Tiwari, R S and Srivastava, O N (2011) Mechanically induced phase transformation in Al-Cu- Fe-Cr decagonal Quasicrystalline alloy by high-energy ball milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mukhopadhyay, N K (2011) Synthesis of nanocrystalline and amorphous phases in complex metallic alloys during mechanical milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Srivastava, V C and Uhlenwinkel, V and Schulz, A and Zoch, H -W and Mukhopadhyay, N K and Ghosh Chowdhury, S (2008) Synthesis of the Single Phase i-AlCuFe Bulk Quasicrystal by Spray Forming. In: Tenth international conference on Quasicrystals (ICQ10), July 7-11, 2008, Zurich, Switzerland.

Mukhopadhyay, N K (1997) Failures due to hydrogen embrittlement. In: UNSPECIFIED.

Mukhopadhyay, N K (1995) Basic Principles in Physical Metallurgy - II. In: Experimantal Techniques in Industrial Metallography[ETIM-95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory(CSIR), Jamshedpur.

Mukhopadhyay, N K and Weatherly, G C and Embury, J D (1995) Electron microscopy of decagonal phases in Al-Cu-Co-Si system. In: 5th International Conference on Quasicrystals, MAY 22-26, 1995, AVIGNON, FRANCE.

Project Reports

Sasikumar, C and Srikanth, S and Mukhopadhyay, N K and Rao, D S and Ravi Kumar, B and Das, Swapan K and Mehrotra, S P (2006) Enhanced Liberation and Acid Leaching Kinetics of Ilmenite through Mechno-Chemical processing. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)