Items where Author is "Das, S"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 22.

Article

Singhbabu, Y N and Sivakumar, B and Choudhary, Shyam K and Das, S and Sahu, Ranjan K (2018) Corrosion-protective reduced graphene oxide coated cold rolled steel prepared using industrial setup: A study of protocol feasibility for commercial production. Surface and Coatings Technology, 349 (IF-2.906). pp. 119-132.

Konar, J and Kumari, Smita and Das, S and Ranjan, Rajeev (2018) Analysis of major and trace elements of electronic waste materials using microwave digestion and AAS, ICP techniques. Journal of Metallurgy and Materials Science, 60/1 . pp. 21-24.

Singhbabu, Y N and Choudhary, Shyam K and Shukla, N and Das, S and Sahu, Ranjan K (2015) Observation of large positive magneto-resistance in bubble decorated graphene oxide films derived from shellac biopolymer: a new carbon source and facile method for morphology-controlled properties†. Nanoscale, 7 (IF-6.739). pp. 6510-6519.

Biswas, Piyalee and Das, S and Sarkar, Paromita and Choudhary, Kamal and Baidya, Prasanta and Giri, P and Ghosal, A and Bandyopadhyay, A K (2013) Rectificaton of Energy transport in nonlinear metamaterials via ratchets. Journal of Physics D-Applied Physics, 46(20) (IF-2.528).

Das, Swapan K and Sivaprasad, S and Das, S and Tarafder, S (2006) The effect of variation of microstructure on fracture mechanics parameters of HSLA-100 steel. Materials Science and Engineering A, 431 (1-2). pp. 68-79.

Palit Sagar, S and Das, S and Parida, N and Bhattacharya, D K (2006) Non-linear ultrasonic technique to assess fatigue damage in structural steel. Scripta Materialia, 55 (2). pp. 199-202.

Palit Sagar, S and Das, S and Parida, N and Bhattacharya, D K (2006) Non-linear ultrasonic technique to assess fatigue damage in structural steel. Scripta Materialia, 55 (2). pp. 199-202.

Ghosh, Arindam and Shukla, R and Das, S and Chatterjee, S (2006) The structure and properties of a thermo-mechanically processed low carbon high strength steel. Steel Research International , 77 (4). pp. 276-283.

Ghosh, Arindam and Das, S and Chatterjee, S and Ramachandrarao, P (2006) Effect of cooling rate on structure and properties of an ultra-low carbon HSLA-100 grade steel. Materials Characterization, 56 (1). pp. 59-65.

Palit Sagar, S and Parida, N and Das, S and Dobmann, G and Bhattacharya, D K (2005) Magnetic Barkhausen emission to evaluate fatigue damage in a low carbon structural steel. International Journal of Fatigue, 27 (3). pp. 317-322.

Mishra, Suman K and Das, S and Pathak, L C (2004) Defect structures in zirconium diboride powder prepared by self-propagating high-temperature synthesis. Materials Science and Engineering A, 364 (1-2). pp. 249-255.

Sahoo, K L and Panda, A K and Das, S and Rao, Venkatesh (2004) Crystallization study of amorphous Al87.5Ni7Mm5Fe0.5 alloy by electrical resistivity measurement. Materials Letters, 58 (3-4). pp. 316-320.

Pathak, L C and Singh, T B and Das, S and Verma, A K and Ramachandrarao, P (2002) Effect of pH on the combustion synthesis of nano-crystalline alumina powder. Materials Letters, 57 (2). pp. 380-385.

Mishra, Suman K and Das, S and Ranganathan, S (2002) Precipitation in high strength low alloy (HSLA) steel: a TEM study. Materials Science and Engineering A, 323 (1-2). pp. 285-292.

Prasad, B K and Venkateswarlu, K and Modi, O P and Jha, A K and Das, S and Dasgupta, R and Yegneswaran, A H (1998) Sliding wear behavior of some Al-Si alloys: Role of shape and size of Si particles and test conditions. Metallurgical and Materials Transactions A, 29 (11). pp. 2747-2752.

Mishra, Suman K and Das , S and Goel, R P and Ramachandrarao, P (1997) Self-propagating high temperature synthesis (SHS) of titanium carbide. Journal of Materials Science Letters, 16 (12). pp. 965-967.

Prasad, B K and Venkateswarlu, K and Das, S and Jha, A K and Dasgupta, R (1997) Influence of SiC reinforcement on the abrasive wear response of an Al-Cu alloy under conditions of varying abrasive size and applied load. Material Science letters, 16 . pp. 1113-1115.

Sinha, A N and Parida, N and Das, S and Mohanty, O N (1994) Low cycle fatigue failure of pressurised storage tank. NML Technical Journal, 36 (2). pp. 65-81.

Kumar, Rakesh and Das, S and Ray, R K and Biswas, A K (1993) Leaching of pure and cobalt bearing goethites in sulphurous acid: kinetics and mechanisms. Hydrometallurgy, 32 (1). pp. 39-59.

Narayan, S P and Rao, Venkatesh and Das, S and Mohanty, O N (1990) Microstructural and magnetic studies on thermomechanically treated hsla steel. Journal of Magnetism and Magnetic Materials, 88 (1-2). pp. 71-78.

Conference or Workshop Item

Das, S (1997) Metallography in failure prediction: an in-situ approach. In: UNSPECIFIED.

Ghose, S S and Bose, A K and Mohanty, S P and Mishra, S N and Das, S (1978) Refractories for reheating and heat treatment furnaces. In: Proceedings of a Seminar Organised by The Indian Ceramic Society, Jamshedpur Section with the co-operation of National Metallurgical Laboratory, Jamshedpur, 28-29, January 1978, NML, Jamshedpur.

This list was generated on Wed Jun 19 16:48:11 2019 IST.