Items where Author is "Das, D K"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 17.

Article

Sahu, J K and Das, D K and Nandy, T K and Mandal, D and Rajinikanth, V and Swaminathan, J and Ray, Ashok K (2011) Effect of titanium aluminide coating on cyclic plastic deformation and fatigue life of a titanium alloy at 600 °C. Materials Science and Engineering A, 530 . pp. 664-668.

Ray, Ashok K and Bose, S C and De, P K and Das, D K (2010) Lifetime evaluation of a thick thermal barrier coated superalloy used in turbine blade. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 527 (21-22). pp. 5474-5483.

Ray, Ashok K and Goswami, B and Tiwari, Y N and Das, H K and Das, D K and Kumar, Sashi Bhusan (2010) Fatigue and creep damage resistance of a thermal barrier coated superalloy for combustor liners in aero turbines. Transactions of The Indian Institute of Metals, 63 (2-3). pp. 485-491.

Ray, Ashok K and Bose, S C and De, P K and Mandal, D and Alam, H Z and Sharma, VSRA and Das, D K (2010) Evaluation of the Lifetime and Effect of Furnace Thermal Cycling on Stress Rupture Behaviour of a Thermal Barrier Coated Superalloy Used in a Turbine Blade. Canadian Metallurgical Quarterly, 49 (2). pp. 191-214.

Ray, Ashok K and Roy, Nilima and Kar, Abhijit and Ray, Ajoy K and Bose, S C and Das, Goutam and Sahu, J K and Das, D K and Venkataraman, B and Joshi, Srikanth V (2009) Mechanical property and characterization of a NiCoCrAlY type metallic bond coat used in turbine blade. Materials Science and Engineering: A, 505 (1-2). pp. 96-104.

Ray, Ashok K and Guguloth, K and Swaminathan, J and Bose, S C and Roy, Nilima and Tiwari, Y N and Roy, P K and Alam, Z and Sharma, VSRA and Joshi, Srikanth V and Venkataraman, B and Das, D K (2009) Damage Resistance of a Thermal Barrier Coated Superalloy Used in Aero Turbine Blade under Accelerated Creep Condition. High Temperature Materials And Processes, 28 (1-2). pp. 35-53.

Venkataraman, R and Singh, S Pabla and Venkataraman, B and Das, D K and Pathak, L C and Ghosh Chowdhury, S and Ghosh, R N and Ravichandra, D and Rao, G V Narasima and Nair, Keasavan and Kathirkar, Rajesh (2008) A scanning electron microscopic study to observe the changes in the growth morphology of the α phased Alumina–13 wt.% titania coatings during plasma spraying. Surface and Coatings Technology, 202 (21). pp. 5074-5083.

Ray, Ashok K and Goswami, B and Kumar, S B and Das, D and Das, Swapan K and Sharma, A and Das, D K (2008) Influence of thermally grown oxide scale on fatigue resistance of a thermal barrier coated superalloy. Canadian Metallurgical Quarterly, 47 (1). pp. 99-109.

Ray, Ashok K and Dwarakadasa, E S and Das, D K and Ranganath, V R and Goswami, B and Sahu, J K and Whittenberger, J D (2007) Fatigue behavior of a thermal barrier coated superalloy at 800°C. Materials Science and Engineering A, 448 (1-2). pp. 294-298.

Venkataraman, R and Ravi Kumar, B and Krishnamurty, R and Das, D K (2006) A study on phase stability observed in as sprayed Alumina-13 wt.% Titania coatings grown by detonation gun and plasma spraying on low alloy steel substrates. Surface and Coatings Technology, 201 (6). pp. 3087-3095.

Ray, Ashok K and Das, D K (2006) Accelerated creep resistance of thermal barrier coated superalloy. Materials Letters, 60 (25-26). pp. 3019-3022.

Ray, Ashok K and Goswami, B and Singh, M P and Das, D K and Roy, Nilima and Ravi Kumar, B and Dash, Byomkesh and Ray, Ajoy K and Das, Goutam and Rupa, P K P and Parida, N and Das, Arpan and Swaminathan, J and Dwarakadasa, E S (2006) Characterization of bond coat in a thermal barrier coated superalloy used in combustor liners of aero engines. Materials Characterization, 57 (3). pp. 199-209.

Ray, Ashok K and Roy, Nilima and Dash, Byomkesh and Das, D K and Ranganath, V R and Goswami, B and Singh, M P and Tiwari, Y N and Roy, P K and Das, H K and Sanyal, D and Dwarakadasa, E S (2006) High temperature mechanical properties of thermal barrier coated superalloy applied to combustor liner of aero engines. High Temperature Materials And Processes , 25 (3). pp. 109-119.

Venkataraman, R and Parmanick, B and Ravi Kumar, B and Pathak, L C and Das, D K and Venkataraman, B (2006) The influence of substrate on partially rapidly solidified Alumina-3 wt % titania nanocrystalline coatings deposited by plasma spray technique. Surface Engineering for Manufacturing Applications , 890 . pp. 69-75.

Ray, Ashok K and Das, D K and Venkataraman, B and Roy , P K and Goswami, B and Roy, Nilima and Das, S K and Parida, N and Tarafder, S and Chaudhuri, S and Sahay, S K and Ghosh, R N (2005) Characterization of rupture and fatigue resistance of TBC superalloy for combustion liners. Materials Science and Engineering A, 405 (1-2). pp. 194-200.

Ray, A K and Tarafder, S and Das, D K and Venkatraman, B and Roy, P K and Goswami, B and Tiwari, Y N and Palit Sagar, S and Ranganath, V R and Das, Goutam and Chaudhuri, S and Ghosh, R N (2004) Damage resistance of thermal barrier coated superalloy in combustion chamber liner. Journal of Metallurgy and Materials Science, 46 (4). pp. 205-212.

Book or NML Publication

Ray, Ashok K and Goswami, B and Kumar, S B and Das, D K (2008) Efficacy of thermal barrier coated superalloy used in turbines. In: Remaining life assessment of aged components in thermal power plants and petrochemical industries. NML, Jamshedpur, pp. 1-29. ISBN 81-87053-73-1

This list was generated on Wed Jun 19 16:28:51 2019 IST.