Items where Author is "Chowdhury, S G"

Dolzhenko, P and Odnobokova, M and Tikhonova, M and Kaibyshev, R and Chowdhury, S G and Belyakov, A (2023) Grain boundary assembly in a 316 L steel produced by selective laser melting and annealing. Materials Characterization, 206(Part: A) .

Chandan, A K and Murugaiyan, Premkumar and Chowdhury, S G (2023) Temperature-dependent stacking fault energy, deformation behavior, and tensile properties of a new high-entropy alloy. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 883 .

Sahu, V K and Tripathy, S and Chowdhury, S G and Mandal, G K (2023) On the Unified Interaction Parameter Formalism and Its Application in Critical Reassessment of Pearlitic Transformation in Fe-C-Mn System. Metallurgical and Materials Transactions A -Physical Metallurgy and Materials Science . pp. 3157-3185.

Deva, Anjana and Sahoo, Biraj K and Chowdhury, S G (2023) Boron Containing Low Carbon Deep Drawing Continuous Annealed Steel Sheet with Improved Plastic Anisotropy. Transactions of the Indian Institute of Metals .

Pradhan, S K and Tripathy, S and Singh, Rajan and Murugaiyan, Premkumar and Roy, Debdas and Humane, M M and Chowdhury, S G (2022) On the grain boundary character evolution in non equiatomic high entropy alloy during hot rolling induced dynamic recrystallization. Journal of Alloys and Compounds, 922 .

Dutt, A K and Bansal, G K and Tripathy, S and Krishna, K Gopala and Srivastava, V C and Chowdhury, S G (2022) Optimization of Selective Laser Melting (SLM) Additive Manufacturing Process Parameters of 316L Austenitic Stainless Steel. Transactions of the Indian Institute of Metals .

Tripathy, S and Sahu, V K and Jene, P S M and Tarafder, Soumitra and Chowdhury, S G (2022) On the importance of local equilibria in alloy design criteria for bulk nano-pearlitic steels and ensuing mechanical properties. Materials Science and Engineering A- Structural Materials Properties Microstructure and Processing, 841 .

Sahoo, Biraj K and Srivastava, V C and Chandan, A K and Chowdhury, S G (2022) Enhancing the properties of Al-Ni added medium Mn steel by tailoring B2-NiAl precipitates through aging treatment. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 837 .

Tripathy, S and Jena, P S M and Sahu, V K and Sarkar, S K and Ahlawat, S and Biswas, A and Mahato, B and Tarafder, Soumitra and Chowdhury, S G (2022) On the Competitive Substitutional Partitioning During Nano-pearlitic Transformation in Multicomponent Steels. Metallurgical and Materials Transactions A-Physical Metallurgical and Materials Science, 53(5) . pp. 1806-1820.

Bansal, G K and Tripathy, S and Chandan, A K and Rajinikanth, V and Ghosh, C and Srivastava, V C and Chowdhury, S G (2021) Influence of quenching strategy on phase transformation and mechanical properties of low alloy steel. Materials Science and Engineering: A, 826, article no. 141937 (5.23). pp. 1-15.

Sahoo, Biraj K and Srivastava, V C and Chandan, A K and Chhabra, H S and Chowdhury, S G (2021) Evolution of microstructure and deformation behavior in Al–Ni added medium-Mn steel processed through intercritical / cold rolling and annealing. Materials Science and Engineering A, 824 .

Tripathy, S and Chowdhury, S G (2021) On the through-process texture evolution assessment in grain oriented Fe-3 wt% Si steel produced by a novel directional inoculation technique. Scientific Reports, 11(1) .

Bansal, G K and Junior, L P and Ghosh, C and Rajnikanth, V and Tripathy, S and Srivastava, V C and Bhagat, A N and Chowdhury, S G (2020) Quench Temperature-Dependent Phase Transformations During Nonisothermal Partitioning. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials, 51(7) (IF-2.050). pp. 3410-3224.

Chandan, A K and Tripathy, S and Ghosh, M and Chowdhury, S G (2020) Evolution of Substructure of a Non-equiatomic FeMnCrCo High Entropy Alloy Deformed at Ambient Temperature (vol 50, pg 128, 2019). Metallurgical and Materials Transactions A-physical metallurgy and materials science, 51(3) (IF-2.050). p. 1438.