Items where Author is "Chaudhuri, S"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 36.

Article

Chaudhuri, S and Roy, Nilima and Ghosh, R N (2010) Assessment of creep and rupture behavior of 2.25Cr-1Mo steel — A strain based approach and its limitation. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 403-409.

Chaudhuri, S and Ghosh, R N (2009) Creep Behavior Of 2.25cr1mo Steel-Effects Of Thermal Ageing And Pre-Strain. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing , 510-11 (sl. lss). pp. 136-141.

Chaudhuri, S (2008) Philosophy of integrity assessment of engineering components. Materials Science and Engineering: A, 489 (1-2). pp. 259-266.

Kar, Abhijit and Chaudhuri, S and Sen, Pratik K and Ray, Ajoy K (2007) Evaluation of hardness of the interfacial reaction products at the alumina–stainless steel brazed interface by modeling of nanoindentation results. Scripta Materialia, 57 (9). pp. 881-884.

Ray, Ashok K and Tiwari, Y N and Roy, P K and Chaudhuri, S and Bose, S C and Ghosh, R N and Whittenberger, J D (2007) Creep rupture analysis and remaining life assessment of 2.25Cr–1Mo steel tubes from a thermal power plant. Materials Science and Engineering A, 454-455 . pp. 679-684.

Chaudhuri, S (2006) Some aspects of metallurgical assessment of boiler tubes—Basic principles and case studies. Materials Science and Engineering A, 432 (1-2). pp. 90-99.

Ray, Ashok K and Das, D K and Venkataraman, B and Roy , P K and Goswami, B and Roy, Nilima and Das, S K and Parida, N and Tarafder, S and Chaudhuri, S and Sahay, S K and Ghosh, R N (2005) Characterization of rupture and fatigue resistance of TBC superalloy for combustion liners. Materials Science and Engineering A, 405 (1-2). pp. 194-200.

Ray, A K and Tarafder, S and Das, D K and Venkatraman, B and Roy, P K and Goswami, B and Tiwari, Y N and Palit Sagar, S and Ranganath, V R and Das, Goutam and Chaudhuri, S and Ghosh, R N (2004) Damage resistance of thermal barrier coated superalloy in combustion chamber liner. Journal of Metallurgy and Materials Science, 46 (4). pp. 205-212.

Ray, Ajoy K and Tiwari, Y N and Chaudhuri, S and Ranganath, V R and Sivaprasad, S and Roy, P K and Das, Goutam and Ghosh Chowdhury, S and Kumar, P and Ghosh, R N (2002) Remaining life assessment of service exposed reheater and superheater tubes in a boiler of a thermal power plant. Engineering Failure Analysis , 21 (1-2). pp. 109-121.

Ray, Ashok K and Tiwari, Y N and Chaudhuri, S and Ranganath, V R and Sivaprasad, S and Roy, P K and Das, Goutam and Ghosh, Sabita and Kumar, P and Ghosh, R N (2002) Remaining life assessment of service exposed reheater and superheater tubes in a boiler of a thermal power plant. High Temperature Materials and Processes, 21 (1-2). pp. 109-121.

Ray, Ashok K and Tiwari, Y N and Sinha, S K and Singh, Raghubir and Chaudhuri, S (2002) Remnant life assessment of service-exposed pendent superheater tubes. Engineering Failure Analysis, 9 (1). pp. 83-92.

Roy, Nilima and Godiwalla, K M and Chaudhuri, S and Ray, Ashok K (2001) Simulation of bond coat properties in thermal barrier coatings during bending. High Temperature Materials and Processes, 20 (2). pp. 103-116.

Ray, Ashok K and Tiwari, Y N and Sinha, R K and Sinha, S K and Roy, P K and Singh, Raghubir and Chaudhuri, S (2001) Mechanical property evaluation and remaining life assessment of service-exposed steam pipe of boilers in a thermal power plant. High Temperature Materials and Processes, 20 (1). pp. 39-50.

Godiwalla, K M and Roy, Nilima and Chaudhuri, S and Ray, Ashok K (2001) Investigation and modeling of mechanical properties for thermal barrier coatings under bending. International Journal of Turbo & Jet-Engines, 18 (2). pp. 77-103.

Ray, Ashok K and Tiwari, Y N and Chaudhuri, S (2000) Evaluation of mechanical properties and assessment of residual life of a service-exposed water wall tube. Engineering Failure Analysis, 7 (6). pp. 393-402.

Ray, Ashok K and Tiwari, Y N and Sinha, R K and Chaudhuri, S and Singh, R (2000) Residual life prediction of service exposed main steam pipe of boilers in a thermal power plant. Engineering Failure Analysis, 7 (5). pp. 359-376.

Ray, A K and Tiwari, Y N and Sinha, R K and Roy, S K and Singh, R and Chaudhuri, S (2000) Mechanical Property Evaluation and Remaining Life Assessment of Service - Exposed Steam Pipe of Boilers in : Thermal Power Plant. High Temperature Materials and Process, 20 (1). pp. 1-12.

Ray, Ashok K and Tiwari, Y N and Chaudhuri, S and Tarafder, S and Singh, R (2000) Residual life assessment of FCCU reactor plate. Transactions of the Indian Institute of Metals, 53 (3). pp. 427-433.

Chaudhuri, S and Roy, Nilima and Ghosh, R N (2000) Stress rupture ductility diagram - A diagnostic tool. ISIJ International, 40 (2). pp. 207-210.

Mukhopadhyay, N K and Ghosh Chowdhury, S and Sinha, R K and Bhattacharya, D K and Chaudhuri, S (1999) Remaining life estimation of a service exposed economiser tube. Engineering Failure Analysis, 6 (4). pp. 233-243.

Ray, Ashok K and Tiwari, Y N and Sinha, A N and Sinha, R K and Singh, R and Chaudhuri, S (1998) Life prediction of service exposed reactor and distillation column materials used in a petrochemical industry. Engineering Failure Analysis, 5 (4). pp. 289-298.

Chaudhuri, S and Ghosh, R N (1998) Some aspects of mechanisms and modelling of creep behaviour of 2.25Cr-1Mo steel. ISIJ International, 38 (8). pp. 881-887.

Ghosh, R N and Chaudhuri, S and Roy, Nilima and Chattopadhyay, Lalitha (1995) Creep life extension of high-temperature components under wall thinning conditions. Sadhana-Academy Proceedings in Engineering Sciences, 20 ( ). pp. 331-339.

Ghosh, R N and Chaudhuri, S (1994) Creep strain prediction of 2-1/4-cr-1mo steel - a model-based approach. Bulletin of Materials Science, 17 (6). pp. 663-670.

Chaudhuri, S and Roy, Nilima and Ghosh, R N (1993) Modelling high temperature creep of Cr---Mo steel. Acta Metallurgica et Materialia, 41 (1). pp. 273-278.

Book or NML Publication

Sahu, J K and Swaminathan, J and Sivaprasad, S and Ray, Ajoy K and Tarafder, S and Chaudhuri, S and Ghosh, R N (2008) Use of expert system software for life monitoring of power plant components. In: Remaining Life Assessment of aged Components in Thermal Power Plants & Petrochemical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 169-181. ISBN 81-87053-73-1

Conference or Workshop Item

Selvam, S T and Chaudhuri, S and Das, Arpan and Dhara, S and Das, T P and Singh, U K (2013) Improving Productivity of Sinter Through Magnetic Segregation Chute at Sinter Plant, Bokaro Steel Plant, Bokaro Steel Plant. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Rao, K Eswara and Ramesh, M and Suresh, K and Krishna, V Rama and Rao, D V Subba and Chaudhuri, S and Chattopadhyay, U S and Sharma, K K and Gouri Charan, T and Haldar, D D (2010) Laboratory flotation studies of imported coking coal fines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Chaudhuri, S and Roy, Nilima and Ghosh, R N (2008) Assessment of creep and rupture behavior of 2.25Cr-1Mo steel – A strain-based approach and its limitation. In: 5th International Conference on Creep, Fatigue and Creep-Fatigue Interaction, September 24-26, 2008, Kalpakkam.

Chaudhuri, S (2008) Creep and life assessment of engineering components in power plants and process industries. In: UNSPECIFIED.

Ray, Ashok K and Tiwari, Y N and Sahu, J K and Swaminathan, J and Roy, P K and Sinha, S K and Das, Goutam and Ghosh Chowdhury, S and Kumar, P and Chaudhuri, S (2001) Effect of Oxide Scale Deposition on the Residual Life of Service Exposed Reheater Tubes in Boiler of a Thermal Power Plant. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Chaudhuri, S and Singh, Raghubir (1997) High temperature boiler tube failures: case studies. In: UNSPECIFIED.

Ray, Ashok K and Tiwari, Y N and Sinha, R K and Singh, Raghuvir and Chaudhuri, S (1997) Remaining life assessment of service exposed reactor and distillation column materials used in a petrochemical industry. In: Recent Advances in Metallurgical Processes - Vol I, 16-19 July 1997, I I S, Banglore.

Chaudhuri, S (1995) Life Prediction of Boiler Tubes in Corrosive Environments. In: Proccedings of the National Workshop on Boiler Corrosion (NWBC-95), April 11-12, 1995, NML, Jamshedpur.

Chaudhuri, S (1994) Heat Treatment of Stainless Steels. In: Workshop on Heat Treatment & Surface Engineering of Iron & Steels(HTIS-94), May 11-13, 1994, NML, Jamshedpur.

Thesis

Chaudhuri, S (1993) Some aspects of creep behaviour of 2.25 Cr-1Mo Steel. PhD thesis, IIT Kharagpur.

This list was generated on Tue Jul 14 11:54:01 2020 IST.