Items where Author is "Bansal, G K"

Article

Usha, Yenni and Das, Atanu and Bansal, G K and Krishna, K Gopala and Mandal, G K (2024) Heat Transfer and Fluid Flow During Laser Powder Bed Fusion of SS316L Stainless Steel. Transactions of The Indian Institute of Metals .

Roy, Rajat K and Murugaiyan, Premkumar and Bansal, G K and Krishna, K Gopala and Panda, Ashis K (2023) Structural and magnetic behaviors of Fe‑based glassy alloys prepared by industrial raw materials and different processing routes. Journal of Materials Science: Materials in Electronics, 34 (2.8). p. 2218.

Shivam, V and Kar, S and Bansal, G K and Chandan, A K and Sahoo, Biraj K and Mandal, G K and Mukhopadhyay, N K and Srivastava, V C (2023) A novel Fe-rich non-equiatomic medium-entropy alloy with superior mechanical properties. Journal of Alloys and Compounds, 952 .

Dutt, A K and Bansal, G K and Tripathy, S and Krishna, K Gopala and Srivastava, V C and Chowdhury, S G (2022) Optimization of Selective Laser Melting (SLM) Additive Manufacturing Process Parameters of 316L Austenitic Stainless Steel. Transactions of the Indian Institute of Metals .

Bansal, G K and Tripathy, S and Chandan, A K and Rajinikanth, V and Ghosh, C and Srivastava, V C and Chowdhury, S G (2021) Influence of quenching strategy on phase transformation and mechanical properties of low alloy steel. Materials Science and Engineering: A, 826, article no. 141937 (5.23). pp. 1-15.

Thakur, A K and Kumar, R R and Bansal, G K and Verma, Rahul K. and Tarafder, S and Sivaprasad, S and Mandal, G K (2021) Processing-Microstructure-Property Correlation for Producing Stretch-Flangeable Grade Dual-Phase Steel. Journal of Materials and Performance .

Chandan, A K and Sahoo, Biraj K and Bansal, G K (2021) Medium Manganese Steel: A Promising Candidate for Automotive Applications. Steel Tech, 15(2) . pp. 60-66.

Bansal, G K and Ghosh, C and Rajinikanth, V and Ghosh Chowdhury, S (2021) Effect of Finish Rolling Temperature on Microstructure and Mechanical Properties of Low-Si Steel After Quenching and Nonisothermal Partitioning. Transactions of the Indian Institute of Metals .

Bansal, G K and Chandan, A K and Ghosh, C and Srivastava, V C and Dutta, Monojit and Ghosh Chowdhury, S (2021) The Pros and Cons of an Energy-Efficient Q&P Approach to Develop Advanced Steels. Next Generation Materials and Processing Technologies, Part of the Springer Proceedings in Materials book series (SPM, volume 9) . pp. 15-26.

Bansal, G K and Chandan, A K and Srivastava, V C and Gopalakrishna, K and Das, Goutam and Rajkumar, S and Ghosh Chowdhury, S and Tarafder, S (2021) Studies on Tensile Behaviour of Selective Laser Melted 316L Stainless Steel Using SEM Straining Stage. Transactions of the Indian National Academy of Engineering . pp. 1-11.

Bansal, G K and Rajnikanth, V and Ghosh, Chiradeep and Srivastava, V C and Dutta, Monojit and Ghosh Chowdhury, S (2020) Effect of cooling rate on the evolution of microstructure and mechanical properties of nonisothermally partitioned steels. Materials Science and Engineering: A, 788 (IF-4.652). p. 139614.

Bansal, G K and Chandan, A K and Mandal, G K and Srivastava, V C (2020) High Entropy Alloys: An Overview on Current Developments" in the book "High Entropy Alloys: Innovations, Advances, and Applications. High Entropy Alloys: Innovations, Advances, and Applications (Book). pp. 1-68.

Bansal, G K and Junior, L P and Ghosh, C and Rajnikanth, V and Tripathy, S and Srivastava, V C and Bhagat, A N and Chowdhury, S G (2020) Quench Temperature-Dependent Phase Transformations During Nonisothermal Partitioning. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials, 51(7) (IF-2.050). pp. 3410-3224.

Bansal, G K and Sahoo, Biraj and Chandan, A K (2020) Metallurgical Perspective on Quench and Partitioned Advanced High Strength Steels. Steel Tech, 14(4) (NonSCI). pp. 60-64.

Bansal, G K and Jena, P S M and Ghosh, C and Srivastava, V C and Rajnikanth, V and Dutta, Monojit and Ghosh Chowdhury, S (2020) Quench Temperature-Dependent Mechanical Properties During Nonisothermal Partitioning. Metallurgical and Materials Transactions A, 51A (IF-2.050). pp. 5088-5100.

Chandan, A K and Bansal, G K and Kundu, J and Chakraborty, J and Ghosh Chowdhury, S (2019) Effect of prior austenite grain size on the evolution of microstructure and mechanical properties of an intercritically annealed medium manganese steel. Materials Science and Engineering: A , 768 (IF-4.081). p. 138458.

Bansal, G K and Srivastava, V C and Ghosh Chowdhury, S (2019) Role of solute Nb in altering phase transformations during continuous cooling of a low-carbon steel. Materials Science and Engineering: A, 767 (IF-4.081). p. 138416.

Bansal, G K and Pradeep, M and Ghosh, C and Rajnikanth, V and Srivastava, V C and Bhagat, A N and Kundu, S (2019) Evolution of Microstructure in a Low-Si Micro-alloyed Steel Processed Through One-Step Quenching and Partitioning. Metallurgical and Materials Transactions A , 50(2) (IF-1.985). pp. 547-555.

Bansal, G K and Rajnikanth, V and Ghosh, C and Srivastava, V C and Kundu, S and Ghosh Chowdhury, S (2018) Microstructure–Property Correlation in Low-Si Steel Processed Through Quenching and Nonisothermal Partitioning. Metallurgical and Materials Transactions A, 49(8) (IF-1.985). pp. 3501-3514.

Bansal, G K and Madhukar, D A and Chandan, A.K. and Ashok, K and Mandal, G K and Srivastava, V C (2018) On the intercritical annealing parameters and ensuing mechanical properties of low-carbon medium-Mn steel. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 733 (IF-4.081). pp. 246-256.