Items where Year is 2015

A

Abhilash, and Ghosh, Anirban and Pandey, B D (2015) Bioleaching of low grade granitic chalcopyrite ore by hyperthermophiles: Elucidation of kinetics-mechanism. Revue de Métallurgie, 112/5 (IF-0.176). pp. 1-14.

Abhilash, and Ghosh, Anirban and Sarkar, Supriyo and Pandey, B D (2015) Microbial Variants from Iron Ore Slimes: Mineral Specificity and pH Tolerance. Indian Journal of Microbiology, 55(4) (IF-0.899). pp. 430-449.

Abhilash, and Pandey, B D (2015) Environmental Processing of Zn Containing Wastes and Generation of Nanosized Value-Added Products. In: Bio-Nanoparticles: Biosynthesis and Sustainable Biotechnological Implications. Bio-Nanoparticles, 1 . Wiley Blackwell, Philadelphia, US, pp. 225-253. ISBN 978-1-118-67768-1

Abhilash, and Pandey, B D (2015) Microbial Extraction of Uranium from Ores. In: Microbiology for Minerals, Metals, Materials and the Environment. Taylor and Francis- CRC Press, Philadelphia, US, pp. 59-98. ISBN 9781482257298

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Agglomeration of chromite ore fines through direct sintering route. In: International Conference on “Processing of Lean Grade and Urban Ores (IC-LGO 2015), 20-22nd January 2015, Jamshedpur .

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Sintering of chromite ore fines for its utilization in arc furnace for ferrochrome production. In: 13th Iron and Steel summit, 25-26th September, 2015, Raipur, India.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Smelting characteristics of fluxed chromite sinter and its performance assessment in electric arc furnace to produce high carbon ferrochrome. Ironmaking & Steelmaking .

NA (2015) An Improved process for preparation of iron oxide pellets using sodium Lignosulphonate containing wastes and copper smelting slag replacing bentonite. NA.

Arora, Punit and Gupta, Suneel K and Bhasin, V and Singh, R K and Sivaprasad, S and Tarafder, S (2015) Fatigue studies on Carbon-steel tubes under multiaxial loading. Transactions, SMiRT-23, Manchester, United Kingdom, August 10-14, 2015, Division III (Applied Computation Simulation and Animation) . pp. 1-13.

Ashok, K and Mandal, G K and Bandyopadhyay, D (2015) Theoretical Investigation on Deoxidation of Liquid Steel for Fe–Al–Si–O System. Transactions of Indian Institute of Metals, 68 Suppl 1 (IF-0.615). pp. 9-18.

Ashok, K and Maruthupandian, K and Ganesh Kumar, K and Sundar Vishal, C (2015) Micro-mechanical Behaviour of AA2014 Alloy During Hot Tensile Testing. Transactions of Indian Institute of Metals, 68 Suppl 1 (IF-0.615). S19-S24.

B

Balusamy, T and Sankara Narayanan, T S N and Ravichandran, K and Lee, Min Ho and Nishimura, T (2015) Surface Nanocrystallization of EN8 Steel: Correlation of Change in Material Characteristics with Corrosion Behavior. Journal of The Electrochemical Society (JES), 162(6) (IF-2.859). c285-c293.

Baral, Jayashree and Swaminathan, J and Chakrabarti, D and Ghosh, R N (2015) Creep behavior of P91B steel in the presence of a weld joint. Materials Science and Engineering A, 631 (IF-2.409). pp. 220-229.

Barat, K and Metya, A and Sathpathy, S and Sivaprasad, S and Tarafder, S and Kar, Sujoy Kumar (2015) Ultrasonic quantification of high temperature cyclic damage in an advanced nickel based superalloy. Materials Science and Engineering A, 625 (IF-2.409). pp. 194-204.

Basariya, M R and Roy, Rajat K and Pramanick, A K and Srivastava, V C and Mukhopadhyay, N K (2015) Structural transition and softening in Al-Fe intermetallic compounds induced by high energy ball milling. Materials science and engineering a-structural materials properties microstructure and processing, 638 (IF-2.567). pp. 282-288.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2015) Comparative Studies on Al-Based Composite Powder Reinforced with Nano Garnet and Multi-wall Carbon Nanotubes. Journal of Materials Engineering and Performance, 24(11) (IF-0.998). pp. 4200-4205.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2015) Effect of Milling Time on Structural Evolution and Mechanical Properties of Garnet Reinforced EN AW6082 Composites. Metallurgical and Materials Transaction A, 46A(3) (IF-1.730). pp. 1360-1373.

Basavaraja, C (2015) Microwave absorption studies of polyaniline nanocomposites containing Poly (2-acrylamido-2- methyl-1-propanesulfonicacid)/graphene nanoplatelet. Journal of Metallurgy and Materials Science, 57(3) . pp. 135-141.

Basavaraja, C (2015) Partially degradable electrically conductive poly (3,4-ethylenedioxy-thiophene)/sigma cellulose polymer composites. Journal of Metallurgy and Materials Science, 57(4) . pp. 251-255.

Beena, Kumari and Sangeeta, sahney and Madhukar, A and Chattoraj, I and Sinni, Shipra (2015) Involvement and productivity of research and development workers: A case study of a publicly-funded research laboratory. International Journal of Productivity and Performance Management (previously Work Study), 64(4) . 567 - 589.

Bhagat, R P (2015) Reduction of Solid Fuel Consumption in Sintering of Indian Iron Ore. Science of Sintering, 47(2) (IF-0.58). pp. 205-213.

Bhagat, R P (2015) Study on utilisation coal fines generated in sponge iron making through pelletisation. Journal of Metallurgy and Materials Science, 57(3) . pp. 143-149.

Bhaskar Raju, G and Prabhakar, S and Subba Rao, S and Vijayakumar, T V and Vasumathi, N and Suhasini, S and Ashish Kumar, M and Shiva Kumar, S (2015) Evaluation of Flotation Collectors in Developing Zero Waste Technology for Processing Iron Ore Tailings. International journal of Engineering Research, 4(11) ( GIF-0.421). pp. 604-608.

Bhattacharya, S and Roychowdhury, Anirban and Das, D and Nayar, S (2015) Multi-functional biomimetic graphene induced transformation of Fe3O4 to ε-Fe2O3 at room temperature. RSC Advance (IF-3.84). pp. 89488-89497.

Bhattacharya, Soumya and Mishra, Swati and Gupta, P and Pranav, P and Ghosh, M and Pramanick, A K and Mishra, D P and Nayar, S (2015) Liquid phase collagen modified graphene that induces apoptosis. RSC Advances, 5(55) (IF-3.84). pp. 44447-44457.

Bhattacharya, Soumya and Roychowdhury, Anirban and Tiwari, V and Prasad, A B Krishna and Ningthoujam, R S and Patel, A B and Das, Dipankar and Nayar, S (2015) Effect of biomimetic templates on the magneto-structural properties of Fe3O4 nanoparticles. RSC Advances, 5(18) (IF-3.708). pp. 13777-13786.

Biswas, A and Nistala, Harsha and Sinha, Moni (2015) Effect of flux granulometry on the sintering process using thermodynamic analysis. Journal of Metallurgy and Materials Science, 57(2) . pp. 67-74.

C

Chakraborty, S K (2015) E-waste recycling. Journal of Metallurgy and Materials Science, 57(2) . pp. 107-113.

Chakravarty, S and Mohanty, Ashok and Banerjee, Amit and Tripathy, R and Mandal, G K and Basariya, M R and Sharma, Mamta (2015) Composition, mineral matter characteristics and ash fusion behavior of some Indian coals. Fuel, 150 (IF-3.406). pp. 96-101.

Chalavadi, G and Das, Avimanyu (2015) Study of the mechanism of fine coal beneficiation in air table. Fuel, 154 . pp. 207-216.

Chalavadi, G and Singh, R K and Sharma, Mamta and Das, Avimanyu (2015) Recovery of Combustibles from Fine Coal through Controlled Air Fluidization over Inclined Deck. Separation Science and Technology, 50(13) (IF-1.171). pp. 2032-2040.

Chatterjee, Partho Pratim (2015) Generation of piezoelectric potential difference from solar energy induced thermo-mechanical stress. Journal of Metallurgy and Materials Science, 57(1) . pp. 19-25.

Choubey, Pankaj K and Panda, Rekha and Jha, Manis K and Lee, Jae-chun and Pathak, D D (2015) Recovery of copper and recycling of acid from the leach liquor of discarded Printed Circuit Boards (PCBs). Separation and Purification Technology, 156 (IF-3.091). pp. 269-275.

Choudhary, B N and Roy, B N and Vaish, A K (2015) Production of foundry grade iron from sponge iron fines. Journal of Metallurgy and Materials Science, 57(4) . pp. 211-224.

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2015) Cyclic fracture behaviour of 20MnMoNi55 steel at room and elevated temperatures. Fatigue & Fracture of Engineering Materials & Structures, 38 (IF-1.561). pp. 813-827.

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2015) Incremental cyclic fracture behaviour of 20MnMoNi55 steel at room temperature. International Journal of Fracture, 192(1) (IF-1.348). pp. 117-132.

D

Das, Arpan (2015) Crystallographic variant selection of martensite at high stress/strain. Philosophical Magazine, 95(20) (IF-1.427). pp. 2210-2227.

Das, Arpan (2015) Crystallographic variant selection of martensite during fatigue deformation. Philosophical Magazine, 95(8) (IF-1.427). pp. 844-860.

Das, Arpan (2015) Dislocation configurations through austenite grain misorientations. International Journal of Fatigue, 70 (IF-2.665). pp. 473-479.

Das, Suchandan K and Mandal, D and Sahoo, K L (2015) Neural Modeling and Experimental Investigation of the Erosion Characteristics of Boiler Grade Steels Impacted by Fly Ash. Journal of Materials Engineering and Performance, 24(9) (IF-0.998). pp. 3513-3526.

Das, Tuhin and Saha, Rajib and Bera, Supriya and Dahmen, Kirsten and Ghosh, M and Haldar, A and Bleck, Wolfgang and Ghosh Chowdhury, S (2015) Effect of High Tensile Strain Rate on the Evolution of Microstructure in Fe-Mn-C-Al Twinning-Induced Plasticity (TWIP) Steel. Metallurgical and Materials Transactions A, 46A (1) (IF-1.730). pp. 6-11.

Datta, A K (2015) Optimization of Process Parameters by Reliability-Based Uncertainty Modeling of Cold Rolling Process. In: Internatioanl Seminar on 'Innovative Technologies for clean, green and Automated Steel Plants: A better Tomorrow”, 10th to 11th Sep, Taj Bengal Hotel, Kolkata, India .

Datta, A K and Sivaprasad, S and Bar, H N and Halder, N and Prasad, P (2015) Estimation of available in-elastic dissipation energy of high tensile steels against earthquake excitations. Journal of Metallurgy and Materials Science, 57(4) . pp. 197-209.

Datta, A K and Sivaprasad, S and Prasad, P (2015) Control of Earthquake Resistant High Rise Steel Frame Structures. In: International Seminar on 3rd Annual International Conference on Architecture and Civil Engineering (ACE 2015), 13-14 April 2015, Singapore.

Dey, Shobhana and B, Gangadhar and Gopalkrishna, S.J. (2015) Amenability to dry processing of high ash thermal coal using a pneumatic table. International Journal of Mining Science and Technology, 25 (IF-1.551). pp. 955-961.

Dey, Shobhana and Pani, Santosh and Singh, Ratnakar and Paul, Gyan Manjari (2015) Response of process parameters for processing of iron ore slime using column flotation. International Journal of Mineral Processing, 140 (IF-1.310). pp. 58-65.

Dhar, P and Bhattacharjee, S and Nayar, S and Das, S K (2015) Anomalously Augmented Charge Transport Capabilities of Biomimetically Transformed Collagen Intercalated Nanographene-Based Biocolloids. LANGMUIR, 31(12) (IF-4.384). pp. 3696-3706.

Director, NML (2015) Annual Report 2014-2015. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2015) Director's Desk - 67th RC Meeting of CSIR-NML (English Version). CSIR-NML, Jamshedpur.

Director, NML (2015) Fatigue and Fracture - A compilation of 100 research publications. Compilation of 100 research publications . pp. 1-948.

G

Ghosh, Anirban and Abhilash, and Pandey, B D (2015) A study on organo-sulfur tolerant bacterial strains from extremophilic coal mine environment- isolation and growth factors. Indian Journal of Geo-Marine Sciences, 44(3) (IF-0.616). (In Press)

Ghosh, Anirban and Kumari, Sujata and Abhilash, and Pandey, B D (2015) Microbial Biodesulphurisation of Coal. In: Microbiology for Minerals, Metals, Materials and the Environment. Taylor and Francis- CRC press, Philadelphia, US, pp. 153-184. ISBN 9781482257298

Ghosh, M and Santosh, R and Das, Swapan K and Das, Goutam and Mahato, B and Korody, J and Kumar, S and Singh, P K (2015) Effect of Structural Heterogeneity on In Situ Deformation of Dissimilar Weld Between Ferritic and Austenitic Steel. Metallurgical and Materials Transactions A, 46A (IF-1.730). pp. 3555-3568.

Ghosh Chowdhury, S and Minz, R K and Rajnikanth, V and Munda, Parikshit and Shah, Minal and Das, Swapan K and Sahoo, K L and Paul, K K (2015) Development of new silt erosion resistant steel for hydro turbine components. Iron & Steel Review, 59(6) .

Gopinath, K and Gupta, R K and Sahu, J K and Ray, P K and Ghosh, R N (2015) Designing P92 grade martensitic steel header pipes against creep–fatigue interaction loading condition: Damage micromechanisms. Materials & Design, 86 (IF-3.501). pp. 411-420.

Goswami, B and Ray, Ashok K and Raj, A (2015) Frontiers in materials and processing in chemical plants. Journal of Metallurgy and Materials Science, 57(2) . pp. 57-65.

Goswami, B and Ray, Ashok K and Raj, A (2015) Frontiers in materials for air frame structure. Journal of Metallurgy and Materials Science, 57(4) . pp. 187-195.

Goswami, B and Ray, Ashok K and Raj, A (2015) Frontiers in materials for fastening and joining. Journal of Metallurgy and Materials Science, 57(3) . pp. 115-126.

Goudar, D M and Srivastava, V C and Rudrakshi, G B and Raju, K and Ojha, S N (2015) Effect of Tin on the Wear Properties of Spray Formed Al–17Si Alloy. http://link.springer.com/article/10.1007%2Fs12666-015-0573-1, 68 (IF-0.615). pp. 3-7.

Gurevich, Y L and Teremova, M I and Bondarenko, G N and Kislan, S L and Abhilash, (2015) Bio-chemical leaching of kaolinite-hematite-boehmite type bauxite ore. Indian Journal of Chemical Technology, 22/5 (IF-0.655). pp. 248-252.

Guria, A and Mandal, G K and Hodgson, Peter and Beynon, John H and Ghosh Chowdhury, S (2015) Effect of Twinning on Microstructural Evolution During Dynamic Recrystallisation of Hot Deformed As-Cast Austenitic Stainless Steel. Metallurgical and Materials Transactions A, 46(10) . pp. 4423-4428.

H

Hauser, M and Wendler, M and Ghosh Chowdhury, S and Weiss, A and Mola, J (2015) Quantification of deformation induced alpha '-martensite in Fe-19Cr-3Mn-4Ni-0.15C-0.15N austenitic steel by in situ magnetic measurements. Materials Science and Technology, 31(12) (IF-1.909). pp. 1473-1478.

Hore, S and Das, Suchandan K and Banerjee, S and Mukherjee, S (2015) Computational modelling of static recrystallization and two dimensional microstructure evolution during hot strip rolling of advanced high strength steel. Journal of Manufacturing Processes, 17 (IF-1.528). pp. 78-87.

Humane, M M and Thool, K S and Minz, R K and Kestens, L A I (2015) Microstructures and Textures of Hot Rolled and Hot Rolled-Normalized 2.9 % Silicon Steel Sheets. Transactions of the Indian Institute of Metals, 68(3) (IF- 0.62). pp. 371-381.

Husain, M M and Sarkar, R and Pal, T K and Prabhu, N and Ghosh, M (2015) Friction Stir Welding of Steel: Heat Input, Microstructure, and Mechanical Property Co-relation. Journal of Materials Engineering and Performance, 24 (IF-0.998). pp. 3673-3683.

J

Jain, Ishant and Singh, R K and Mazumdar, D (2015) Measurements of Some Thermal Properties of Steel-Refractory Systems and Heat Losses from Steelmaking Furnaces. Transactions of the Indian Institute of Metals, 68(3) (IF-0.62). pp. 383-392.

K

Kalpana, Y and Sushanta, Roy and Alka, (2015) Evaluation of silanes as corrosion resistant coatings for Cu-alloy in Sea water. Journal of Metallurgy and Materials Science, 57(1) . pp. 27-32.

Khan, S S and Rao, T R (2015) Multi objective optimization of turning parameters for Al 6061 using genetic algorithm. Journal of Metallurgy and Materials Science, 57(4) . pp. 243-249.

Krishna, M V B and Chandrasekaran, K and Chakravarty, S and Karunasagar, D (2015) An integrated approach based on oxidative pyrolysis and microwave-assisted digestion for the multi-elemental analysis of coal samples by ICP-based techniques. Fuel, 158 (IF-3.520). pp. 770-778.

Kulhara, Neelkamal (2015) Estimation of mositure in coke using non-invasive infrared thermography. Masters thesis, NIT Trichy.

Kumar, A and Tripathi, B and Mishra, S and Kumar, P and Sharma, I H (2015) Power consumption and design optimization of a sustainable H fuel cell powered vehicle. Journal of Metallurgy and Materials Science, 57(3) . pp. 157-165.

Kumar, Ashish and Kumar, Santosh and Kumar, Rajneesh (2015) Some studies on Heat-Affected Zone (HAZ)Toughness behavior of API 5L X52 steel. Indian welding Journal, 48(2) . pp. 68-75.

Kumar, P and Roy, A (2015) Creep damage and remaining life assessment of service exposed engineering materials used in petrochemical industry. Journal of Metallurgy and Materials Science, 57(1) . pp. 41-56.

Kumar, Rakesh and Alex, T C (2015) Elucidation of the Nature of Structural Heterogeneity During Alkali Leaching of Non-activated and Mechanically Activated Boehmite (gamma-AlOOH). Metallurgical and Materials Transactions B- Process Metallurgy and Materials Processing Science, 46(4) . pp. 1684-1701.

Kumar, Sanjay and Kristaly, Ferenc and Mucsi, Gabor (2015) Geopolymerisation behaviour of size fractioned fly ash. Advanced Powder Technology, 26(1) (IF-1.300). pp. 24-30.

Kumar, Vinod and Lee, Jae-chun and Jeong, Jinki and Jha, Manis K and Kim, Byung-Su and Singh, Ratnakar (2015) Recycling of printed circuit boards (PCBs) to generate enriched rare metal concentrate. Journal of Industrial and Engineering Chemistry, 21 (IF-2.145). pp. 805-813.

Kumari, Amrita and Das, Suchandan K and Srivastava, P K (2015) Estimation of Scale Deposition in the Water Walls of an Operating Indian Coal Fired Boiler: Predictive Modeling Approach Using Artificial Neural Networks. Journal of The Institution of Engineers (India) . pp. 2250-2122.

Kumari, Archana and Panda, Rekha and Jha, Manis K and Kumar, J Rajesh and Lee, Jin Young (2015) Process development to recover rare earth metals from monazite mineral: A review. Minerals Engineering, 79 (IF-1.714). pp. 102-115.

Kumari, Archana and Panda, Rekha and Jha, Manis K and Lee, Jin-Young and Kumar, J Rajesh and Kumar, Vinay (2015) Thermal treatment for the separation of phosphate and recovery of rare earth metals (REMs) from Korean monazite. Journal of Industrial and Engineering Chemistry, 21 (IF-2.145). pp. 696-703.

Kumari, Beena and Sahney, Sangeeta and Madhukar, Anuradha and Chattoraj , Indranil and Sinni, Shipra (2015) Involvement and productivity of research and development workers: A case study of a publicly-funded research laboratory. International Journal of Productivity and Performance Management (previously Work Study), 64/4 . pp. 567-589.

Kundu, Sudip and Sadhukhan, P (2015) Design and implementation of a time synchronization-free distributed localization scheme for underwater acoustic sensor network. Applications and Innovations in Mobile Computing (AIMoC), 2015 . pp. 74-80.

L

Lee, Sang-hun and Yoo, Kyoungkeun and Jha, Manis K and Lee, Jae-chun (2015) Separation of Sn from waste Pb-free Sn–Ag–Cu solder in hydrochloric acid solution with ferric chloride. Hydrometallurgy, 157 (IF-1.933). pp. 184-187.

M

Mahato, B and Shee, S K and Sahu, T and Ghosh Chowdhury, S and Sahu, Puspendu and Porter, D A and Karjalainen, L P (2015) An effective stacking fault energy viewpoint on the formation of extended defects and their contribution to strain hardening in a Fe-Mn-Si-Al twinning-induced plasticity steel. Acta Materialia, 68 (IF-2.380). pp. 69-79.

Mallick, Ashish Kumar and Vasumathi, N and Ananda Rao, M and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S (2015) Washability and flotation charactersitics of two different coals reporting as feed to an operating coal washery. In: 31st National Convention of Chemical Engineers & National Seminar on “TECHNOLOGICAL ADVANCEMENT IN CHEMICAL ENGINEERING AND MINERAL PROCESSING”, September 12-13, 2015, Institute of Engineers, Bhubaneswar, Odisha.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2015) Hydrometallurgical processing of spent lithium ion batteries (LIBs) in the presence of a reducing agent with emphasis on kinetics of leaching. Chemical Engineering Journal, 281 (IF-4.321). pp. 418-427.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2015) Leaching of base metals from spent Ni–metal hydride batteries with emphasis on kinetics and characterization. Hydrometallurgy, 158 (1.933). pp. 172-179.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2015) Recovery of valuable metals from cathodic active material of spent lithium ion batteries: Leaching and kinetic aspects. Waste Management, 45 (IF-3.220). pp. 306-313.

Meshram, Pratima and Purohit, Bijoy Kumar and Sinha, Manish K and Sahu, S K and Pandey, B D (2015) Demineralization of low grade coal – A review. Renewable and Sustainable Energy Reviews, 41 (IF-5.510). pp. 745-761.

Metya, Avijit Kr and Ghosh, M and Parida, N and Balasubramaniam, Krishnan (2015) Effect of tempering temperatures on nonlinear Lamb wave signal of modified 9Cr–1Mo steel. Materials Characterization, 107 . pp. 14-22.

Mishra, Suman K and Kumar, Rakesh and Soni, and Sreemany, M and Pathak, L C (2015) Ultrathin to Nano Thickness TiN Coatings: Processing, Structural, Mechanical Behavior. Journal of Materials Engineering and Performance, 24(12) (IF-). pp. 5013-5021.

Misra, S B and Kamble, A and Yadav, S and Ranganathan, S (2015) Influence of charge segregation on specific aluminium consumption in production of ferro-titanium. Canadian Metallurgical Quarterly, 54(1) (IF-0.495). pp. 101-109.

Moon, Gyeonghye and Park, Hongki and Yoo, Kyoungkeun and Jha, Manis K and Alorro, Richad Diaz and Kim, Ju Yup (2015) The Determination of Chemical Forms of Heavy Metals in Shooting Area Contaminated Soil Using Sequential Extraction Method. Journal of Soil and Groundwater Environment, 20(6) . pp. 111-116.

Mucsi, Gabor and Kumar, Sanjay and Csoke, Barnabás and Kumar, Rakesh and Molnár, Zoltán and Rácz, Ádám and Mádai , Ferenc and Debreczeni , Ákos (2015) Control of geopolymer properties by grinding of land filled fly ash. International Journal of Mineral Processing, 143 (IF-1.31). pp. 50-58.

Mukhopadhyay, C.K and Haneef, T.K and Metya, Avijit Kr and Murthy, G V S (2015) Acoustic emission monitoring during hydrotesting of a mounded LPG storage vessel of petrochemical industry. Strength, Fracture and Complexity, 9(4) (IF-0.76). pp. 251-264.

Mukhopadhyay, N K and Uhlenwinkel, V and Srivastava, V C (2015) Synthesis and Characterization of Bulk Al-Cu-Fe Based Quasicrystals and Composites by Spray Forming. Journal of materials engineering and performance, 24(6) (IF-0.98). pp. 2172-2178.

N

Nath, S K and Maitra, S and Mukherjee, S and Kumar, Sanjay (2015) Microstructural evolution of fly ash geopolymer: effect of alkali concentration. In: 78th Annual Session of Indian Ceramic Society, 2-3rd February, 2015, Jamshedpur.

Nayak, B and Meyer, Franz Michael (2015) Tetrataenite in Terrestrial Rock. American Mineralogist, 100(1) (IF-2.059). pp. 209-214.

Nguyen, Viet Tu and Lee, Jae-chun and Jeong, Jinki and Kim, Byung-Su and Pandey, B D (2015) The Separation and Recovery of Nickel and Lithium from the Sulfate Leach Liquor of Spent Lithium Ion Batteries using PC-88A. Korean Chemical Engineering Research, 53(2) (IF-1.166). pp. 137-144.

Nistala, Harsha and Biswas, A and Sinha, Moni (2015) Heating index : estimation through numerical modeling of the sintering process and its relationship with sinter quality. Journal of Metallurgy and Materials Science, 57(2) . pp. 93-105.

O

Ogundiran, M B and Kumar, Sanjay (2015) Synthesis and characterisation of geopolymer from Nigerian Clay. Applied Clay Science, 108 (IF-2.703). pp. 173-181.

P

Pal, J and Ghorai, S and Agarwal, Sanjay and Nandi, B and Chakraborty, T and Das, Goutam and Prakash, S (2015) Effect of Blaine Fineness on the Quality of Hematite Iron Ore Pellets for Blast Furnace. Mineral Processing and Extractive Metallurgy Review, 36 (2) (IF-0.690). pp. 83-91.

Pal, J and Ghorai, S and Bandyopadhyay, D and Ghosh, Sukomal (2015) Performance Assessment of Partially Pre-fused Synthetic Flux in Basic Oxygen Steel Making. Journal of Iron and Steel Research, International, 22 (IF-0.675). pp. 916-923.

Pal, J and Ghorai, S and Das, Avimanyu (2015) Development of carbon composite iron ore micropellets by using the microfines of iron ore and carbon-bearing materials in iron making. International Journal of Minerals, Metallurgy and Materials, 22 (IF-0.69). pp. 132-140.

Pal, J and Ghorai, S and Nandi, B and Chakaborty, T and Das, Goutam and Venugopalan, T (2015) Effect of pyroxenite and olivine minerals as source of MgO in hematite pellet on improvement of metallurgical properties. Journal of Central South University, 22(9) . pp. 3302-3310.

Pal, J and Venugopalan, T (2015) Carbon as in situ energy source in induration of hematite pellets and its effect on pellet properties. Ironmaking and Steelmaking, 42 (IF-0.553). pp. 139-147.

PAL, Jagannath and GHORAI, Satadal and BANDYOPADHYAY, Debajyoti and GHOSH, Sukomal (2015) Performance Assessment of Partially Pre-fused Synthetic Flux in Basic Oxygen Steel Making. JOURNAL OF IRON AND STEEL RESEARCH, INTERNATIONAL, 22(10) (2.1). pp. 916-923.

PAL, Jagannath and GHORAI, Satadal and BANDYOPADHYAY, Debajyoti and GHOSH, Sukomal (2015) Performance Assessment of Partially Pre-fused Synthetic Flux in Basic Oxygen Steel Making. JOURNAL OF IRON AND STEEL RESEARCH, INTERNATIONAL. , 22(10): 916-923 (2.1). pp. 916-923.

Panda, A K and Dey, Sushmita and Roy, Rajat K and Singh, Satnam and Mitra, A (2015) Influence of phase transformation on interfacial activity and bend sensitivity of rapidly quenched Fe77.5Si7.5B15/Co72.5Si12.5B15 bilayered magnetostrictive ribbons. Journal of Magnetism and Magnetic Materials, 378 (IF-1.568). pp. 440-446.

Pandey, R S (2015) Mathematical modeling of iron ore pelletization in a straight-grate induration process. Journal of Metallurgy and Materials Science, 57(3) . pp. 179-186.

Paswan, Dayanand and Malathi, M and Minj, R K and Bandopadhyay, D (2015) Mill Scale: A Potential Raw Material for Iron and Steel Making. Steelworld , 21 . pp. 54-56.

Pattanayak, S and Dey, Swati and Chatterjee, S and Ghosh Chowdhury, S and Datta, S (2015) Computational intelligence based designing of microalloyed pipeline steel. Computational Materials Science, 104 (IF-1.879). pp. 60-68.

Prakash, Amit (2015) The effect of Residual Stress on Fatigue crack growth rate in AISI 304LN Stainless steel. Masters thesis, Indian Institute of Technology (BHU), Varanasi.

Prakash, Amit and Lal, Radha Krishna and Choubey, Vikas Kumar and Dwivedi, J P and Singh, V P (2015) Study of Residual Stresses in I sectioned bars of Linear Work-Hardening Materials under Torsion. 2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI 2015) . pp. 299-310.

Pramanick, A K and Kumar, Rahul (2015) Graphene coated on Ni plated steels. Training Report (TR). http://eprints.nmlindia.org, CSIR-NML. (Unpublished)

Prasad, A K and Pathak, D D and Pan, S K (2015) Characterisation of low grade iron ores of Bursua iron ore mines. Journal of Metallurgy and Materials Science, 57(1) . pp. 1-7.

Prashanth, K G and Shahabi, H S and Attar, H and Srivastava, V C and Eckert, J and Scudino, S and Uhlenwinkel, V and Ellendt, N (2015) Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting. Additive Manufacturing, 6 . pp. 1-5.

R

Randhawa, N S and Dwivedi, D and Prajapati, S and Jana, R K (2015) Application of manganese nodules leaching residue for adsorption of nickel(II) ions from aqueous solution. International Journal of Environmental Science and Technology, 12(3) (IF-1.794). pp. 857-864.

Rao, M Ananda and Kumar, M V Pavan (2015) An Investigation of a Dryer Can Failure in a Paper Mill. Journal of Failure Analysis and Prevention, 15(2) (computing). pp. 251-257.

Ravi Kumar, B and Sharma, S and Kashyap, B P and Prabhu, N S (2015) Ultrafine grained microstructure tailoring in austenitic stainless steel for enhanced plasticity. Materials & Design, 68 (IF-3.171). pp. 63-71.

Ray, Ajoy K and Chatterjee, S and Singh, J K and Bapari, H (2015) Thermal Exfoliation of Natural Cellulosic Material for Graphene Synthesis. Journal of Materials Engineering and Performance, 24(1) (IF-0.981). pp. 80-84.

Roy, Nilima and Das, Avimanyu and Ray, Ashok K (2015) Simulation and quantification of creep damage. International Journal of Damage Mechanics (IF-1.495).

Roy, Nilima and Raj, A and Roy, B N and Ray, Ashok K (2015) Creep deformation and damage evaluation of service exposed reformer tube. Canadian metallurgical quarterly, 54(2) (IF-0.5). pp. 205-222.

S

Sahu, A K and Goswami, N G (2015) Institutional Repository: Prospect and its global impact. VSRD International Journal of Technical & Non-Technical Research, Vol. VI Special Issue May 2015, 6 (UIF-0.7145 & SJIF-2.608). pp. 143-148.

Sahu, J K and Ravi Kumar, B and Das, S K and Paulose, N and Mannan, S L (2015) Isothermal high temperature low cycle fatigue behavior of Nimonic-263: Influence of type I and type II hot corrosion. Materials Science and Engineering A, 622 (IF-2.409). pp. 131-138.

Sathe, P and Sarkar, B and Das, Avimanyu (2015) Residence time distribution of solid particles in liquid fluidised bed separator. Canadian Metallurgical Quarterly, 54(1) (IF-0.495). pp. 110-122.

Sau, D C and Banerjee, A and Kumar, Manoj and Kumar, Rakesh (2015) Experimental investigation for conversion of hematite to magnetite with high ash Jhama Coal. Journal of Metallurgy and Materials Science, 57(2) . pp. 83-91.

Seth, P P and Das, Arpan and Bar, H N and Sivaprasad, S and Basu, A and Dutta, K (2015) Evolution of Dislocation Density During Tensile Deformation of BH220 Steel at Different Pre-strain Conditions. Journal of Materials Engineering and Performance, 24(7) (IF-0.998). pp. 2779-2783.

Sethi, Ankit S and Mahobia, G S and sinha, O P (2015) Reduction behavior of iron ore pellets with addition of plastics along with conventional reducing agents. Journal of Metallurgy and Materials Science, 57(3) . pp. 167-171.

Sharma, S and Khan, Md Soaib and Ranjan, Rajeev and Choudhary, R N P (2015) Energy material Sm3+-modified lead zirconate titanate (PZT) ceramics : preparation, characterisation and application. Journal of Metallurgy and Materials Science, 57(3) . pp. 151-155.

Sheikh, Lubna and Dutta, Abinash and Chandra, R and Nayar, S (2015) Effect of Ferrofluids on Microbes. International Journal of New Technologies in Science and Engineering, 2(3) . pp. 109-117.

Sheikh, Lubna and Mahto, Neha and Nayar, S (2015) In situ synthesis of hydroxyapatite nanocomposites using iron oxide nanofluids at ambient conditions. Journal of Materials Science: Materials in Medicine, 26(1) (IF-2.379). p. 5393.

Sheikh, Lubna and Vohra, R and Verma, A K and Nayar, S (2015) Biomimetically Synthesized Aqueous Ferrofluids Having Antibacterial and Anticancer Properties. Materials Sciences and Applications, 6 . pp. 242-250.

Shyamal, S and Hajra, P and Mandal, H and Singh, J K and Satpati, A K and Pande, S and Bhattacharya, C (2015) Effect of Substrates on the Photoelectrochemical Reduction of Water over Cathodically Electrodeposited p-Type Cu2O Thin Films. ACS Applied Materials and Interfaces, 7(33) (IF-6.723). pp. 18344-18352.

Singh, C B and Gupta, R N and Vaish, A K and Goswami, M C (2015) Reduction kinetics of low grade iron ore - revealing the efficacy of ancient iron making process. Journal of Metallurgy and Materials Science, 57(3) . pp. 127-134.

Singh, Rajesh Kumar (2015) Corrosion and corrosion protection of mild steel in SO environment. Journal of Metallurgy and Materials Science, 57(1) . pp. 33-40.

Singhbabu, Y N and Choudhary, Shyam K and Shukla, N and Das, S and Sahu, Ranjan K (2015) Observation of large positive magneto-resistance in bubble decorated graphene oxide films derived from shellac biopolymer: a new carbon source and facile method for morphology-controlled properties†. Nanoscale, 7 (IF-6.739). pp. 6510-6519.

Singhbabu, Y N and Sivakumar, B and Singh, J K and Bapari, H and Pramanick, A K and Sahu, Ranjan K (2015) Efficient anti-corrosive coating of cold-rolled steel in a seawater environment using an oil-based graphene oxide ink†. Nanoscale, 7 (6.739). pp. 8035-8047.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and prasad, L B and Pandey, B D (2015) Low temperature hydrothermal synthesis and characterization of iron oxide powders of diverse morphologies from spent pickle liquor. Powder Technology, 276 (IF-2.269). pp. 214-221.

Sinha, Moni and Nistala, Harsha (2015) Microstructural analysis of sinter breakage. Journal of Metallurgy and Materials Science, 57(2) . pp. 75-82.

Sinha, Moni and Nistala, Harsha and Biswas, A (2015) Effect of inert gas injection on sinter RDI. Journal of Metallurgy and Materials Science, 57(3) . pp. 173-178.

Siva, S B V and Ganguly, R I and Rao, G S and Sahoo, K L (2015) Quantitative studies on wear behavior of Al-(Al2O3-SiC-C) composite prepared with in situ ceramic composite developed from colliery waste. Proceeding of the institution Mechanical EngineersPart J-Jornal of Engineering Tribology, 229(7) (IF-0.916). pp. 823-834.

Sivakumar, B and Singh, Raghuvir and Pathak, L C (2015) Corrosion behavior of titanium boride composite coating fabricated on commercially pure titanium in Ringer's solution for bioimplant applications. Materials Science & Engineering C-Materials for Biological Applications, 48 (IF-2.736). pp. 243-255.

Srikanth, S (2015) CSIR-NML Equipment Facility Handbook. CSIR-National Metallurgical Laboratory, Jamshedpur.

Srikanth, S (2015) CSIR-NML Technology Handbook. CSIR-National Metallurgical Laboratory, Jamshedpur.

Srikanth, S (2015) Some recent technological achievements of CSIR-National Metallurgical Laboratory. Current Science, 108(11) . pp. 2014-2016.

Srikanth, S and laxmi, V Devi and Kumar, Rakesh (2015) Unfolding the complexities of mechanical activation assisted alkali leaching of zircon (ZrSiO4). Hydrometallurgy, Available online 10 December 2015 . (In Press)

Srivastava, V C (2015) Conference proceedings: Thermo-mechanical processing of Steels & 5th Gleeble User Workshop India. In: National Conference on Thermo-mechanical processing of Steels & 5th Gleeble User Workshop India (GUWI-2015), August 6-7, 2015, CSIR-NML Jamshedpur.

Suresh, S and Viswanathan, N N (2015) Hydrogen reduction of single pellet nickel oxide under microwave irradiation. Journal of Metallurgy and Materials Science, 57(4) . pp. 257-264.

Swain, Basudev and Mishra, Chinmayee and Jeong, Jinki and Lee, Jae-chun and Hong, Hyun Seon and Pandey, B D (2015) Separation of Co(II) and Li(I) with Cyanex 272 using hollow fiber supported liquid membrane: A comparison with flat sheet supported liquid membrane and dispersive solvent extraction process. Chemical Engineering Journal, 271 (IF-4.058). pp. 61-70.

T

Thangaraj, B and Sankara Narayanan, T S N and Kulandaivelu, R and Lee, Min Ho (2015) A Facile Method to Modify the Characteristics and Corrosion Behavior of 304 Stainless Steel by Surface Nanostructuring toward Biomedical Applications. ACS Appl Mater Interfaces, 7(32) (IF-6.723). pp. 17731-17747.

V

Vaish, A K and Bhatnagar, S K (2015) Steel making in LD converter for the production of billets - A typical case study. Journal of Metallurgy and Materials Science, 57(4) . pp. 225-235.

Vasumathi, N and Vijaya Kumar, T V and Ratchambhigai, S and Subba Rao, S and Bhaskar Raju, G (2015) Flotation studies on low grade graphite ore from Eastern India. International Journal of Mining Science and Technology, 25(3) . pp. 415-420.

Vasumathi, N and Vijaya Kumar, T V and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G and Prasad, Kopparthi (2015) Pilot scale column flotation studies on the beneficiation of coal fines. In: International seminar on Mineral Processing Technology, (MPT 2014) in Andhra University, 12-14 March 2015, Andhra University, Vishakapatnam, Andhra Pradesh..

Verma, Amit (2015) Central quality assessment of continuously cast high carbon billets using ultrasonic c-scan imaging. Masters thesis, NIT Trichy.

Vijayasarathi, P and Prabhu, S P and Rajaram, Gukan (2015) Abrasive wear behavior of Ti-Al-N hard-faced coatings evaluated with ball-cratering test method. Journal of Metallurgy and Materials Science, Vol. 57, No. 1, January-March 2015, pp. 9-18, 57(1) . pp. 9-18.

Vijayasarthi, P and Kavitha, C (2015) An investigation of design and thermal analysis of the different material on disc brake with frictional heat generation. Journal of Metallurgy and Materials Science, 57(4) . pp. 237-242.

Y

Yoon, Ho-Sung and Kim, Chul-Joo and Chung, Kyung Woo and Jeon, Sanghee and Park, Ilhwan and Yoo, Kyoungkeun and Jha, Manis K (2015) The Effect of Grinding and Roasting Conditions on the Selective Leaching of Nd and Dy from NdFeB Magnet Scraps. Metals, 5(3) (IF-0.883). pp. 1306-1314.