Items where Year is 1996

Annual Reports

Director, NML (1996) Annual Report 1995-1996. NML, Jamshedpur.

Article

Bahadur, Aruna (1996) Aluminum coatings for steel. Materials and Manufacturing Processes, 11 (2). pp. 225-232.

Bahadur, Aruna (1996) Low chromate corrosion inhibitor with borate and hexametaphosphate. Materials Transactions JIM, 37 (4). pp. 605-611.

Bandopadhyay, A and Ganguly, Amit and Gupta, K N (1996) Investigations on the anomalous oxidation behaviour of high-carbon gas-based direct reduced iron (DRI). Thermochimica Acta, 276 . pp. 199-207.

Bandopadhyay, A and Majumdar, S K and Ghoshal, T K and Singh, K K and Ramachandrarao, P (1996) Investigations on the nature of pollution created by secondary re-rolling mills. NML Technical Journal, 38 (1). pp. 25-30.

Bandyopadhyay, D and Ghosh, Arindam (1996) Validity of rate equation based on Langmuir-Hinshelwood mechanism for gasification of carbon - A reappraisal. Steel Research, 67 (3). pp. 79-86.

Basak, A C and Ghosh, K C and Sircar, J K and Paul, A R and Pandey, L P and Bhattacharjee, S (1996) A Sensitive Method for the Determination of Silicon by Molecular Absorption Spectroscopy. Microchemical Journal, 54 (1). pp. 48-53.

Bhagat, R P (1996) Adsorption of H+/OH- and Sulfonate Ions on Hematite. Metals Materials and Processes, 1996, 8 (4). pp. 323-328.

Bhagat, R P (1996) Settling test and size determination - Loading effect in settling of unflocculated particles and their size distribution. Scandinavian journal of metallurgy, 25 (2). pp. 48-50.

Bhagat, R P (1996) Thermodynamics of Polymeric Flocculant adsorption on Hematite and other Mineral Surfaces. Steel India, 19 (1). pp. 11-17.

Bhagat, R P and Pathak, P N (1996) The effect of polymeric dispersant on magnetic separation of tungsten ore slimes. International Journal of Mineral Processing, 47 (3-4). pp. 213-217.

Bhattamishra, A K and Lal, Kishori and Sivaramakrishnan, C S (1996) Effect of Si/Mg ratio on the corrosion behaviour of Al-Mg-Si alloys for automotive applications. NML Technical Journal, 38 (3). pp. 101-106.

Bodas, M G (1996) Hydrometallurgical treatment of zinc silicate ore from Thailand. Hydrometallurgy, 40 (1-2). pp. 37-49.

Bodas, M G and Dash, D R and Sivaramakrishnan, C S (1996) Oxidation of iron powder in a fluidized bed reactor. Materials & Design, 17 (3). pp. 167-172.

Chakraborty, S P and Ghosh, S and Sivaramakrishnan, C S (1996) Advance in automotive castings. NML Technical Journal, 38 (3). pp. 113-115.

Chattopadhyay, A and Banerjee, B and Maulik, S C (1996) Mineralogical evaluation of Zinc-lead ore from Ganesh Himal region of central Nepal. NML Technical Journal, 38 (4). pp. 169-173.

Chattopadhyay, Lalitha (1996) Size effect on crack-tip creep. Engineering Fracture Mechanics, 53 (2). pp. 309-310.

Chattopadhyay, Lalitha (1996) Size effect on creep energy dissipation during stable crack growth. Engineering Fracture Mechanics, 54 (6). pp. 897-899.

Chattopadhyay, Lalitha and Ghosh, R N (1996) Clip: Computer software for creep life prediction of engineering materials. Engineering Fracture Mechanics, 54 (1). pp. 71-73.

Chattopadhyay, S and Chattopadhyay, Lalitha and Banerjee, S (1996) The K-calibration and standardization of ceramic specimen. Engineering Fracture Mechanics, 54 (1). pp. 167-169.

Chattoraj, I and Bhattamishra, A K and Jana, S and Das, S K and Chakraborty, S P and De, P K (1996) The association of potentiokinetic reactivation and electrochemical pitting tests on a nitrogen bearing 19 Cr-17 Mn steel with its thermal history. Corrosion Science, 38 (6). pp. 957-969.

Chaudhuri, S P (1996) Automotive emission and control. NML Technical Journal, 38 (2). pp. 77-80.

Das, Suchandan K (1996) Numerical modelling of the free boundary problem in levitation melting under continuous casting conditions. Scandinavian Journal of Metallurgy, 25 (5). pp. 187-192.

Das, Suchandan K and Sarkar , A (1996) Computational modelling of thermal transport phenomena in continuous casting process based on non-orthogonal control volume approach. Communications in Numerical Methods in Engineering, 12 (10). pp. 657-671.

Das, Swapan K and Mitra, A and Daspoddar, P K (1996) Thermal analysis of hydrated calcium aluminates. Journal of Thermal Analysis, 47 (3). pp. 765-774.

Dev, S C and Sivaramakrishnan, C S (1996) An indigenous technology for a silver brazing alloy. Materials & Design, 17 (2). pp. 75-78.

Dubey, K S and Ramachandrarao, P and Lee, S (1996) Thermodynamic and viscous behaviour of undercooled liquids. Thermochimica Acta, 280-281 . pp. 25-62.

Gaur, B and Singh, T B and Singh, D D N (1996) Beneficial role of chloride ions during pickling of steel in sulfuric acid. Corrosion, 52 (2). pp. 154-159.

Ghose, B N and Bhattacharya, J and De, P K (1996) Enhancement of quality of steel sheet through process optimisation. NML Technical Journal, 38 (2). pp. 51-62.

Ghosh, B N and Lal, Kishori and De, P K and Sivaramakrishnan, C S and Ramachandrarao, P (1996) Development of ferritic stainless steel for catalytic converter. NML Technical Journal, 38 (3). pp. 117-121.

Ghosh, S and Prodhan, A and Mohanty, O N and Chakrabarti, A K (1996) A study on the oxidation characteristics of cast irons containing aluminum. Oxidation of Metals, 45 (1-2). pp. 109-131.

Jana, R K and Singh, D D N and Roy, S K (1996) Direct electrowinning of valuable metals from sea nodules using aqueous chloride bath. Transactions of the indian institute of metals, 49 (6). pp. 761-767.

Kumar, Vinay and Bagchi, D and Pandey, B D and Jana, R K and Premchand, (1996) Role of impurities in solvent extraction-electrowinning of copper and nickel for the processing of sea nodules. Transactions of the Indian Institute of Metals, 49 (6). pp. 753-760.

Mahapatra, A K S and Goswami, M C and Prakash, S and Singh, K K (1996) Quality of coke for high PCR blast furnace process-Some images. NML Technical Journal, 38 (4). pp. 161-167.

Mishra, K K and Pavelic, V and Baker, G S (1996) Strip welding of aluminum bronze. Journal of materials processing & manufacturing science, 4 (3). pp. 243-267.

Mitra, A and Rao, Venkatesh (1996) Magnetics in automobiles. NML Technical Journal, 38 (3). pp. 81-94.

Mitra, A and Ravi Kumar, B and Mukhopadhyay, N K and Murthy, G V S and Das, Swapan K and Bhattacharya, D K (1996) Residual stress evaluation in service exposed shot peened spring by micromagnetic and XRD techniques. Trends in nde science and technology - proceedings of the 14th world conference on ndt (14th wcndt),, 1-5 ( ). pp. 879-882.

Mitra, A and Sipahi, L B and Govindaraju, M R and Jiles, D C and Ramanan, V R V (1996) Effects of tensile stress on magnetic Barkhausen emissions in amorphous Fe-Si-B alloy. Journal of Magnetism and Magnetic Materials, 153 (1-2). pp. 231-234.

Mukhopadhyay, N K and Chattopadhyay, K and Ranganathan, S (1996) Ordering transformation in icosahedral quasicrystals and related crystalline phases. Bulletin of Materials Science, 19 (5). pp. 717-723.

Murthy, D S R and Prasad, P M (1996) Leaching of gold and silver from Miller Process dross through non-cyanide leachants. Hydrometallurgy, 42 (1). pp. 27-33.

Pandey, B D and Cote, G and Bauer, D (1996) Extraction of chromium (III) from spent tanning baths. Hydrometallurgy, 40 (3). pp. 343-357.

Pandey, B D and Cote, G and Bauer, D (1996) Extraction of chromium(III) from spent tanning baths. Hydrometallurgy, 40 (3). pp. 343-357.

Pandey, J L and Narang, S K and Agrawal, A (1996) Processing of defective nickel-plated parts with non-cyanide chemical strippers. NML Technical Journal, 38 (1). pp. 31-35.

Parida, N and Ravi Kumar, B and Das, Goutam and Murthy, S G N and Bhattacharya, D K (1996) Monitoring the hydrotesting of a new pressure vessel by means of acoustic emission. Trends in nde science and technology - proceedings of the 14th world conference on ndt (14th wcndt),, 1-5 ( ). pp. 2423-2426.

Prakash, S (1996) Reduction and sintering of fluxed iron ore pellets - A comprehensive review. Journal of the south african institute of mining and metallurgy, 96 (1). pp. 3-16.

Prasad, Sanjay and Pandey, B D and Palit, S K (1996) Kinetics of sulfation of chalcopyrite with steam and oxygen in the presence of ferric oxide. Metallurgical and Materials Transactions B-Process metallurgy and materials processing science, 27 (3). pp. 465-474.

Prasad, Sanjay and Pandey, B D and Palit, S K (1996) Sulphation of chalcopyrite with steam and oxygen in the presence of some additives. Materials Transactions JIM, 37 (6). pp. 1304-1310.

Premchand, (1996) Processing of low grade tungsten ore concentrates by hydrometallurgical route with particular reference to India. Bulletin of Materials Science, 19 (2). pp. 295-312.

Puvvada, G V K and Chandrasekhar, K and Ramachandrarao, P (1996) Solvent extraction of gallium from an Indian Bayer process liquor using Kelex-100. Minerals Engineering, 9 (10). pp. 213-1058.

Ram, S and Halder, S (1996) Medium-range structural ordering and macroscopic interactions in 1 to 2 mm thin two-dimensional platelets of borate glasses. Physica status solidi b-basic research, 195 (2). pp. 343-351.

Ranganathan, S (1996) The technique of successive partial equilibria to predict precipitation of carbides in equilibrium with a solution phase. Calphad, 20 (4). pp. 461-470.

Rao, Ch. Sridhar (1996) Titanium as an Automotive Material. NML Technical Journal, 38 (2). pp. 43-50.

Rao, V Venkateswara (1996) Rapid solidification processing of some aluminium alloys. NML Technical Journal, 38 (4). pp. 133-150.

Ray, Ajoy K and Bhattacharya, D K and Das, Goutam (1996) Acoustic emission studies during indentation on ceramic and ceramic composite. Trends in nde science and technology - proceedings of the 14th world conference on ndt (14th wcndt),, 1-5 ( ). pp. 2455-2458.

Ray, Ashok K and Fuller, E R and Banerjee, S (1996) Fatigue crack growth rate and fracture toughness of 25 wt% silicon carbide whisker reinforced alumina composite with residual porosity. Journal of the European Ceramic Society, 16 (5). pp. 503-513.

Saha, A K (1996) Studies on thermal beneficiation of low grade rock phosphate. NML Technical Journal, 38 (1). pp. 37-41.

Sahu, S K and Mishra, Amaresh and Behera, R K (1996) Synthesis of thiazole, benzothiazole, oxadiazole, thiadiazole, triazole and thiazolidinone incorporated coumarins. Indian Journal of Heterocyclic Chemistry . pp. 91-94.

Satyanarayana, N V and Mall, R and Pal, A (1996) A layered architecture for real-time systems. Microprocessors and Microsystems, 20 (4). pp. 241-250.

Sharma, S C and Girish, B M and Kulkarni, R S and Kamath, R (1996) Drillability of zinc/graphite metal matrix composites. NML Technical Journal, 38 (3). pp. 127-131.

Sharma, S C and Girish, B M and Kulkarni, R S and Kamath, R (1996) Machinability of zinc alloy based particulate metal matrix composites. NML Technical Journal, 38 (3). pp. 107-111.

Sharma, S C and Girish, B M and Ramachandrarao, P (1996) Tribological properties of zinc alloy based composites for bearing applications. NML Technical Journal, 38 (2). pp. 73-76.

Sharma, S C and Venkatesh, J and Girish, B M (1996) Mechanical properties of lead alloy based composite materials for battery applications. NML Technical Journal, 38 (3). pp. 95-100.

Singh, D D N (1996) Inhibition mechanism, testing and industrial applications of corrosion inhibitors. NML Technical Journal, 38 (1). pp. 1-23.

Singh, D D N and Dey, A K and Singh, B K (1996) Evaluation of corrosion resistance of galvanised coatings produced on steel surface through different routes. NML Technical Journal, 38 (4). pp. 151-160.

Singh, Ratnakar and Singh, P (1996) Beneficiation of Non-coking Coal for Injection in Blast Furnace. In COAL-96 . pp. 1-12.

Sircar, J K and Bhattacharjee, S and Konar, J and Ghosh, K C and Basak, A C and Jha, S N and Pandey, L P (1996) Determination of Low Amount of Chromium in Alloy Steel by an Amplification Method. Microchemical Journal, 54 (2). pp. 163-167.

Sivaramakrishnan, C S and Mohanty, R K and Lal, Kishori (1996) Zinc-aluminium alloys for automobile applications. NML Technical Journal, 38 (3). pp. 123-126.

Srikanth, S and Sanyal, D and Ramachandrarao, P (1996) A re-evaluation of the Al---Ge system. Calphad, 20 (3). pp. 321-332.

Tarafder, S and Tarafder, Mita and Ranganath, V R (1996) Fracture mechanics expressions for the standard chord-supported arc bend specimen. Journal of Testing and Evaluation, 24 (2). pp. 73-79.

Venkateswarlu, K (1996) Influence of the size and morphology of silicon particles on the physical, mechanical and tribological properties of some aluminium - silicon alloys. Material Science letters, 15 . pp. 1773-1776.

Verma, A K and Sharma, S and Ghosh, K S (1996) Ceramics for Automobile Industries. NML Technical Journal, 38 (2). pp. 63-72.

Book or NML Publication

Bandopadhyay, A and Mishra, K K and Ramachandrarao, P (1996) Critical Issues in Controlling Suspended Particulate Matters (SPM) from Cupola Exit Gases. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 99-106.

Ray, A C (1996) An integrated approach to environment friendliness and energy conservation in foundries. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 45-51.

Sen, P K (1996) Emerging trends in the design of pollution control system for metallurgical industries. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 30-37.

Singh, A K and Singh, R P and Sarkar, A K and Sharma, V N (1996) Fly Ash- Its Impact on Yield and Trace Metal uptake by Crops Grown in Acid Soils. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 192-198.

Singh, Ratnakar and Maulik, S C and Rafiuddin, S and Kunwar, R K and Banerjee, B and Sil, S K (1996) Recovery of Values from Mining and Industrial Wastes. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 75-85.

Singh, U P and Lal, B B and Rao, V B and Bhattacharyya, P (1996) Commissioning of Dedusting System for Electric are Furnaces and Utilisation of EAF Dusts recovered from Baghouse at SMS. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 125-128.

Sinha, S N and Agrawal, M K (1996) Minimization of Waste Generation in Steel Sectors. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 146-153.

Subramanian, S and Lahiri, A K (1996) Green processes in process metallurgy. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 22-29.

Tamhane, S M and Manthapurwar, N S and Hasan, M Z and Aggarwal, A L (1996) Technology Options for Mitigation of Foundry Emissions. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 113-124.

Vaish, A K and Singh, S D and Bhattacharya, A P and Ghosh, S B and Singh, O and Basak, A C and Maharaj, Lal and Ramachandrarao, P (1996) Utilisation of waste battery scrap. In: Environmental & waste management in metallurgical industries. NML, Jamshedpur, pp. 177-182.

Vishwanathan, P V and Gangadharan, T K (1996) Environmental and Waste Management in Iron and Steel Industry. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 199-207.

Viswanathan, P V and Gangadharan, T K (1996) Environmental and waste management in iron and steel industry. In: Environmental & waste management in metallurgical industries. NML, Jamshedpur, pp. 199-207.

Viswanathan, P V and Srinivasan, R and Mishra, K K (1996) Waste management perspective in non-ferrous industries. In: Environmental & waste management in metallurgical industries. NML, Jamshedpur, pp. 208-214.

Wate, S R and Joshi, S R (1996) Strategies for mitigation of pollution and environmental management in metallurgical industries. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries. NML, Jamshedpur, India, Jamshedpur, pp. 38-44.

Conference or Workshop Item

Agrawal, A and Pandey, B D and Kumar, Vinay and Premchand, (1996) Solvent extraction in copper metallurgy recovery of acid and metals from copper bleed stream. In: Seminar on Recovery of Valuable By - Products from Intermediate Secondaries in Non-Ferrous Industries, 1996.

Basu, G S and Sharma, R P and Dhillon, A S (1996) Dust Collecting Technologies for Blast Furnace and Steel Melting Shops. In: UNSPECIFIED.

Bhatnagar, Deepak and Biswas, Soumitra (1996) Environment and Waste Management in Metallurgical Industries - Role of databases. In: UNSPECIFIED.

Bhattacharyya, P and Sarkhel, B R and Chakrabarti, D M and Saha, P and Ghosh, S R and Chattoraj, U S (1996) Gravity Separation at Variable 'g' for Management of Mineral Wastes and Pollution. In: UNSPECIFIED.

Bhattacharyya, P and Sarkhel, B R and Chakrabarti, D M and Saha, P and Ghosh, S R and Chattoraj, U S (1996) Gravity separation at variable 'g' for management of mineral wastes and pollution. In: UNSPECIFIED.

Chakravarty, T K and Panigrahi, S K (1996) Strategies for Solid Waste Management in SAIL Steel Plants. In: UNSPECIFIED.

Chattoraj, I and Mitra, A (1996) Micromagnetic studies on hydrogenated steel. In: Trends in NDE science and technology - Proceedings of the 14th world conference on NDT, 1996, 14th WCNDT.

Chaudhuri, Sulochana and Pandey, H D (1996) Advanced Instrumental Techniques for the Analysis of Trace Metals Released from Steel Industry with Special Reference to use of ICP-AES. In: UNSPECIFIED.

Das, A and Manna, I and Pabi, S K (1996) Mathematical modelling of peritectic transformation in binary systems. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Das, A K and Mukherjee, T (1996) Optimisation of Ferro Alloy Usage in Steelmaking. In: UNSPECIFIED.

Das, S K (1996) An improved turbulence model for flow simulation in a continuous casting tundish for slabs. In: Proceedings of the National Seminar on Computer Applications in Materials and Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Das, S K and Kumar, Sanjay and Singh, K K and Ramachandrarao, P (1996) An Innovative approach towards utilisation of wastes generated from iron & steel industries. In: UNSPECIFIED.

Das, S K and Kumar , Sanjay and Singh, K K and Ramachandrarao, P (1996) An Innovative Approach towards Utilisation of Wastes Generated from Iron & Steel Industries. In: UNSPECIFIED.

Dash, Sukanta K and Ajmani, S K (1996) A fluid dynamic analysis of the blast furnace trough at Tata Steel. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Ghosh, R N (1996) Creep life prediction of single crystal superalloys. In: Proceedings of the National Seminar on Computer Applications in Materials and Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Godiwalla, K M and Ranganathan, S and Hait, Jhumki (1996) Mathematical modelling and the influence of process para-meters on the temperature profile in a submerged arc furnace producing ferro-chromium. In: Proceedings of the National Seminar on Computer Applications in Materials and Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Jana, R K and Kumar, Vinay and Saha, A K and Rao, K V and Pandey, B D and Premchand, (1996) Processing of Tungsten Alloy Scrap for the Recovery of Tungsten Metal. In: Proceedings of National Seminar on Environmental & Waste Management in Metallurgical Industries, Feb, 1996, NML, Jamshedpur.

Johri, M and Shukla, I and Bhattacharjee, D and Ghosh, K S (1996) Evaluation of efficacy of ceramic paper in controlling heat loss from steel ladles by mathematical modelling. In: Proceedings of Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Khaira, H K and Jena, A K (1996) On modeling of the Ae3 temperature of steel. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Kulgod, R and Kumar, R and Gaonkar, K B and Singh, P R (1996) Computerised control and data acquisition for corrosion experiments. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Kumar, P and Prakash, R (1996) Quality assessment of class fibre composites by acousto ultrasonic technique. In: Trends in NDE science and technology - Proceedings of the 14th world conference on NDT, 1996, 14th WCNDT.

Kumar, Rashmi and Chandra, Sanjay (1996) Prediction of dissolution time of gerromanganese in hot metal and steel bath. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Kumar, T S Prasanna (1996) Performance analysis of an efficient finite element solver for solidification simulation of continuous casting of steel billets. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Manjhi, S P and Ramachandran, N and Nalla, R N and Bajpai, M K and Tripathi, P K (1996) Mathematical model for predicting solidification and cooling of steel inside mould and in air. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Laboratory, Dec. 10-11, 1996, NML, Jamshedpur.

Manthapurwar, N S and Tamhane, S M and Hasan, M Z and Aggarwal, A L (1996) Air Pollution Problems from Cupola Furnaces in Iron Foundries. In: UNSPECIFIED.

Mishra, Sanak and Santra, A K and Gupta, V K (1996) Computer applications in steel industry. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Panda, S C and Kar, R N and Patra, P and Das, B (1996) Environmental and Waste Management in Some Mining Operations in Orissa. In: UNSPECIFIED.

Panda, S C and Ray, H S (1996) Waste Management in Some Medium Sized Metallurgical Industries. In: UNSPECIFIED.

Pandey, O N and Sarkar, A K and Sharma, V N (1996) Growth of Certain Tree Species in Fly Ash Amended Soil. In: UNSPECIFIED.

Pandey , H D and Bhattacharya, S and Maheshwari, G D and Prakash, OM and Mediratta, S R (1996) Research needs in environmental and waste management in iron & steel industries. In: UNSPECIFIED.

Ramachandrarao, P (1996) Modelling : Philosophies and Methodologies. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Rao, B V Subba and Ballal, N B (1996) Dynamic refining control model for LD converter. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Ravichandran, G and Raghupath, V P and Ganesan, N (1996) Analysis of welding distortion using finite element method. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Roy, A and Dhang, N and Gupta, O P and Manna, I (1996) Mathematical modelling of austempering by finite element method. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Roy, S and Anand, S and Sutradhar, G and Mandal, A and Iyer, K S (1996) Development of a knowledge based expert system on casting defects. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Sanyal, D (1996) Application of artificial intelligence to modelling of materials performance and processing. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Sreedhar, D and Sitaraman, T S and Ramachandran, C S (1996) Process control & instrumentation for titanium sponge plant. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Sreenivas, T and Sakthivel, N and Sankar, B Ravi and Ramakrishnan, S S (1996) A database management system for selection of steel. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Srinivas , S and Rao, K V Rama (1996) Development of a creep data base management system for engineering materials. In: Proceedings of the National Seminar on Computer Applications on Materials and Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Tarafder, S and Tarafder, Mita and Ranganath, V R (1996) Advances in computer-aided crack length measurement during fatigue crack growth testing. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Verma, Amit (1996) Computerised model for materials handling in a large mineral processing based organization. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.

Vijayalakshmi, P and Kannan, K and Subramanian, K (1996) Numerical control of laser processing and simulation of microstructures and temperature profiles - a fuzzy approach. In: Proceedings of the National Seminar on Computer Applications in Materials & Metallurgical Engineering, Dec. 10-11, 1996, NML, Jamshedpur.