Items where Year is 1976

A

Arunagiri, S and Venkataraman, G (1976) Creep rupture failures in superheater tubes of high pressure boilers. NML Technical Journal, 18 (4). pp. 81-86.

B

Basu, G and Sinha, P K and Aush, S C and Dhananjayan, N and Altekar, V A (1976) Recovery of elemental sulphur and copper values from chalcopyrite concentrates by direct leaching in ferric chloride solution. NML Technical Journal, 18 (3). pp. 29-33.

Biswas, A C and Padhi, K K and Bhattacharya, H P (1976) Simultaneous sequential spectrophotometric method for the determination of silica and alumina in iron ores and sinters. NML Technical Journal, 18 (2). pp. 25-27.

Budhani, R K (1976) Creep resistant steels for the heavy electrical industry. NML Technical Journal, 18 (4). pp. 63-68.

C

Chetal, S C and Sabharwal, M C (1976) Design basis and materials requirements for sodium heated steam generators for fast reactors. NML Technical Journal, 18 (4). pp. 73-80.

D

Das, M R and Gibbons, T B (1976) Diffusion creep in low-alloy steels. Scripta Metallurgica, 10 (3). pp. 231-233.

Director, NML (1976) Annual Report 1975-1976. NML, Jamshedpur.

H

Hargave, R V and Dasgupta, S P and Rao, M R K (1976) Blast furnace slags-A study of chemical and mineralogical composition and utilization in cement industry. NML Technical Journal, 18 (2). pp. 15-20.

M

Murthy, H P S and Chatterjee, A B and Sarkar, N B (1976) Some particulate properties of calcined petroleum coke. NML Technical Journal, 18 (1). pp. 6-9.

P

Pabi, S K (1976) A Resistometric study of zone Formation in Al-Cu-Mg alloys. NML Technical Journal, 18 (1). pp. 10-13.

Pandey, L P and Dasgupta, P and Ghose, A (1976) Spectrophotometric determination of cobalt by thioglycollic acid. NML Technical Journal, 18 (3). pp. 39-41.

S

Sharma, T L and Nag, A and Arora, S M and Trehan, Y N and Altekar, V A (1976) Anodizing of hot-dip aluminized mild and stainless steel improves corrosion and heat resistance. NML Technical Journal, 18 (1). pp. 1-5.

Sharma, T L and Trehan, Y N (1976) Integral colour anodizing of aluminium and aluminium alloys. NML Technical Journal, 18 (3). pp. 54-61.

Singh, H (1976) Some aspects of designing electric tunnel kilns for ceramic industry. NML Technical Journal, 18 (3). pp. 47-53.

Singh, Narinder and Mathur, S B (1976) Studies on extraction of selenium and tellurium from copper electrolytic slimes by sublimation in vacuum. Phosphorus sulfur and silicon and the related elements, 1 (2-3). pp. 169-176.

Singh, Raghubir and Choubey, R and Kumar, R (1976) Rationalization of the blading material for steam turbines: Their requirements and selection. NML Technical Journal, 18 (4). pp. 69-72.

Sinha, S K and Rao, G N (1976) Cellular metal. NML Technical Journal, 18 (2). pp. 21-24.

Sivaramakrishnan, C S and Kumar, Rajendra (1976) Structure of dilute Sn-Fe liquid alloys. Transactions of the Japan Institute of Metals, 17 (6). pp. 378-382.

Srivastava, S C and Ghosh, M K (1976) X-ray spectrometric analysis of low alloy steels. NML Technical Journal, 18 (3). pp. 34-38.

W

Woodrow, P A (1976) The transfer of technology from R&D laboratory to industry. NML Technical Journal, 18 (3). pp. 42-46.