Items where Subject is "Thermal Properties"

Article

Ananda Kumar, S and Sankara Narayanan, T S N (2002) Thermal properties of siliconized epoxy interpenetrating coatings. Progress in Organic Coatings, 45 (4). pp. 323-330.

Balaraju, J N and Sankara Narayanan, T S N and Seshadri, S K (2006) Structure and phase transformation behaviour of electroless Ni–P composite coatings. Materials Research Bulletin, 41 (4). pp. 847-860.

Baskaran, Irusen and Sakthi Kumar, R and Sankara Narayanan, T S N and Stephen, A (2006) Formation of electroless Ni–B coatings using low temperature bath and evaluation of their characteristic properties. Surface and Coatings Technology, 200 (24). pp. 6888-6894.

Hussain, M M and Rajinikanth, V and Munda, Parikshit (2024) Metallurgical Failure Analysis of Economizer Tube of Thermal Power Plant. Journal of Failure Analysis and Prevention, 24. pp. 352-367.

Kumar, Amarjeet and Murugaiyan, Premkumar and Panda, A K and Roy, Rajat K (2020) Effect of compositional elements and processing routes on structural and thermal response in Fe-based metallic glasses. Journal of Alloys and Compounds, 821 (IF-4.175). p. 153279.

Kumar, Rakesh and Alex, T C (2023) Phase stability and role of mechanical activation in the chemical beneficiation of red mud. Journal of Thermal Analysis and Calorimetry, 148. pp. 9813-9827.

Kumar, Roshan and Kumar, Sunil and Kailath, A J and Sahu, Ranjan K (2024) Mechanistic investigation of hydrogen generation from water and magnesium catalyst reaction: Advanced reactive molecular dynamics simulation. International Journal of Hydrogen Energy, 52 Part A. pp. 1440-1445.

Kumar, Sunil and Sahu, Ranjan K (2023) Fe-Al core-shell structure as an efficient catalyst for dual hydrogen production and storage by thermochemical water splitting: A reactive molecular dynamic simulation. International Journal of Hydrogen Energy, 52 Part A. pp. 1498-1506.

Modassir, A and Khajuria, A and Bedi, R (2020) Effect of Re-normalizing and Re-tempering on Inter-critical Heat Affected Zone(S) of P91B Steel. Manufacturing Engineering . pp. 255-270.

Mohanasundaram, M and Roy, G G and Prakash, S (2019) Thermodynamic Modelling for Design of Synthetic Slag for Inclusion Removal. Transactions of the Indian Institute of Metals , 72(4). pp. 1111-1118.

Murugaiyan, Premkumar and Bedanta, Subhankar and Jena, S K and Panda, A K and Mitra, A and Bysakh, S and Roy, Rajat K (2020) Crystallization and magnetic hardening behaviour of Fe-rich FeSiBNb(Cu) melt-spun alloys. Journal of Magnetism and Magnetic Materials, 502 (IF-2.683). p. 166528.

Murugaiyan, Premkumar and Mitra, Amitava and Roy, Rajat K and Bijalwan, P K and Dutta, Monojit and Banerjee, Atanu and Panda, A K (2020) Glass forming ability and soft-magnetic properties of Fe-based glassy alloys developed using high phosphorous pig Iron. Journal of Alloys and Compounds, 821 (IF-4.175). p. 153255.

Odusote, J K and Adeleke, A A and Lasode, O A and Malathi, M and Paswan, Dayanand (2019) Thermal and compositional properties of treated Tectona grandis. Biomass Conversion and Biorefinery, 9(3). pp. 511-519.

Polimera, Srihith and Gali, A and Nath, Susanta Kumar and Rahaman, Ariful and Chandan, Mohammed Rehaan and Balakumaran, S J (2023) Thermo-mechanical property enhancement of rigid polyurethane foam using silica and alumina as hybrid fillers over single filler. Polymer Composites, 44(10). pp. 6454-6466.

Saha, D and Chatterjee, D and Chakravarty, S and Roychowdhury, T (2019) Investigation of Environmental-Concern Trace Elements in Coal and Their Combustion Residues from Thermal Power Plants in Eastern India. Natural Resources Research, 28(4). pp. 1505-1520.

Sahu, Nilimadhaba and Biswas, A and Kapure, Gajanan and Randhawa, N S (2019) Thermochemical analysis of smelting of ferruginous manganese ore for silicomanganese production. Calphad, 66 (IF-2.652). p. 101637.

Sankara Narayanan, T S N and Selvakumar, S and Stephen, A (2003) Electroless Ni–Co–P ternary alloy deposits: preparation and characteristics. Surface and Coatings Technology, 172 (2-3). pp. 298-307.

Sankara Narayanan, T S N and Seshadri, S K (2004) Formation and characterization of borohydride reduced electroless nickel deposits. Journal of Alloys and Compounds, 365 (1-2). pp. 197-205.

Sankara Narayanan, T S N and Stephen, A and Guruskanthan, S (2004) Electroless Ni–Co–B ternary alloy deposits: preparation and characteristics. Surface and Coatings Technology, 179 (1). pp. 56-62.

Singh, Komal and Anwar, S and Dubey, Paritosh and Mishra, Suman K (2023) Enhanced thermoelectric performance of mechanically hard nano-crystalline-sputtered SnSe thin film compared to the bulk of SnSe. Journal of Materials Science: Materials in Electronics, 34(13).

Singh, R J and Jonnalaradda, K N and Guruprasad, P J and Metya, Avijit Kumar and Kushwaha, H S (2021) Effect of constitutive model on residual stress development in the pressure tube rolled joint. International Journal of Pressure Vessels and Piping, 190.

Suresh, N and Selvapandiyan, M and Arumugam, J and Sudhakar, S (2019) Crystal growth, structural, optical, magnetic and thermal properties of pure and thiourea doped L-alanine single crystals for nonlinear optical applications. Journal of Metallurgy and Materials Science, 61(1). pp. 1-9.

Verma, A K and Johari, K K and Dubey, Paritosh and Candolfi, C and Lenoir, B and Walia, S and Dhakate, S R and Gahtori, B (2023) Coupling of electronic transport and defect engineering substantially enhances the thermoelectric performance of p-type TiCoSb HH alloy. Journal of Alloys and Compounds, 947.

Thesis

Baskaran, Irusen (2007) Preparation and characterization of Nanocrystalline nickel based alloy deposits. PhD thesis, University of Madras.

Mohanta, Ojaswini (2011) Development of Co-Fe Based Nanostructured Soft Magnetic Materials for High Temperature Applications. PhD thesis, Bengal Engineering and Science University, Shibpur, Howrah.