Items where Division is "Metal Extraction and Forming" and Year is 2018

Adeleke, A A and Odusote, J K and Ikubanni, P P and Lasode, O A and Agboola, O O and Ammasi, A and Ajao, K R (2018) Dataset on the evaluation of chemical and mechanical properties of steel rods from local steel plants and collapsed building sites. Data in Brief, 21 (IF-). pp. 1552-1557.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2018) Study on production of low carbon ferrochrome from chromite concentrate. In: Manganese/Chrome Ores & Ferro-Alloy Summit, 15-16th February 2018, Visakhapatnam, India .

Ammasi , A and Pal, J (2018) Effect of Cooling Rate on Cold Compressive Strength of Carbon-Burdened Hematite Pellets. In: MINERAL PROCESSING Technology -2018, 10-12 Oct,2018, Dhanbad.

Ammasi , A and Pal, J (2018) Influence of addition of carbon on Pelletization of Hematite Ore Fines. In: Asia Steel International Conference 2018, 6-9 Feb., 2018, Mayfair Hotel, Bhubaneswar, India.

Barat, K and Sivaprasad, S and Kar, S and Tarafder, S (2018) Creep Fatigue Interaction under Different Test Variables: Mechanics and Mechanisms. Journal of Testing and Evaluation (IF-0.3). pp. 1-20.

Chalavadi, G and Singh, R K and Singh, R and Sharma, Mamta and Rath, R K and Mukherjee, A K (2018) Development of Dry Beneficiation Flow Sheet for Fine Coking Coal. International Journal of Coal Preparation and Utilization (IF-1.05). pp. 1-14.

Dhal, B and Pandey, B D and Abhilash, (2018) Mechanism elucidation and adsorbent characterization for removal of Cr(VI) by native fungal adsorbent. Sustainable Environment Research. (In Press)

Dutta, Deblina and Kumari, Archana and Panda, Rekha and Jha, Soni and Gupta, Divika and Goel, Sudha and Jha, Manis K (2018) Close loop separation process for the recovery of Co, Cu, Mn, Fe and Li from spent lithium-ion batteries. Separation and Purification Technology, 200 (IF-3.359). pp. 327-334.

Dutta, Deblina and Panda, Rekha and Jha, Manis K and Goel, Sudha (2018) Recovery of Manganese from Scrap Batteries of Mobile Phones. In: Rare Metal Technology 2018, The Minerals, Metals & Materials Series, https://doi.org/10.1007/978-3-319-72350-1_16. The Minerals, Metals & Materials Society 2018, pp. 175-183.

Dutta, Deblina and Panda, Rekha and Kumari, Archana and Goel, Sudha and Jha, Manis K (2018) Sustainable recycling process for metals recovery from used printed circuit boards (PCBs). Sustainable Materials and Technologies, 17 (IF-3.567).

Jena, P S M and Sahu, J K and Rai, R K and Das, S K and Singh, R K (2018) Influence of duplex ferritic-austenitic matrix on two body abrasive wear behaviour of high chromium white cast iron. Wear, 406 (IF-2.531). pp. 140-148.

Kumar, B Ravi and Singh, Vishal and Nanda, T and Adhikary, M and Haldar, Nimai and Venugopalan, T (2018) Effect of Tailoring Martensite Shape and Spatial Distribution on Tensile Deformation Characteristics of Dual Phase Steels. Journal of Engineering Materials and Technology, 140(2) (IF- 1.141).

Kumar, Rakesh and Kumar, Sanjay and Alex, T C and Singla, Rashmi (2018) Mapping of Calorimetric Response for the Geopolymerisation of Mechanically Activated Fly ash. Journal of Thermal Analysis and Calorimetry (IF-2.209). pp. 1-17.

Kumari, Aarti and Sahu, S K and Ranganathan, S (2018) Recovery of mixed rare earth oxide and fine powder of metallic iron from spent NdFeB magnet of wind turbines. In: 22nd International Conference on Nonferrous Minerals and Metals, 6-7th July 2018, Ranchi.

Kumari, Archana and Jha, Manis K and Pathak, D D (2018) Review on the Processes for the Recovery of Rare Earth Metals (REMs)from Secondary Resources. In: Rare Metal Technology 2018, The Minerals, Metals & Materials Series, https://doi.org/10.1007/978-3-319-72350-1_5. The Minerals, Metals & Materials Society 2018, pp. 53-65.

Kumari, Archana and Jha, Manis K and Pathak, D D and Chakravarty, S and Lee, Jae-chun (2018) Processes developed for the separation of europium (Eu) from various resources. Separation & Purification Reviews - (formerly Separation and Purification Methods) (IF-4.212). pp. 1-31.

Meshram, Pratima and Abhilash, and Pandey, B D and Mankhand, T R and Deveci, Haci (2018) Extraction of metals from spent lithium ion batteries: role of acid, reductant and process intensification in recycling. 25(4):368-375, 25(4) (IF-0.348). pp. 368-375.

Meshram, Pratima and Ghosh, Anirban and Ramamurthy, Y and Pandey, B D and Abhilash, and Torem, M L (2018) Removal of Cr(VI) from mine effluents by ion exchange resins-comparative study of Amberlite IRA 400 And IRA 900. Russian Journal of Nonferrous Metals. (In Press)

Mishra, D and Sahu, K K and Agrawal, A (2018) Process integration for material synthesis from a deactivated catalyst: Studies on the interaction of metal ions between two immiscible phases. Journal of Hazardous Materials, 344 (IF-6.434). pp. 169-178.

Nath, S K (2018) Geopolymerization behavior of ferrochrome slag and fly ash blends. Construction and Building Materials, 181 (IF-3.485). pp. 487-494.

Nath, S K and Kumar, Sanjay (2018) The potential use of silico-manganese slag into cementitious materials. In: Asia Steel International Conference 2018, 6-9 Feb., 2018, Mayfair Hotel, Bhubaneswar, India.

Nath, S K and Kumar, Sanjay (2018) Influence of Granulated Silico-Manganese Slag on Compressive Strength and Microstructure of Ambient Cured Alkali-Activated Fly Ash Binder. Waste and Biomass Valorization, 10 (IF-1.337). pp. 2045-2055.

Nguyen, Tam Thi and Yoo, Kyoungkeun and Jha, Manis K and Park, Jayhyun and Choi, Uikyu and Choe, Hongil and Lee, Jae-chun (2018) Removal of Heavy Metals from Tailing in Citrate Solution with Ferric Chloride. Materials Transactions, Vol. 5. pp. 1665-1668.

Oellers, T and Raghavan, R and Chakraborty, J and Kirchlechner, C and Kostka, A and Liebscher, CH and Dehm, G and Ludwig, A (2018) Microstructure and mechanical properties in the thin film system Cu-Zr. Thin Solid Films, 645 (IF- 1.879). pp. 193-202.

Pal, Jagannath and Ghorai, S and Venugopalan, T (2018) Effect of high Blaine iron ore fines in hematite ore pelletization for blast furnace. Mineral Processing and Extractive Metallurgy. (In Press)

Panda, Rekha and Jha, Manis K and Pathak, D D (2018) Commercial Processes for the Extraction of Platinum Group Metals (PGMs). In: Rare Metal Technology 2018, The Minerals, Metals & Materials Series, https://doi.org/10.1007/978-3-319-72350-1_11. The Minerals, Metals & Materials Society 2018, pp. 119-130.

Rajshekar, Y and Pal, J and Venugopalan, T (2018) Development of hematite ore pellet utilizing mill scale and iron ore slime combination as additive. Journal of Mining and Metallurgy Section B: Metallurgy, 54(2). pp. 197-208.

Rajshekhar, Y and Pal, J and Venugopalan, T (2018) Mill scale as a potential additive to improve the quality of hematite ore pellet. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.5). pp. 202-210.

Roy, Nilima and Bhardwaj, A and Kujur, A and Ghosh, M and Singh, R and Meena, L K and Das, Goutam and Chattoraj, I (2018) Effect of heterogeneities on pitting potential of line pipe steels: An adaptive neuro-fuzzy approach. Corrosion science, 133 (IF-5.245). pp. 327-335.

Shah, Minal and Bakshi, Subhankar Das (2018) Three body abrasive wear of carbide-free bainite martensite and bainite-martensite structure of similar hardness. Wear, 402–403 (IF-2.531). pp. 207-215.

Sharma, Sailaja and Kumar, B Ravi and Kashyap, B P and Prabhu, N (2018) Effect of stored strain energy heterogeneity on microstructure evolution of 90% cold rolled AISI 304L stainless steel during interrupted annealing treatment. Materials Characterization, 140 (IF-2.714). pp. 72-85.

Sinha, Shivendra and Mishra, D and Agrawal, A and Sahu, K K (2018) Aqueous process intensification through enhanced oxygen mass transfer using oxygen vector: An application to cleaner leaching. Journal of Cleaner Production, 176 (IF-5.715). pp. 452-462.

Y, Rajshekar and Pal, J and T, Venugopalan (2018) Sintering characteristics and kinetics of acidic haematite ore pellets with and without mill scale addition. Ironmaking and Steelmaking, 45(4). pp. 325-334.