Items where Division is "Metal Extraction and Forming" and Year is 2016

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | G | H | J | K | M | N | P | R | S
Number of items: 72.

A

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2016) Smelting characteristics of fluxed chromite sinter and its performance assessment in electric arc furnace to produce high carbon ferrochrome. Ironmaking & Steelmaking, 43(2) (IF-0.985). pp. 97-111.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2016) Utilization of low grade chromite ore fines to recover chromium as charge-chrome. In: 20th National conference on Non-ferrous minerals and metals-2016, 8-9th July, 2016, Jamshedpur .

Agrawal, A and Mishra, D and Sahu, K K (2016) Comparative performance assessment of solvents for the extraction of H2SO4 from spent electrolytic bleed stream of copper industry. Journal of Molecular Liquids, 220 (IF-3.648). pp. 82-91.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2016) Mechanical Activation of Al-oxyhydroxide Minerals–A Review. Mineral Processing and Extractive Metallurgy Review, 37(1) (IF-1.219). pp. 1-26.

Ammasi, A and Pal, J (2016) Replacement of bentonite in hematite ore pelletisation using a combination of sodium lignosulphonate and copper smelting slag. Ironmaking and Steelmaking, 43(3) (IF-0.985). pp. 203-213.

Anand, Kumar Aniket and Nageswaran, Kartik and Kumar, Vinod and Saxena, Atul (2016) Hot deformation studies on 2.7% Si steel using gleeble thermo-mechanical simulator. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 251-258.

Anand, Rounak Sneh and Kumar, Prakash and Paswan, Dayanand (2016) Conversion of Sponge Iron From Low Grade Iron ore And Mill Scale Through Simulating Tunnel Kiln Condition. IOSR Journal of Mechanical and Civil Engineering, 13(5) . pp. 49-54.

B

Bhattacharya, Maitreyee (2016) Reaction Mechanism and Thermodynamics of Segregation Roasting of Iron Oxide. International Journal of Mineral Processing and Extractive Metallurgy, 1(5) . pp. 64-69.

Biswas, D K and Choudhury, Arijit (2016) Pollution management with techno-economical evaluation for coke based and cokeless furnaces concerning melting and casting of brass and bell metal. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 201-211.

C

Chakraborty, A and Adhikary, M and Venugopalan, T and Nanda, T and Kumar, B R (2016) Effect of ferrite-martensite interface morphology on bake hardening response of DP590 steel. Materials Science and Engineering A-Structural Materials Properties Micro structure and Processing, 676 (IF-3.094). pp. 463-473.

Chatterjee, Sandip and Kumari, Archana and Jha, Manis K (2016) Sustainable Recycling Technology for Electronic Waste. In: Sustainability in the mineral and energy sectors. Taylor & Francis Group, 6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 33487-2742 CRC Press, Boca Raton, pp. 189-204. ISBN 978-1-4987-3302-1

D

Divya, M and Das, C R and Ghosh Chowdhury, S and Albert, S K and Bhaduri, A K (2016) Effect of Grain Boundary Character Distribution on the Impact Toughness of 410NiMo Weld Metal. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 47A(7) (IF-1.874). pp. 3397-3411.

Djobo, J N Y and Elimbi, A and Tchakoute, H K and Kumar, Sanjay (2016) Mechanical activation of volcanic ash for geopolymer synthesis: effect on reaction kinetics, gel characteristics, physical and mechanical properties. RSC Advances, 6(45) (IF 3.169). pp. 39106-39117.

Djobo, J N Y and Elimbi, A and Tchakoute, H K and Kumar, Sanjay (2016) Reactivity of volcanic ash in alkaline medium, microstructural and strength characteristics of resulting geopolymers under different synthesis conditions. Journal Of Materials Science, 51(22) (IF-2.599). 10301-10317.

Dutta, Deblina and Goel, Sudha and Hait, Jhumki and Jha, Manis K (2016) E-waste generation, management, utilization and recycling : A review. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 89-98.

E

Elzohiery, Mohamed and Mohassab, Yousef and Pal, J and Zhang, Shengqin and Sohn, Hong Yong (2016) Reduction kinetics of magnetite concentrate particles with H2 + CO at 1200 to 1600 oC relevant to a novel Ironmaking process. 7th International Symposium on High-Temperature Metallurgical Processing . pp. 35-41.

G

Gharami, Kalpataru and Patra, H R and Kumar, Manoj and Randhawa, N S (2016) Thermodynamic consideration and phase evolution during oxidation of tungsten-copper electrical contactor scraps. Russian Journal Of Non-Ferrous Metals, 57(4) (IF-0.238). pp. 361-366.

H

Harsh Raj, and Jha, S K and Paswan, Dayanand (2016) Optimization of Process Parameter for Smelting and Reduction of Ferrochrome. International Journal of Engineering Research & Technology, 5(10) .

Hazra, B and Varma, Atul K and Bandyopadhyay, A K and Chakravarty, S and Buragohain, J and Samad, S K and Prasad, A K (2016) FTIR, XRF, XRD and SEM characteristics of Permian shales, India. Journal of Natural Gas Science and Engineering, 32 (IF-2.718). pp. 239-255.

J

Jha, Manis K and Kumari, Archana and Panda, Rekha and Kumar, J Rajesh and Yoo, Kyoungkeun and Lee, J Y (2016) Review on hydrometallurgical recovery of rare earth metals. Hydrometallurgy, 165 (IF-2.605). 2-26 .

Jha, Manis K and Kumari , Archana and Panda, Rekha and Jyothi , Rajesh Kumar and Yoo, Kyoungkeun and Lee, Jin-Young (2016) Review on hydrometallurgical recovery of rare earth metals. Hydrometallurgy, 165/1 .

Joseph, O O and Loto, C A and Sivaprasad, S and Ajayi, J A and Fayomi, O S I (2016) Comparative assessment of the degradation mechanism of micro-alloyed steel in E20 and E80 simulated fuel grade ethanol environments. Technologies and Materials for Renewable Energy, Environment and Sustainabilty: TMREES, 1758 (NON-SCI).

K

Kumar, K and Randhawa, N S and Gharami, Kalpataru and Sau, D C and Kumar, Manoj (2016) Studies on dissolution kinetics of dolime in electrothermal magnesium slag. Russian Journal of non-ferrous metals, 57(4) (IF-0.238). pp. 287-295.

Kumar, Sujeet and Djobo, Jean NoëlYankwa and Kumar, Anil and Kumar, Sanjay (2016) Geopolymerization behavior of fine iron-rich fraction of brown fly ash. Journal of Building Engineering, 8 (IF-1.055). pp. 172-178.

Kumar, Vinod (2016) Thermo-mechanical simulation using gleeble system - advantages and limitations. Journal of Metallurgy and Materials Science, 58(1) (IF- 0.04). pp. 81-88.

Kumari, Aarti and Sinha, Manish K and Sahu, S K and Pandey, B D (2016) Solvent Extraction and Separation of Trivalent Lanthanides Using Cyphos IL 104, a Novel Phosphonium Ionic Liquid as Extractant. Solvent Extraction and Ion Exchange, 34(5) (IF- 2.456). pp. 469-484.

Kumari, Aarti and Sinha, Manish K and Sahu, S K and Panday, B D (2016) Investigation of a novel ionic liquid, Cyphos IL 104 for the solvent extraction of mineral acids. Hydrometallurgy, 165 (IF- 2.605). 159-165.

Kumari, Anjan and Jha, Manis K and Lee, Jae-chun and Singh, Rajendra Prasad (2016) Clean process for recovery of metals and recycling of acid from the leach liquor of PCBs. Journal of Cleaner Production, 112( 5) (IF-3.844). pp. 4826-4834.

Kumari, Anjan and Jha, Manis K and Singh, R P (2016) Recovery of metals from pyrolysed PCBs by hydrometallurgical techniques. Hydrometallurgy, 165 (IF- 2.605). 97 -105 .

Kumari, Anjan and singh, R P and Jha, Manis K and Kumar, Vinay (2016) Extraction of copper from small electronic devices populated on discarded PCBs. In: Education in Chemical Science and Technology. Indian Chemical Society, Kolkata, pp. 81-91.

Kumari, Anju and Singh, Ravinder and Goswami, N G (2016) Seasonal variation of heavy metals in Subarnarekha River at Jamshedpur, East Singhbhum, Jharkhand. Journal of Metallurgy and Materials Science, 58(3) (IF- 0.04). pp. 159-166.

M

Mahato, P and Singh, R J and Pathak, L C and Mishra, Suman K (2016) Effect of nitrogen on mechanical, oxidation and structural behaviour of Ti–Si–B–C–N nanocomposite hard coatings deposited by DC sputtering. Surface and Interface Analysis, 48(10) (IF- 1.132). pp. 1080-1089.

Maity, S K and Rajak, A K and Shekhar, M Chander and Singh, S D (2016) Development of Ultra High Strength Steel by Electroslag Refining and Thermomechanical Treatment. Transations of the Indian Institute Metals, 69(3) (IF- 0.533). pp. 705-716.

Mehrotra, S P and Alex, T C and greifzu, G and Kumar, Rakesh (2016) Mechanical Activation of Gibbsite and Boehmite: New Findings and their Implications. Transactions of the indian institute of metals, 69(1) (IF-0.533). pp. 51-59.

Meraj, Md and Pramanik, Susanta and Pal, J (2016) Role of MgO and Its Different Minerals on Properties of Iron Ore Pellet. Transaction of the Indian Institute of Metals, 69(6) (IF- 0.533). pp. 1141-1153.

Meshram, Pratima and Abhilash, and Kumari, Jyotsna and Pandey, B D (2016) Extraction of vanadium and synthesis of vanadium pentaoxide from Bayer's sludge. Russian Journal Of Non-Ferrous Materials, 57(4) (IF-0.238). pp. 338-346.

Meshram, Pratima and Abhilash, and Panday, B D and Mankhand, T R and Deveci, Haci (2016) Acid baking of spent lithium ion batteries for selective recovery of major metals: A two-step process. Journal of Industrial and Engineering Chemistry, 43 (IF- 4.421). pp. 117-126.

Meshram, Pratima and Abhilash, and Pandey, B D and Mankhand, T R and Deveci, Haci (2016) Comparision of Different Reductants in Leaching of Spent Lithium Ion Batteries. Journals of Metals, 68(10) (IF-1.860). pp. 2613-2623.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2016) Process optimization and kinetics for leaching of rare earth metals from the spent Ni–metal hydride batteries. Waste Management, 51 (IF-4.030). pp. 196-203.

Meshram, R B and Kundu, G and Mukherjee, D (2016) Heat Transfer Studies in Ejector-induced Downflow Bubble Column. International Journal of Chemical Reactor Engineering, 1(5) (IF-0.623). pp. 955-964.

Mishra, Suman K and Sherbakov, V A (2016) In-situ synthesis of Ti-Si-C fine grained composite with different amount of TiC: Microstructure and mechanical properties. International Journal Of Refractory Metals & Hard Materials, 59 (IF- 2.155). 19-25.

Mishra, Suman K and Kumar, V and Tiwari, S K and Mishra, T and Angula, G and Adhikari, S (2016) Development and degradation behavior of protective multilayer coatings for aluminum reflectors for solar thermal applications. Thin Solid Films, 619 (IF- 1.879). pp. 202-207.

Mondal, S and Mohanasundaram, M and Sau, D C and Gupta, R K and Kumar, Manoj and Paul, K K and Sirshendu, Dey (2016) Modeling heat transfer of the electrothermal reactor for magnesium production. International Journal of Thermal Sciences, 102 (IF-3.615). pp. 274-284.

Mukherjee, K and Matlock, DK (2016) Simulation of bar rolling in gleeble. Journal of Metallurgy and Materials Science, 51(1) (IF- 0.04). pp. 65-68.

N

Nath, S K and Maitra, S and Mukherjee, S and Kumar, Sanjay (2016) Microstructural and morphological evolution of fly ash based geopolymers. Construction and Building Materials, 111 (IF-3.169). pp. 758-765.

Noor, Aman and Das, N N and Mishra, T (2016) Effect of N-doping on visible light activity of TiO2–SiO2 mixed oxide photocatalysts. Journal Of Environmental Chemical Engineering, 4(1) (IF-1.355). pp. 191-196.

P

Pal, J (2016) Utilization of micro fines in iron and steel making process. Steel World, June . pp. 86-90.

Panda, Rekha and Jha, Manis K and Hait, Jhumki and Kumar, G and Singh, R J and Yoo, Kyoungkeun (2016) Extraction of lanthanum and neodymium from leach liquor containing rare earth metals (REMs). Hydrometallurgy, 165 (IF- 2.605). pp. 106-110.

Panda, Rekha and Kumari, Archana and Hait, Jhumki and Jha, Manis K (2016) Extraction and separation of zinc and chromium from electroplating effluent. Journal of Metallurgy and Materials Science , 58(4) (IF- 0.04). pp. 181-190.

Parmar, Kavita and Bhattacharjee, S (2016) Adsorption of Zn(II) ions on Calcium Silicate Precipitation Tube (CaSPT) produced through 'silica garden' route. Hydrometallurgy, 165 (IF- 2.605). pp. 137-142.

Paswan, Dayanand (2016) An over view on testing of Raw materials. National Workshop on Experimental techniques in extractive metallurgy (ETEM-2016) . pp. 83-92.

Paul, Surajit Kumar (2016) Prediction of complete forming limit diagram from tensile properties of various steel sheets by a nonlinear regression based approach. Journal of Manufacturing Processes, 23 (IF- 2.322). pp. 192-200.

Pramanik, S and Sinha, Manish K and Kumari, Aarti and Jha, Manis K and Sahu, S K (2016) Recovery of Rare Earth Oxide from Phosphor Powder of Spent Fluorescent Lamp. In: Hydrometallurgy Conference 2016: Sustainable Hydrometallurgical Extraction of Metals, 1–3 August 2016, Cape Town, South Africa.

R

Rajshekhar, Y and Alex, T C and Sahoo, D P and Babu, G A and Balakrishnan, V and Venugopalan, T and Kumar, Sanjay (2016) Iron ore slime as an alternate coolant in steelmaking: Performance evaluation at commercial scale. Journal Of Cleaner Production, 139 (IF- 5.715). pp. 886-893.

Raju, G B and Ratchambhigai, S and Rao, M A and Vasumathi, N and Kumar, TVV and Prabhakar, S and Rao, S Subba (2016) Beneficiation of Barite Dumps by Flotation Column; Lab-Scale Studies to Commercial Production. Transactions of the Indian Institute of Metals, 69(1) (IF-0.533). pp. 75-81.

Randhawa, N S and Gharami, Kalpataru and Kumar, Manoj (2016) Leaching kinetics of spent nickel-cadmium battery in sulphuric acid. Hydrometallurgy, 165 (IF- 2.605). pp. 191-198.

Randhawa, N S and Hait, Jhumki and Jana, R K (2016) A brief overview on manganese nodules processing signifying the detail in the Indian context highlighting the international scenario. Hydrometallurgy, 165 (IF- 2.605). pp. 166-181.

Randhawa, N S and Kumar, Manoj and Kumar, Hemant and Prasad, Sanjay (2016) Enhancing titania value of a weathered ilmenite by reduction roasting - acid leaching. National coference on non-ferrous minerals & materials- 2016 . pp. 30-34.

Randhawa, N S and Sau, D C and Kumar, Manoj (2016) Direct electrolytic refining of end-of-life industrial copper waste scraps for production of high purity copper powder. Russian journal of non-ferrous metals, 57(4) (IF-0.204). pp. 367-373.

Ranjan, P and Pal, J (2016) Salt solution treatment to prevent the low temperature reduction degradation of haematite pellet. Ironmaking and Steelmaking , 43(9) (IF-0.985). pp. 688-696.

Roy, Rajat K and Panda, A K and Mitra, Amitava (2016) Effect of Co content on structure and magnetic behaviors of high induction Fe-based amorphous alloys. Journal Of Magnetism And Magnetic Materials, 418 (IF- 2.630). 236-241.

S

Sahoo, Gadadhar and Kumar, Vinod and Singh, Balbir and Sexena, Atul (2016) Hot ductility study on high P and Cu containing low alloy steel. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 153-158.

Santosh, R and Singh, P K and Das, Goutam and Korody, J and Das, S K and Kumar, S and Ghosh, M (2016) Effect of different parameters on uncertainty during evaluation of strength of dissimilar metal weld. Materialwissenschaft und Werkstofftechnik, 47(9) (IF-0.524). pp. 845-851.

Shaik, A A and Kashyap, B P and Chauthai, A (2016) Identification of favorable hot working condition for Ti-6 Al-4V. Journal of Metallurgy and Materials Science, 58(1) . pp. 9-18.

Sharma, S and Nanda, T and Adhikary, M and Venugopalan, T and Kumar, B Ravi (2016) A simulation study of pearlite-to-austenite transformation kinetics in rapidly heated hot-rolled low carbon steel. Materials and Design, 107 (IF-4.364). pp. 65-73.

Singh, C B and Gupta, R N and Vaish, A K and Roy, B N (2016) Effect of scale-up, design and process parameters on the productivity of ancient iron making process and recovery of iron in the product. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 191-199.

Singh, Rajesh Kumar (2016) Corrosion protection of transport vehicles by nanocoating of decahydrobenzxo[8] annulene-5, 10 dihyrazone and SiC filter in H O O (moist), CO , 2 3 2 2 SO environments and weather change. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 167-179.

Singh, Ranapratap and Pawar, Puneet (2016) Optimization and crashworthiness investigation of empty and aluminium foam filled square tubes. Journal of Metallurgy and Materials Science, 58(4) (IF-0.04). pp. 231-241.

Singh, S and Nanda, T and Ravi Kumar, B and Singh, V (2016) Controlled Phase Transformation Simulations to Design Microstructure for Tailored Mechanical Properties in Steel. Materials and Manufacturing Processes, 31(15) (IF-2.274). pp. 2064-2075.

Sinha, Manish K and Sahu, S K and Pramanik, S and Prasad , L B and Panday, B D (2016) Recovery of high value copper and zinc oxide powder from waste brass pickle liquor by solvent extraction. Hydrometallurgy, 165 Part 1 (IF-2.605). 182-190.

Sinha, Manish K and Pramanik, Swati and Sahu, S K and Prasad, L B and Jha, Manis K and Pandey, B D (2016) Development of an efficient process for the recovery of zinc and iron as value added products from the waste chloride solution. Separation and Purification Technology, 167 (IF-3.359). pp. 37-44.

Sinha, Shivendra and Abhilash, and Meshram, Pratima and Pandey, B D (2016) Metallurgical processes for the recovery and recycling of lanthanum from various resources—A review. Hydrometallurgy, 160 (IF-2.605). pp. 47-59.

This list was generated on Fri Mar 29 14:38:20 2024 IST.