Items where Division is "Metal Extraction and Forming" and Year is 2014

A

Abhilash, and Sinha, Manish K and Sinha, Shivendra and Pandey, B D (2014) Extraction of lanthanum and cerium from Indian red mud. International Journal of Mineral Processing, 127 (IF-1.461). pp. 70-73.

Abhilash and Sinha, Shivendra and Meshram, Pratima and Pandey, B D and Behera, P K and Satapathy, B K (2014) RedMud: A Secondary Resource for Rare Earth Elements. In: International Bauxite, Alumina and Aluminium Symposium-IBAAS 2014, 27-29th November 2014, Vishakapatnam, India.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2014) Development of Chromite Sinter from Ultra-Fine Chromite Ore by Direct Sintering. ISIJ International, 54(3) (IF-1.0). pp. 559-566.

Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2014) Effect of SiO2 on the reduction of chromite sinter for ferrochrome production. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM) 2014, 12-15 November 2014, College of Engineering, Pune (COEP).

Alex, T C (2014) An insight into the changes in the thermal analysis curves of boehmite with mechanical activation. Journal of Thermal Analysis and Calorimetry, 117 (IF-2.206). pp. 163-171.

Ammasi, A and Pal, J (2014) Effect of an organic binder and copper slag on pelletization of hematite ore eliminating bentonite. Masters thesis, AcSIR, CSIR-NML , .

B

Bhattacharya, S and Dhar, S and Das, S K and Ganguly, Ranjan and Webster, T J and Nayar, S (2014) Colloidal graphite/graphene nanostructures using collagen showing enhanced thermal conductivity. International Journal of Nanomedicine, 9 (IF-4.195). pp. 1287-1298.

Bhattacharya, S and Sheikh, Lubna and Tiwari, V and Ghosh, M and Patel, J N and Patel, A B and Nayar, S (2014) Protein-Polymer Functionalized Aqueous Ferrofluids Showing High T2 Relaxivity. Journal of Biomedical Nanotechnology, 10(5) (IF-7.578). pp. 811-819.

C

Choi, Seo-Young and Nguyen, Viet Tu and Lee, Jae-chun and Kang, Ho and Pandey, B D (2014) Liquid–liquid extraction of Cd(II) from pure and Ni/Cd acidic chloride media using Cyanex 921: A selective treatment of hazardous leachate of spent Ni–Cd batteries. Journal of Hazardous Materials, 278 (IF-4.331). pp. 258-266.

Choubey, Pankaj K and Jha, Manis K and Gupta, Divika and Jeong, Jinki and Lee, Jae-chun (2014) Recovery of rare metal indium (In) from discarded LCD monitors. In: EPD Congress-2014, 16/02/2014 To 20/02/2014, San Diego Convention Center, San Diego, California. USA..

D

Datta, A K (2014) Low cycle fatigue life prediction of thin stiffened plates under repetitive stresses. In: International conference on Fatigue Damage of Structural Materials X, September 21-26, 2014, Hyannis, USA.

Datta, A K (2014) Responses of stiffened plates with varying depth of stiffeners under uniform lateral loads. In: International conference on Fatigue Damage of Structural Materials X, September 21-26, 2014, Hyannis, USA.

Dhal, B and Abhilash and Pandey, B D (2014) Microbial sorption studies for removal of trivalent chromium from model tanning bath. Advanced Materials Research, 828. pp. 33-44.

G

Gostu , S and Mishra, D and Sahu, K K and Agrawal, A (2014) Precipitation and characterization of zinc borates from hydrometallurgical processing of zinc ash. Materials Letters, 134 (IF-2.269). pp. 198-201.

H

Hung Ha, Vinh and Lee, Jae-chun and Huyunh, Trung Hai and Jeong, Jinki and Pandey, B D (2014) Optimizing the thiosulfate leaching of gold from printed circuit boards of discarded mobile phone. Hydrometallurgy, 149 (IF-2.224). pp. 118-126.

J

Jha, Manis K and Gupta, Divika and Choubey, Pankaj K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2014) Solvent extraction of copper, zinc, cadmium and nickel from sulfate solution in mixer settler unit (MSU). Separation and Purification Technology, 122 (IF-3.065). pp. 119-127.

Jha, Manis K and Gupta, Divika and Lee, Jae-Chun and Kumar, Vinay and Jeong, Jinki (2014) Solvent extraction of platinum using amine based extractants in different solutions: A review. Hydrometallurgy, 142 (IF-2.224). pp. 60-69.

0140NF2013 (2014) A process for the recovery of rare earth metals yttrium, lanthanum, terbium & europium from scrap fluorescence tube. .

K

Katiyar, P K and Randhawa, N S and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2014) Anodic Dissolution Behaviour of Tungsten Carbide Scraps in Ammoniacal Media. Advanced Material Research, 828 (IF-). pp. 11-20.

Katiyar, P K and Randhawa, N S and Hait, Jhumki and Jana, R K and Singh, K K and Mankhand, T R (2014) An overview on different processes for recovery of valuable metals from tungsten carbide scrap. In: International Conference on Nonferrous Minerals and Metals (ICNFMM), July 2014, Nagpur.

Kumar, Sanjay and Kumar, Rakesh (2014) Geopolymer : Cement for low carbon economy. The Indian Concrete Journal, 88(7). pp. 29-37.

Kumar, Vinay and Jha, Manis K and Kumari, Archana and Panda, Rekha and Kumar, J Rajesh and Lee, J Y (2014) Recovery of rare earth metals (REMs) from primary and secondary resources: a review. In: EPD Congress-2014, 16/02/2014 To 20/02/2014, San Diego Convention Center, San Diego, California. USA..

Kumar, Vinod and Kumari, Anjan and Jha, Manis K and Vidyadhar, A and Soni, B K (2014) Recycling of valuable metals from poly cracker ash of printed circuit boards (PCBS) by physical beneficiation and hydrometallurgical treatment. In: EPD Congress-2014, 16/02/2014 To 20/02/2014, San Diego Convention Center, San Diego, California. USA..

Kumari, Aarti and Sinha, Manish K and Sahu, S K and Pandey, B D (2014) Extractive separation of La and Nd using Ionic Liquid as extractant. In: 18th International Conference on Non-ferrous Minerals & Metals -2014, 11-12 July, 2014, Nagpur.

M

Maity, S K and Rajak, A K and Chandra Shekhar, M and Singh, S D (2014) Development of 0.2C-CrMnMoV Ultra High Strength Steel. International Journal of Scientific Engineering and Technology, 3(2). pp. 101-108.

Malathi, M and Godiwalla, K M and Kumar, A and Chacko, E Z and Ajmani, S K and Ranganathan, S (2014) Generation of magnesium for in-situ desulphurisation–investigations on influence of inert gas flowrate. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 123/2 (IF-0.690). pp. 67-74.

Malathi, M and Kumar, Anil and Godiwalla, K M and Chacko, Z E and Ajmani, S K and Ranganathan, S (2014) Cold Model Study of Submerged Peripheral Gas Bubbling from a Cylindrical Dispenser. ISIJ International, 54(10) (IF-1.0). pp. 2239-2247.

Malathi, M and Roy, T K and Shainu, S and Ajmani, S K and Paswan, Dayanand and Prakash, S and Mahashabde, V V (2014) Prediction of Longitudinal Facial Crack and Optimization of Process Parameters during Continuous Casting of Slabs Using Artificial Neural Network Models. Tata search, 2. pp. 227-235.

Mandal, D and Ghosh, M and Pal, J and Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Ghosh, Sukomal (2014) Evolution of microstructure and mechanical properties under different austempering holding time of cast Fe–1.5Si–1.5Mn–V steels. Materials & Design, 54 (IF-3.171). pp. 831-837.

Md., Meraj and Pramanik, Susanta and Pal, J (2014) Effect of MgO bearing flux material of different sources in iron ore pellets. Masters thesis, CSIR-NML and NIT-Durgapur.

Meshram, Pratima and Kumari, Jyotsna and Abhilash and Pandey, B D (2014) Extraction of V2O5 from Bayer�s Sludge - An Overview. In: Int Bauxite,Alumina and Aluminium Symposium-IBAAS 2014, 27-29th November 2014, Vishakapatnam, INDIA.

Meshram, Pratima and Pandey, B D and Mankhand, T R (2014) Extraction of lithium from primary and secondary sources by pre-treatment, leaching and separation: A comprehensive review. Hydrometallurgy, 150 (IF-2.224). pp. 192-208.

Mucsi, G and Molnar, Zoltan and Kumar, Sanjay (2014) Geopolymerisation of Mechanically Activated Lignite and Brown Coal Fly Ash. Acta Physica Polonica A, 126 (IF-0.6). pp. 994-998.

Mucsi, G and Molnar, Zoltan and Racz, Adam and Faitli, Jozsef and Gombkoto, Imre and Raczkevi, Balazs and Kumar, Sanjay (2014) High energy density milling as a tool for improving the properties of fly ash based geopolymer. In: XXVI International Mineral Processing Congress (IMPC) 2014 Proceedings, October 20-24, 2014, Santiago, Chile.

N

Nath, S K and Kumar, Sanjay and Kumar, Rakesh (2014) Effect of mechanical activation on cordierite synthesis through solid-state sintering method. Bulletin of Material Science, 37(6) (IF-0.8). pp. 1221-1226.

Nath, S K and Mukherjee, S and Maitra, S and Kumar, Sanjay (2014) Ambient and Elevated Temperature Geopolymerization Behaviour of Class F Fly Ash. Transactions of the Indian Ceramic Society, 73(2) (IF-0.233). pp. 126-132.

Nguyen, N V and Lee, Jae-chun and Jeong, Jinki and Kim, Byung-Su and Pandey, B D (2014) Selective recovery of cobalt, nickel and lithium from sulfate leachate of cathode scrap of Li-ion batteries using liquid-liquid extraction. Metals and Materials International, 20(2) (IF-1.2). pp. 357-365.

P

Pal, J and Chelladurai, Arunkumar and Yamuzala, Rajshekhar and Das, Goutam and Goswami, M C and Venugopalan, T (2014) Development on Iron Ore Pelletization Using Calcined Lime and MgO Combined Flux Replacing Limestone and Bentonite. ISIJ International, 54 (IF-1.6). pp. 2169-2178.

Pal, J and Ghorai, S and Goswami, M C and Prakash, S and Venugopalan, T (2014) Development of Pellet-Sinter Composite Agglomerate for Blast Furnace. ISIJ International, vol 54 (IF-1.0). pp. 620-627.

Panda, Rekha and Kumari, Archana and Jha, Manis K and Hait, Jhumki and Kumar, Vinay and Kumar, J Rajesh and Lee, Jin-Young (2014) Leaching of rare earth metals (REMs) from Korean monazite concentrate. Journal of Industrial and Engineering Chemistry, 20(4) (IF-2.063). pp. 2035-2042.

Paswan, Dayanand and Minj, R K and Singh, S D and Vaish, A K and Ghorai, S and Malathi, M and Mehta, K D and Prasad, S and Venugopalan, T (2014) Exploitation of banded hematite quartzite and Jhama coal for the production of higher grade ferro-silicon. IIM Metal News, 17(4). pp. 23-28.

Paswan, Dayanand and Vaish, A K and Singh, S D and Ghorai, S and Malathi, M and Prasad, S and Minj, R K (2014) Production of Alloy Cast Iron from Multi–Metallic Magnetite Ore of Nagaland. Steel World 2013, 19/11. pp. 36-38.

Patel, Bhargav C and Sinha, Manish K and Tipre, D R and Abhilash, and Dave, S R (2014) A novel biphasic leaching approach for the recovery of Cu and Zn from polymetallic bulk concentrate. Bioresource Technology, 157 (IF-5.039). pp. 310-315.

Poddar, Palash and Das, Arpan and Sahoo, K L (2014) Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys. Metallurgical and Materials Transactions A, 45A(4) (IF-1.7). pp. 2270-2283.

Poddar, Palash and Das, Arpan and Sahoo, K L (2014) Dry sliding wear characteristics of rheocast Mg–Sn based alloys. Materials & Design, 54 (IF-3.171). pp. 820-830.

Purohit, Bijoy Kumar and Pramanik, Swati and Meshram, Pratima and Sahu, S K and Pandey, B D (2014) Chemical beneficiation of Hingula coal. Journal of Metallurgy and Materials Science, 56(3). pp. 173-177.

R

Randhawa, N S and Dwivedi, A D and Prajapati, S and Jana, R K (2014) Utilisation of sea nodules leaching residue for adsorption of Ni(II) ions. In: National Seminar on Exploitation of Lean Grade Ore, Ore Fines and Urban Ores: Challenges, Problem and Solutions (LGO-2013), 22-23 January, 2013, CSIR-NML, Jamshedpur.

Randhawa, N S and Jana, R K (2014) Efficient removal of aqueous lead by leached sea nodules residue. Desalination and Water Treatment (IF-0.987). pp. 1-11.

Randhawa, N S and Murmu, Nisha and Tudu, Shakuntala and Sau, D C (2014) Iron oxide waste to clean arsenic-contaminated water. Environmental Chemistry Letters, 12(4) (IF-1.906). pp. 517-522.

Randhawa, N S and Sau, D C (2014) Iron oxide waste to clean arsenic-contaminated water. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM), 12-15 November 2014, College of Engineering, Pune (COEP).

Randhawa, N S and Yelne, Payal M and Gharami, Kalpataru and Sau, D C and Kumar, Manoj (2014) Recovery of metals from spent nickel-cadmium (Ni-Cd) battery by leaching-electrowining process. In: 18th Int. Conf. on non-ferrous Met. 2014, 11-12 July 2014, Nagpur (India).

0094NF2014 (2014) An improved process for the pyrolysis of depopulated printed circuit boards (PCBs) of e-waste. 0094NF2014.

S

Shakhtshneider, T P and Myz, S A and Nizovskii, A L and Kalinkin, A V and Boldyrev, V V and Alex, T C and Kumar, Rakesh (2014) Effect of the Selected Inorganic Carriers on the Properties of Mechanocomposites with Drugs. Doklady Chemistry, 456(2) (IF-0.3). pp. 98-102.

Shi, D and Sun, L L and Mi, G J and Sheikh, Lubna and Bhattacharya, S and Nayar, S and Webster, T J (2014) Controlling ferrofluid permeability across the blood-brain barrier model. Nanotechnology, 25(7) (IF-3.672).

Sinha, Deependra Kumar and Kumar, A and Kumar, Sanjay (2014) Development of Geopolymer Concrete from Fly Ash and Bottom Ash Mixture. Transactions of the Indian Ceramic Society, 73(2) (IF-0.233). pp. 143-148.

Sinha, Deependra Kumar and Kumar, A and Kumar, Sanjay (2014) Reduction of pollution by using Fly ash, bottom ash and granulated blast furnace slag in geopolymer building materials. Scholars Journal of Engineering and Technology (SJET), 1(3). pp. 177-182.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D (2014) Solvent extraction and separation of zinc and iron from spent pickle liquor. Hydrometallurgy, 147–148 (IF-2.224). pp. 103-111.

Srivastava, Nidhi and Dhal, B and Abhilash and Pandey, B D (2014) Bioreduction of hexavalent chromium by Bacillus cereus isolated from chromite mine overburden soil. Advanced Materials Research, 828. pp. 81-91.

Srivastava, Rajiv Ranjan and Kim, Min-seuk and Lee, Jae-chun and Jha, Manis K and Kim, Byung-Su (2014) Resource recycling of superalloys and hydrometallurgical challenges. Journal of Material Science, 49(14) (IF-2.5). pp. 4671-4686.

Srivastava, V C and Saarivirta, E H and Cui, C and Uhlenwinkel, V and Schulz, A and Mukhopadhyay, N K (2014) Bulk synthesis by spray forming of Al–Cu–Fe and Al–Cu–Fe–Sn alloys containing a quasicrystalline phase. Journal of Alloys and Compounds, 597 (IF-2.407). pp. 258-268.