Items where Division is "Metal Extraction and Forming" and Year is 2011

A

Abhilash, and Prakash, Mayuri and Mehta, K D and Pandey, B D (2011) Microbial Composite in Trivalent Chromium Remediation from Effluents. In: IIIrd International Congress on Nonferrous Metals, 7-9th Sept 2011, Krasnoyarsk,Russia.

Abhilash, and Singh, Nivedita and Mehta, K D and Pandey, B D (2011) Kaolinte Based Microbial Composite in Cr(III) sorption from waste waters. In: National Seminar on Environmental Waste Management in Metallurgical Industries, 15-16th March 2010, ITBHU,Varanasi.

Abhilash, and VenkatRaman, R and Mehta, K D and Pandey, B D (2011) Isolation and growth kinetic studies of novel isolates from Indian Ocean nodules. Indian Journal of Marine Sciences, 40 (5). pp. 648-652.

Abhilash, and Beena, Kumari (2011) Technology Transfer-A Case Study at NML. In: Technology Valorisatioin and Management at ASCI, 30Jan-12Feb2011, Hyderabad.

Abhilash, and Dhal, B and Mehta, K D and Kumar, Vinay and Pandey, B D (2011) Bio-processing for metal extraction, recycling and effluent treatment- an overview. The Banaras Metallurgist, 16 ( ). pp. 109-115.

Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2011) Bioleaching - An Alternate Uranium Ore Processing Technology for India. Energy Proceedia, 7 . pp. 158-162.

Abhilash, and Pandey, B D (2011) Role of ferric ions in bioleaching of uranium from low tenor Indian ore. Canadian Metallurgical Quaterly, 50 (2). pp. 102-112.

Abhilash, and Prakash, M and Mehta, K D and Pandey, B D (2011) Microbial Composite in Trivalent Chromium Remedition from Effluents. In: Proceedings of the Third International Congress on Non-ferrous metals (2011), September 7-9, 2011, Krasnoyarsk, Russia.

Abhilash, and Revati, K and Pandey, B D (2011) Microbial synthesis of iron-based nanomaterials—A review. Bulletin of Material Science, 34 (2). pp. 191-198.

Achimovičová, M and Baláž, Peter and Rečnik, A and Kováč, J and Rečnik, A and Kováč, J and Feldhoff, A and Gock, E (2011) Mechanochemical synthesis of nanocrystalline lead selenide. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Agarwal, Sanjay and Sahu, K K and Godiwalla, K M and Jana, R K (2011) Studies on the Production of Ferro-Silico-Manganese Alloy in Arc Furnace from Polymetallic Sea Nodule. In: XII International Conference on Mineral Processing Technology (MPT-2011), 20-22 October, 2011, Udaipur, India.

Agrawal, A and Kumari, S and Sahu, K K (2011) Studies on solvent extraction of iron(III) as a step for conversion of a waste effluent to a value added product. Journal of Environmental Management, 92 (12). pp. 3105-3111.

Agrawal, A and Pathak, Pankaj and Mishra, D and Sahu, K K (2011) Recovery of metal values from spent nickel-cadmium rechargeable batteries by solvent extraction route. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Agrawal, A and Perween, M and Pramanick, Shubhajit and Sahu, K K (2011) Recovery of copper from PCB leach solution by solvent extraction. In: Proceedings of the XII International Seminar on Mineral Processing Technology (MPT-2011), Oct 20-22, 2011, Udaipur, India.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2011) Anomalous reduction in surface area during mechanical activation of boehmite synthesized by thermal decomposition of gibbsite. Powder Technology, 208 (1). pp. 128-136.

Alex, T C and Sasikumar, C and Kailath, A J and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2011) Analysis of Mechanically Induced Reactivity of Boehmite Using Kinetics of Boehmite to gamma-Al2O3 Transformation. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 42 (3). pp. 592-603.

Ali, Malek and Basu, Projjal (2011) Synthesis of nanostructured titanium carbide from titanium oxide and Ferro-titanium through mechanical activation. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Aman, Noor and Mishra, T and Hait, Jhumki and Jana, R K (2011) Simultaneous photoreductive removal of copper (II) and selenium (IV) under visible light over spherical binary oxide photocatalyst. Journal of Hazardous Materials, 186 (12). pp. 360-366.

Anand, Kshitiz and Malathi, M (2011) Mathematical Modelling of Heat Transfer and Solidification during continuous Casting of Steel. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

B

Baláž, Peter and Dutková, Erika (2011) Applied mechanochemistry of solids (a review). In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Bara, Nikhil Anurag and Agarwal, Sanjay (2011) Study the overall aspects of Electric Arc Furnace operation. Training Report (TR). CSIR-NML, Jamshedpur.

Besterci, Michal and Sülleiová, Katarína and Velgosová, Oksana (2011) Mechanical alloying of Al-C system. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Bhattacharya, Madhusmita (2011) Isolation and purification of bacteria from bauxite and iron ore mine samples. Masters thesis, National Metallurgical Laboratory (NML).

Biswas, Somjeet and Singh, Satyaveer D and Suwas, Satyam (2011) Microstructure and texture evolution of Pure magnesium during ecae. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Brahma, P and Dutta, S (2011) Novel transport properties of nanostructured α-Fe2O3. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

C

Chaira, D and Mishra, B K and Sangal, S (2011) Synthesis and characterization of nanocrystalline carbides By reaction milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chakraborty, M (2011) Chemical Synthesis and Characterization of Nickel Powder. Metallurgical and materials transactions B-Process metallurgy and materials processing science, 42 (2). pp. 380-384.

Chatterjee, Anjan K (2011) Enhancing the potential of industrial use of the Indian fly ashes through echano-chemical activation – prospects and problems. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chaubey, A K and Mishra, B K and Mukhopadhyay, N K and Mukherjee, P S (2011) Effect of compact density and preheating temperature of the Al-Ti-C Preform on the fabrication of in-situ Mg–TiC composites. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chauhan, Sandeep Kumar and Soni, P R (2011) Development of 2024 p/m aluminium alloy–SiCp nanocomposites via mechanical alloying. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Chi, Tran D and Lee, Jae-chun and Pandey, B D and Jeong, Jinki and Yoo, Kyoungkeun and Huyunh, Trung Hai (2011) Bacterial Cyanide Generation in Presence of Metal Ions (Na+, Mg2+, Fe2+, Pb2+) and Gold Bioleaching from Waste PCBs. Journal of Chemical Engineering of Japan, 44(10) (0.442 (SCI)). pp. 692-700.

Chi, Tran D and Lee, Jae-chun and Pandey, B D and Yoo, Kyoungkeun and Jeong, Jinki (2011) Bioleaching of gold and copper from waste mobile phone PCBs by using a cyanogenic bacterium. Minerals Engineering, 24 . pp. 1219-1222.

Csőke, B and Mucsi, G and Sík, Cs (2011) Production and practical application of mechanically activated fly ash-based binding material. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

D

Das, Suchandan K and Kumari, Amrita and Bandopadhay, D and Akbar, S A and Mandal, G K (2011) A mathematical model to characterise effects of liquid hold-up on bosh silicon transport in the dripping zone of a blast furna. Applied Mathematical Modelling, 35 . pp. 4208-4221.

Das, Suchandan K and Kumari, Amrita and Bandyopadhyay, D and Akbar, S A and Mandal, G K (2011) A mathematical model to characterise effects of liquid hold-up on bosh silicon transport in the dripping zone of a blast furnace. Applied Mathematical Modelling, 35 . pp. 4208-4221.

Deshmukh, Rajesh D and Humane, M M (2011) XRD Analysis of Cold Rolled and Annealed High Strength-Formable Steel Sheets. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Dhal, B and Das, N N and Pandey, B D and Thatoi, Hruayanath (2011) Environmental Quality of the Boula-Nuasahi Chromite Mine Area in India. Mine Water and the Environment, 30 (3). pp. 191-196.

Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2011) Bioremediation of CR(VI) from Contaminated Chromite Mine Overburden Soil and its Management. In: 15th International Conference on Nonferrous Metals 2011, 8-9 July 2011, Kolkata,India.

Dhal, B and Mehta, K D and Das, N N and Thatoi, Hruayanath and Pandey, B D (2011) Native fungal isolates for biosorption of Cr(VI): A potential approach for treatment of chromite mine drainage. In: Proceedings of National Seminar on Environmental Management in Metallurgical Industries (EMMI-2010). Allied Publishers Pvt. LtD, BHU Var, pp. 67-71. ISBN 978-81-8424-728-2

E

Elena , V. Boldyreva (2011) Mechanochemistry of organic solids: where are we now? In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

F

Fabián, Martin and Baláž, Peter and Briančin, Jaroslav (2011) Study of the silver ions cementation after mechanical activation of cementator. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Foct, Jacques (2011) Specifics of mechanically driven atomic distributions In interstitial alloys. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Friščić, T and Jones, W (2011) Development of liquid-assisted grinding (LAG) for the synthesis of hydrogen-bonded and coordination frameworks. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

G

Gangopadhyay, A K and Sahoo, K L and Kelton, K F (2011) Importance of solute-solute interactions on glass formability. Philosophical Magazine, 91 (17). pp. 2186-2199.

Gazder, Azdiar A and Florian, H Dalla Torre and Christopher, H J Davies and Pereloma, Elena V (2011) The microstructure, texture and mechanical properties of AS-ECAE Interstitial-free steel and copper. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ghorai, Tanmay K and Pramanik, Panchanan (2011) Mechanochemical synthesis, characterization and photocatalytic Properties of M2O3/TiO2 (M = Fe, Mn) nano-composite under visible light. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ghosh, M and Kar, Abhijit and Kumar, K and Kailas, S V and Das, S K and Ray, Ajoy K (2011) Evaluation of interface microstructure for friction stir welded aluminium-stainless steel plate. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Goudar, D M and Rudrakshi, G B and Srivastava, V C (2011) Microstructures and Mechanical properties of Spray deposited and Heat-treated Al-25Mg2Si-2Cu alloy. Innovative Systems Design and Engineering, 2 (6). pp. 72-85.

Goudar, D M and Rudrakshi, G B and Srivastava, V C and Reddy, J and Joshi, A G (2011) Spray Deposition Process of Hypereutectic Al – Si alloys: An overview. International Journal of Scientific and Engineering Research, ISSN 2229-5518, 2 (6). pp. 1-10.

Grosdidier, T and Ji, G and Llorca, N (2011) On the processing of dense hetero-nanostructured metallic materials for improved strength / ductility balance by ecae and sps methods. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, CSIR-NML, Jamshedpur.

Gurevich , B I and Kalinkin, A M and Kalinkina, E V and Kalinnikov, V T (2011) Utilization of ferrous-magnesium slag for production of binding materials. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

H

Hansdah, Kirtal (2011) Optimisation of parameters for biosorption of trivalent chromium from model tannery effluent using penicillium species. Masters thesis, National Metallurgical Laboratory (NML).

Hoang, L L and Jeong, Jinki and Lee, Jae-chun and Pandey, B D and Yoo, Jae-Min and Trung, H H (2011) Hydrometallurgical Process for Copper Recovery from Waste Printed Circuit Boards (PCBs). Mineral Processing and Extractive Metallurgy Review, 32 (2). pp. 90-104.

Humane, M M and Minj, R K and Peshwe, D R and Paretkar, R K (2011) Texture and Formability of One-Step and Two-Step Cold-Rolled and Annealed Interstitial Free High-Strength Steel Sheets. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 42A (6). pp. 1692-1708.

Hussain, Zuhailawati and Yusoff, Mahani (2011) In-situ formation of NbC in mechanically alloyed Cu-Nb-C At different temperatures. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

J

Jha, Manis K and Choubey, Pankaj K and Kumari, Archana and Kumar, Rakesh and Kumar, Vinay and Lee, Jae-chun (2011) Leaching of lead from solder material used in electrical and electronic equipment. In: Proceedings of second symposium on Recycling of waste II, 2011, Recycling of waste II.

Jha, Manis K and Kumar, Abhishek and Kumar, Vinay and Lee, Jae-chun (2011) Prospective scenario of e-waste recycling in India. In: Proceeding of Second Symposium On Recycling of Electronic Waste II, 2011, Recycling of waste II.

Jha, Manis K and Lee, Jae-chun and Kumari, Archana and Choubey, Pankaj K and Kumar, Vinay and Jeong, Jinki (2011) Pressure leaching of metals from waste Printed Circuit Boards using sulphuric acid. Journal of Metals, 63 (8). pp. 29-32.

K

Kalinkin, A K (2011) Mechanosorption of Co2 by silicates: mechanism, kinetics and possible applications. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kalinnikov, V T and Krasheninnikov, O N and Belogurova, T P (2011) Mining waste utilization in the production of building materials. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kaloshkin, S D and Ergin, K S and Tcherdyntsev, V V and Maksimkin, A V and Petrzhik, M I and Antipov, E M and Gerasin, V A (2011) Structure and propertties of ball milled utrahigh-molecular weight Polyethylene - clay composite. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kaloshkina, Sergey and Romankov, Sergey and Komarov, Sergey and Kaevitser, Ekaterina (2011) Intermetallic coatings produced by mechanical alloying method. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ketegenov, T and Urakaev, F (2011) Influence of thickness of coated layer on parameters and kinetics of mechanical activation (example of quartz processing). In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kim, Eun-young and Kim, Min-seuk and Lee, Jae-chun and Jeong, Jinki and Pandey, B D (2011) Leaching kinetics of copper from waste printed circuit boards by electro-generated chlorine in HCl solution. Hydrometallurgy, 107 (3-4). pp. 124-132.

Kim, Eun-young and Kim, Min-seuk and Lee, Jae-chun and Pandey, B D (2011) Selective recovery of gold from waste mobile phone PCBs by hydrometallurgical process. Journal of Hazardous Materials, 198 . pp. 206-215.

Kishore, Braj and Jha, Manis K and Kumar, Vinay (2011) Recovery of Nd from Nd-Fe-B magnet scrap of computer Hard Disk Drive. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Konstanchuk, I and Gerasimov, K and Bobet, J -L (2011) Mechanically alloyed magnesium-based materials For hydrogen storage. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kosenko, N and Vinogradova, L and Filatova, N and Smirnova, M (2011) The mechanical treatment as a method of Inorganic substances passive. In: International Conference on Mechanochemistry and Mechanical Alloying, 1-4 December 2008, CSIR-NML, Jamshedpur.

Kulikova, M P and Kaminskii, Yu D (2011) Influence of mechanical activation on alkylation and extractability of coal. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kumar, Manoj and Awasthi, R and Pramanick, A K and Singh, R N (2011) New ternary mixed oxides of Fe, Ni and Mo for enhanced oxygen evolution. International Journal of Hydrogen Energy, 36 (20). pp. 12698-12705.

Kumar, Manoj and Yoo, Kyoungkeun and Kim, Min-seuk and Jeong, Jinki and Lee, Jae-chun (2011) Leaching of metals from waste printed circuit boards(PCBS) by sulphuric acid in the presence of hydrogen peroxide and nitric acid. The Banaras Metallurgist, 16 . pp. 141-148.

Kumar, Raj and Jha, Manis K and Kumar, Vinay (2011) Solvent Extraction of Cu/Li from the Leach Liquor of Spent Batteries of used Electronic devices. Training Report (TR). National Metallurgical Laboratory, Jamshedpur. (Unpublished)

Kumar, Raj and Kumar, Vinay and Jha, Manis K (2011) Solvent Extraction of Cu/Li from the Leach Liquor of Spent Batteries of used Electronic devices. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Kumar, Rakesh and Kumar, Sanjay and Mehrotra, S P (2011) Mechanical activation in blended cement processing. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kumar, Sanjay and Kumar, Rakesh (2011) Mechanical activation of fly ash: Effect on reaction, structure and properties of resulting geopolymer. Ceramics International, 37 (2). pp. 533-541.

Kumar, Sanjay and Kumar, Rakesh and Mehrotra, S P (2011) Geopolymers, fly ash reactivity and mechanical activation. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Kumar, Vinay and Hosmani, Santosh S (2011) The effect of temperature and cooling-rate on packcarburized iron. Journal of Metallurgy and Materials Science, 53 (4). pp. 393-404.

Kumari, Anita and Jana, R K (2011) Comparison of Leaching Rates of Metals in Presence of Different Buffering Agents in Sodium Chloride Media. International Journal of Chemical Engineering Research, 3 (3). pp. 171-179.

Kumari, Anita and Jana, R K (2011) Kinetic Study on Extraction of Valuable Metals in Sodium Chloride Solution with Organic Acid Addition. International Journal of Chemical Engineering Research, 3 (2). pp. 97-105.

Kumari, Manorama (2011) Studies on isolation of micro-organisms from soil sample and their tolerance with metal ions. Masters thesis, National Metallurgical Laboratory (NML).

Kushwaha, Jyoti and Agrawal, A and Upadhyay, A K and Mankhand, T R and Sahu, K K (2011) Recovery of Molybdenum from Spent HDs Catalyst Leach Liquor by Solvent Extraction using Aliquat 336. In: 15th International Conference on Non-ferrous Metals 2011, 8-9 July 2011, Kolkata, India.

L

Lee, Jae-chun and Kim, Eun-young and Kim, Ji-Hye and Kim, Wonbaek and Kim, Byung-Soo and Pandey, B D (2011) Recycling of WC–Co hardmetal sludge by a new hydrometallurgical route. International Journal of Refractory Metals and Hard Materials, 29 (3). pp. 365-371.

Lee, Jin-Young and Jha, Amrita Kumari and Kumari, Archana and Kumar, J Rajesh and Jha, Manis K and Kumar, Vinay (2011) Neodymium recovery by precipitation from synthetic leach liquor of concentrated rare earth mineral. Journal of Metallurgy and Materials Science, 53 (4). pp. 349-354.

Lee, Kwang Seok (2011) Recovery of rare earth metal neodymium (Nd) as value added product from scrap hard disc of personal computer (PC). Masters thesis, Korea Maritime University, South Korea.

Linol, Julie and Martinetto, Pauline and Anne, Michel and Coquerel, Gérard (2011) On the existence of a dynamic critical point by using wet milling on (±) modafinil. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

M

Maity, S K and Kawalla, R (2011) Ultrahigh Strength Steel: Development of Mechanical Properties Through Controlled Cooling. In: Heat Transfer - Engineering Applications. InTech , Croatia, pp. 309-336. ISBN 978-953-307-361-3

Mandal, G K and Das, Suchandan K and Balasubramaniam, R and Mehrotra, S P (2011) Evolution of microstructures of galvanised and galvannealed coatings formed in 0.2 wt-% aluminium–zinc bath. Materials Science and Technology, 27 (8 ). pp. 1265-1270.

Meena, Harikesh and Hembram, Khelaram and Singh, S D (2011) Study Of Metal Extraction and Forming. Training Report (TR). National Metallurgical Laboratory, Jamshedpur, Jamshedpur.

Mehta, K D and Kumar, Rakesh and Pandey, B D and Mehrotra, S P (2011) Bio-dissolution of metals from activated nodules of Indian Ocean. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mishra, D and Perumal, A and Srinivasan, A (2011) Composition dependent properties of mechanically alloyed amorphous Fe-Zr-B powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mishra, D and Srivastava, R R and Sahu, K K and Singh, T B and Jana, R K (2011) Leaching of roast-reduced manganese nodules in NH3 – (NH4)2CO3 medium. Hydrometallurgy, 109 (3-4). pp. 215-220.

Mondal, B N and Basumallick, A and Chattopadhyay, P P (2011) The magnetic behavior of Cu-Ni-Co-Fe quaternary alloys prepared by Mechanical alloying. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mukherjee, K and Prakash, S (2011) Cold Simulation of momentum transfer of a metal droplet falling through slag systems possessing net-work structured fluids. Chemical Engineering Science, 66 (6). pp. 1027-1037.

Mukhopadhyay, N K (2011) Synthesis of nanocrystalline and amorphous phases in complex metallic alloys during mechanical milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Mulas, G and Delogu, Francesco (2011) Estimation of mechanochemical effects in heterogeneous processes. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

N

Narasimhan, B R V and Satendra, Kumar and Sankara Narayanan, T S N (2011) Synthesis of manganese zinc ferrite using ferrous pickle liquor and pyrolusite ore. Environmental Chemistry Letters, 9 (2). pp. 243-250.

Nath, S K (2011) Effect of Mechanical Activation on Synthesis and Properties of Cordierite (2MgO.2Al2O3.5SiO2). Exploratory (OLP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

P

Padmanabhan, K A and Prabu, S Balasivanandha (2011) Ultrafine grained materials through mechanical processing: An assessment. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Pal, J and Ghorai, S and Goswami, M C and Bandyopadhyay, D and Ghosh, S (2011) Agglomeration of Waste Iron-oxide for use in Steel Making. Steel Tech, 6 (1). pp. 1-6.

Pal, J and Ghorai, S and Singh, D P and Goswami, M C and Bandopadhyay, D and Ghosh, Dinabandhu (2011) Dissolution Characteristics of CO2-Treated Fluxed Pellets in Hot Metal Bath. Mineral Processing and Extractive Metallurgy Review , 32 (4). pp. 229-246.

Palaniandy, Samayamutthirian and Azizli, Khairun Azizi Mohd and Hussin, Hashim and Hashim, Syed Fuad Saiyid (2011) Changes in the structure of talc by continuous jet milling in relation to imposed specific kinetic energy. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Pandey, B D (2011) Rare Metals Extraction from Non-ferrous Resources in India: Present Status and Prospects of R&D. In: 15th International Conference on Non-ferrous Metals 2011, 8-9 July 2011, Kolkata, India.

Council of Scientific & Industrial Research (2011) Process for recovery of copper and nickel powders from high iron containing waste or secondary resourc. IN200902504-I1.

Park, Hong Ki (2011) Extraction of cobalt and lithium from waste lithium ion batteries of mobile phones. Masters thesis, Korea Maritime University, South Korea.

Prasad , Sanjay (2011) Extraction of chromium as Sodium Chromate from Stainless Steel Dust. The Journal of Solid Waste Technology and Management, 37 (1). pp. 40-46.

R

Raman, R Venkat and Abhilash, (2011) Isolation and biochemical characterisation of marine bacterial species from indian ocean nodules. Training Report (TR). NML, Jamshedpur.

Randhawa, N S and Jana, R K and Das, N N (2011) Manganese Nodules Residue: Potential Raw Material for Fesimn Production. In: 15th International Conference on Non-ferrous Metals 2011, 8-9 July 2011, Kolkata, India.

Randhawa, N S and Jana, R K and Das, N N (2011) Removal of Cd(II) Ions from Aqueous Solution by Adsorption Using Manganese Nodules Leaching Residue. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur.

Randhawa, N S and Mishra, D and Jana, R K (2011) Smelting of leached sea nodule residue blended with manganese ore for revovery of manganese. The Banaras Metallurgist, 16 . pp. 117-121.

Ranganathan, S and Godiwalla, K M (2011) Influence of process parameters on reduction contours during production of ferrochromium in submerged arc furnace. Canadian Metallurgical Quarterly , 50 (1). pp. 37-44.

Ranganathan, S and Godiwalla, K M and Chakraborty, D (2011) Investigation of the kinetics of reduction of chromite ore lumps with large particles of coke. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 120 (2). pp. 71-78.

Ranganathan, S and Godiwalla , K M and Satyanarayana, N V (2011) Simulation of Ferrochrome Production in Submerged Arc Furnaces for Optimisation of Specific Energy Consumption. Steel Tech, 5 (3). pp. 25-40.

Rudrakshi, G B and Reddy, G J and Goudar, D M and Vagmode, J and Srivastava, V C (2011) Microstructural and Hardness of Spray Deposited Al-30Mg 2 Si-2Cu Alloy in Solutionized and Aged Conditions. In: World Congress on Engineering and Technology, October 28 - November 02, 2011, Sanghai, China.

S

Sahu, J K and Sahu, K K and Ray, Ashok K (2011) The influence of high-temperature oxidation resistant titanium aluminide coating on low-cycle fatigue behaviour of titanium alloy IMI 834 at 600°C. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, October 31, 2011 1464420711425133, 226 (L1). pp. 34-41.

Sahu, S K and Asselin, E (2011) Characterization of chalcopyrite leach residues produced during medium temperature leaching of chalcopyrite. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur.

Sahu, S K and Asselin, E (2011) Characterization of residue generated during medium temperature leaching of chalcopyrite concentrate under CESL conditions. Hydrometallurgy, 110 (1-4). pp. 107-114.

Sahu, S K and Sinha, Manish K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2011) Solvent Extraction of Copper and Zinc From a Pickling Solution Using Versatic 10 Acid, Cyanex 272 and LIX 984N. In: International Congress & Exhibition, Non-Ferrous Metals-2011, September 7-9, 2011, Krasnoyarsk, Russia.

Samal, S and Chaira, D and Chaira, B (2011) Production and stability of al and cu ultrafine particles in nanofluids. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Sasikumar, C and Srikanth, S and Kumar, Rakesh and Alex, T C and Mehrotra, S P (2011) Where does the energy go in high energy milling? In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Satapathy, P K and Randhawa, N S and Das, N N (2011) Oxidative decolorization of methylene blue by leached sea-nodule residues generated by the reductionroasting ammoniacal leaching process. Environmental Technology . pp. 1-8.

Sau, D C and Biswal, K C (2011) Computational fluid dynamics and experimental study of the hydrodynamics of a gas–solid tapered fluidized bed. Applied Mathematical Modelling, 35 (5). pp. 2265-2278.

Sau, D C and Sengupta, Rajarshi and Bandopadhyay, D (2011) Development of Model for the Estimation of Coke Bed Voidage and the Liquid levels in the Blast Furnace Hearth. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Sepelak, V and Bergmann, I and Indris, S and Heitjans, P and Becker, K D (2011) Crystallite size dependent cation distribution in nanostructured spinels studied by nmr, mössbauer spectroscopy and XPS. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Shakhtshneider, T P and Myz, S A and Dyakonova, M A and Boldyrev, V V and Nizovskii, A L and Kalinkin, A V and Kumar, Rakesh (2011) Mechanochemical Preparation of Organic-Inorganic Hybrid Materials of Drugs with Inorganic Oxides. Acta Physica Plolonica, 120 (2). pp. 272-278.

Shakhtshneider, T P and Myz, S A and Mikhailenko, M A and Dyakonova, M A and Boldyrev, V V (2011) Mechanochemistry and solubilization of drugs. In: International Conference on Mechanochemistry and Mechanical Alloying, 1-4 December 2008, CSIR-NML, Jamshedpur.

Singh, Rajesh Kumar (2011) Inhibition of the corrosion of mild steel in the pulp and paper industry. Journal of Metallurgy and Materials Science, 53 (4). pp. 411-418.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2011) Processing of a Waste Stream for Separation and Recovery of Copper and Zinc. In: International Conference on Mineral Processing Technology (MPT – 2011), 20-22 Oct 2011, Udiapur.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2011) Solvent extraction and separation of copper and zinc from a pickling solution. In: 15th International Conference on Nonferrous Metals 2011, 7-8 July 2011, Kolkata,India.

Sinha, Prayag and Jha, Manis K (2011) Solvent Extraction of Copper from Synthetic Solution of PCB Leach Liquor using LIX984N. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Srivastava, V C and Singh, Mirtunjay and Kumar, Tipu and Sahoo, K L (2011) Effect of Al-alloy composition and foaming temperature on pore size, density and mechanical properties. In: International Conference on Porous Metals and Metallic Foams (MetFoam-2012), September 18-21, 2011, Busan, Korea.

Surkov, G and Golovko, A K and Lomovsky, O I and Lobanov, J S (2011) Mechanochemical conversion of acetylene in quartz – ultrafine metal powder system. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

T

Tcherdyntsev, V V and Kaloshkin, S D and Sudarchikov, V A and Dorofeev, A A and Mochkina, I V and Yuryeva, N V and Danilov, V D (2011) Ball milling effect on the properties of ultra high molecular weight Polyethylene - bronze composite. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Tcherdyntsev, V V and Shevchukov, A P and Sviridova, T A and Kaloshkin, S D (2011) Phase transformations in mechanically alloyed Al-Cu-Cr powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Tcherdyntsev, V V and Titova, V Yu and Kaloshkin, S D and Baldokhin, Yu V and Zagainov, A V and Rodin, A O (2011) Structure and magnetic properties of mechanically alloyed Fe3-xAlCrx powders. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Teremova, M I and Petrakovskaya, E A and Romanchenko, A S and Tuzikov, F V and Gurevich, Yu L and Tsibina, O V and Yakubailik, E K and Abhilash, (2011) Iron-based ultrafine particles made in mode solutions and industrial waste waters. In: The thrid International Congress on Non-Ferrous Metals, September 7-9, 2011, Hrasnoyarsk, Russia.

Thirugnanam, A and Chakravarthi, N. Veera and Chakkingal, Uday and Kumar, T S Sampath (2011) Novel titanium - hydroxyapatite biocomposites By mechanical milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME2008), 1-4 December, 2008, CSIR-NML, Jamshedpur.

Tripathi, Abhishek and Kumar, Manoj and Agrawal, A and Sau, D C and Chakravarty, S and Mankhand, T R (2011) Leaching of Gold from the Waste Mobile Phone Printed Circuit Boards (PCBS) with Ammonium Thiosulphate. In: 15th International Conference on Nonferrous Metals 2011, 8-9 July 2011, Kolkata,India.

Turianicová, Erika and Baláž, Peter (2011) A possible way to storage carbon dioxide on mechanically activated olivine (Mg,Fe)2SiO4. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

U

Upadhyay, Divyesh (2011) Microstructural analysis of 7075-Aluminium alloy. Training Report (TR). National Metallurgy Laboratory, Jamshedpur. (Submitted)

V

Vaish, A K and Singh, S D (2011) Development of Eco-friendly process for the recovery of Lead from lead battery scrap in small scale sector. The Banaras Metallurgist, 16 ( ). pp. 149-157.

W

Welham, N J and Setoudeh, N (2011) Increasing gas sorption onto carbon by milling with alumina. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Y

Yadav, T P and Mukhopadhyay, N K and Tiwari, R S and Srivastava, O N (2011) Mechanically induced phase transformation in Al-Cu- Fe-Cr decagonal Quasicrystalline alloy by high-energy ball milling. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Yariv, S and Lapides, I and Abramova, E (2011) Mechanochemical reactions of clay minerals with CsCl. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.