Items where Division is "Metal Extraction and Forming" and Year is 2008

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 97.

Article

Agrawal, A and Bagchi, D and Kumari, S and Kumar , Vinay and Pandey, B D (2008) Hydrogen reduction of bleed stream of an Indian copper industry to produce nickel powder. Materials Letters, 62 (17-18). pp. 2880-2882.

Agrawal, A and Kumari, S and Sahu, K K (2008) Liquid–liquid extraction of sulphuric acid from zinc bleed stream. Hydrometallurgy, 92 (1-2). pp. 42-47.

Agrawal, A and Manoj, M K and Kumari, S and Bagchi, D and Kumar, Vinay and Pandey, B D (2008) Extractive separation of copper and nickel from copper bleed stream by solvent extraction route. Minerals Engineering, 21 (15). pp. 1126-1130.

Agrawal, A and Pal, C and Sahu, K K (2008) Extractive removal of chromium (VI) from industrial waste solution. Journal of Hazardous Materials, 159 (2-3). pp. 458-464.

Alex, T C and Kumar, Rakesh and Roy, S K and Mehrotra, S P (2008) Stirred bead mill grinding of gibbsite: Surface and morphological changes. Advanced Powder Technology, 19 (5). pp. 483-491.

Chatterjee, S and Bandopadhyay, A and Datta, A K and Kumar, S and Sengupta, B (2008) Technologies for Mitigation of Arsenic from Ground Water. Low Cost Technology for In-Situ Treatment of Groundwater . pp. 31-53.

Chatterjee, S and Bandopadhyay, A and Sengupta, Bhaskar (2008) Arsenic Contamination of Ground Water. Low Cost Technology for In-Situ Treatment of Groundwater . pp. 1-19.

Das, Suchandan K and Hedge, Shubha S and Godiwalla, K M and Mehrotra, S P and Dey, P K (2008) A probabilistic model to characterize erosion-oxidation damage on boiler grade steel impacted by solid particle. Journal Of Tribology-Transactions Of The Asme , 130 (4). 041601.

Dey, K C and Sharma, V (2008) Copper (II) substituted heteropoly molybdate and tungstate of the keggin type anion [Xn+M12O40]-(8-n) : Their synthesis and characterization. Journal of Metallurgy and Materials Science, 50 (1). pp. 53-56.

Ghosh Chowdhury, S and Kumar, P and Das, Arpan and Das, Swapan K and Mahato, B and De, P K (2008) Evolution of grain-boundary character distribution during iterative processing of an austenitic stainless steel. Philosophical Magazine Letters Online ISSN 1362-3036, 88 (6). pp. 407-414.

Ghosh Chowdhury, S and Mahato, B and Da silva, H R and Lourenco, G G and Santos, D B (2008) Evolution of texture in ultra-fine grained ferrite through warm-rolling and intercritical annealing. Nanomaterials By Severe Plastic Deformation Iv, Pts 1 And 2 Book Series: Materials Science Forum , 584-586 (1-2). pp. 610-616.

Jha, Manis K and Upadhyay, R R and Lee, Jae-chun and Kumar, Vinay (2008) Treatment of rayon waste effluent for the removal of Zn and Ca using Indion BSR resin. Desalination, 228 (1-3). pp. 97-107.

Jindal, Vikas and Srivastava, V C and Ghosh, R N (2008) Development of IF steel–Al multilayer composite by repetitive roll bonding and annealing process. Materials Science and Technology, 24 (7). pp. 798-802.

Kumar, Randhir and Poddar, Palash and Pushp, P T and Sahoo, K L (2008) Strain Induced Melt Activation (SIMA) - A New Challenging Manufacturing Process for Automotive Applications. Indian Foundry Journal, 54(3) . pp. 35-39.

Kumar, Sanjay and Kumar, Rakesh and Bandopadhyay, A and Alex, T C and Ravi Kumar, B and Das, Swapan K and Mehrotra, S P (2008) Mechanical activation of granulated blast furnace slag and its effect on the properties and structure of portland slag cement. Cement and Concrete Composites, 30 (8). pp. 679-685.

Maity, S K and Ballal, N B and Goldhahn, G and Kawalla, R (2008) Development of low alloy titanium and niobium microalloyed ultrahigh strength steel through electroslag refining. Ironmaking & Steelmaking, 35 (5). pp. 379-386.

Maity, S K and Ballal, N B and Goldhahn, G and Kawalla, R (2008) Development of low alloy ultrahigh strength steel. Ironmaking & Steelmaking, 35 (3). pp. 228-240.

Mandal, D and Dutta, B K and Panigrahi, S C (2008) Effect of copper and nickel coating on short steel fiber reinforcement on microstructure and mechanical properties of aluminium matrix composites. Materials Science and Engineering A, 492 (1-2). pp. 346-352.

Mandal, D and Dutta, B K and Panigrahi, S C (2008) Effect of wt% reinforcement on microstructure and mechanical properties of Al-2Mg base short steel fiber composites. Journal of Materials Processing Technology, 198 (1-3). pp. 195-201.

Mandal, D and Dutta, B K and Panigrahi, S C (2008) Wear properties of copper-coated short steel fiber reinforced stir cast Al–2Mg alloy composites. Wear, 265 (5-6). pp. 930-939.

Manoharan, S S and Singh, Brajendra and Sahu, Ranjan K and Zimmer, A and Lim, S -H and Salamanca-Riba, L G and Chandrasekar, V (2008) Effect of Ru-Mn redox interactions on the hole carrier density in pulsed electron deposited La1-xPbxMn0.8Ru0.2O3 (0.2 <= x <= 0.4) thin films. Journal Of Physics-Condensed Matter, 20 (23). p. 235205.

Mishra, D and Kanari, N and Sahu, K K and Gaballah, I (2008) Recovery of zinc and lead from electric arc furnace dusts through the oxy – chlorination route. Metal Materials & Processes, 20 (2). pp. 161-172.

Pal, J and Bandopadhyay, D and Singh, D P and Ghosh, Sukomal (2008) A comparative study for smelting of chromite ore, pellets, briquettes and sinter. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 117 (3). pp. 129-136.

Radiguet, B and Blavette, D and Wanderka, N and Banhart, J and Sahoo, K L (2008) Segregation-controlled nanocrystallization in an Al–Ni–La metallic glass. Applied Physics Letters, 92 . 103126-1-103126-3.

Raj, V and Ali, M Mubarak (2008) Nickel coated aluminium electrode - A sensor for the voltammetric analysis of crystal violet. Journal of Metallurgy and Materials Science, 50 (4). pp. 183-193.

Rajagopal, G and Periasamy, V M (2008) Chemical vapor deposition of copper using argon as carrier gas. Journal of Metallurgy and Materials Science, 50 (3). pp. 175-181.

Sahay, S K (2008) Spinodal decomposition in Co-3 Ti(wt.%) alloy. Spinodal decomposition in Co-3 Ti (wt. %) alloy, 50 (1). pp. 33-43.

Sahoo, K L and Sahu, Rina and Ghosh, M and Chatterjee, S (2008) Studies on crystallization behaviour and mechanical properties of Al-Ni-La metallic glasses. Bulletin of Materials Science, 31 (3). pp. 433-439.

Sahu, K K and Agrawal, A (2008) Environmental friendly recycling of electronic waste – A challenge before developing nations. Journal of Metallurgy and Materials Science, 50 (2). pp. 107-118.

Sahu, S K and Verma, V K and Bagchi, D and Kumar, Vinay and Pandey, B D (2008) Recovery of chromium(VI) from electroplating effluent by solvent extraction with tri-n-butyl phosphate. Indian Journal Of Chemical Technology, 15 (4). pp. 397-402.

Sau, D C and Mohanty, Swati and Biswal, K C (2008) Critical fluidization velocities and maximum bed pressure drops of homogeneous binary mixture of irregular particles in gas–solid tapered fluidized beds. Powder Technology, 186 (3). pp. 241-246.

Sau, D C and Mohanty, Swati and Biswal, K C (2008) Minimum fluidization velocity at elevated temperature in tapered fluidized bed. Chemical Engineering and Processing: Process Intensification, 47 (2008). pp. 2391-2394.

Singh, Raghuvir and Ghosh Chowdhury, S and Tiwari, S K and Dahotre, N B (2008) Laser surface processing of Ti6Al4V in gaseous nitrogen: corrosion performance in physiological solution. Journal of Materials Science: Materials in Medicine, 19 (3). pp. 1363-1369.

Srinivasan, A and Swaminathan, J and Pillai, U T S and Guguloth, K and Pal, B C (2008) Effect of combined addition of Si and Sb on the microstructure and creep properties of AZ91 magnesium alloy. Materials Science and Engineering A, 485 (1-2). pp. 86-91.

Srivastava, V C and Jindal, Vikas and Uhlenwinkel, V and Bauckhage, K (2008) Hot-deformation behaviour of spray-formed 2014 Al + SiCP metal matrix composites. Materials Science and Engineering A, 477 (1-2). pp. 86-95.

Srivastava, V C and Uhlenwinkel, V and Schulz, A and Zoch, H -W and Mukhopadhyay, N K and Ghosh Chowdhury, S (2008) Synthesis of single phase i-AlCuFe bulk quasicrystal by spray forming. Zeitschirft fuer Kristallographie, 223 . pp. 711-715.

Umadevi, G and Ponnusamy, V (2008) Effects of DC voltages using HCI, H2SO4 acids on polyaniline synthesised electrochemically. Journal of Metallurgy and Materials Science, 50 (1). pp. 45-52.

Vaish, A K and Minj, R K and Gupta, R N and Konar, J (2008) Kinetics and mechanism of multi-metallic magnetite ore reduction from liquid slags by solid carbon and carbon-saturated iron. Journal of Metallurgy and Materials Science, 50 (2). pp. 65-83.

Book or NML Publication

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Mineral Processing and Nonferrous Extractive Metallurgy. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy. National Metallurgical Laboratory, Jamshedpur, Jamshedpur.

Mehta, K D and Abhilash, and Pandey, B D and Anand Ram, S and Mankhand, T R (2008) Improving chalcopyrite biodissolution form low grade Indian copper ore by microbial consortia. In: XIIth International Conference on Nonferrous Metals. Corporate Monitor, Nagpur, Tech.6/1-Tech.6/9.

Conference or Workshop Item

Abhilash, and Mehta, K D and Pandey, B D (2008) Bio-Hydrometallurgy for Extraction of Nonferrous Metals. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Abhilash, and Mehta, K D and Pandey, B D (2008) Effectiveness of bioleaching of low grade Indian chalcopyrite ore using pure and mixed culture of mesophiles. In: Minerals to Materials Conference (M2M-08), 15-18, December, 2008, Cairo, Egypt.

Anand Ram, S and Abhilash, and Mehta, K D and Pandey, B D and Mankhand, T R (2008) Bioleaching of a low grade Indian Chalcopyrite ore by Microbial consortium. In: CTWMI 2008, 13-16 April 2008, Santiago,Chile.

Anand Ram, S and Abhilash, and Mehta, K D and Pandey , B D and Mankhand, T R (2008) Microbial dissolution of a low grade Indian chalcopyrite ore using mixed culture of Mesophiles. In: International Seminar on Mineral Processing Technology (MPT-2008) , April 22-24, 2008, Trivandrum,INDIA.

Bandopadhyay, A (2008) Environmental Issues in Metal Extraction. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Bandopadhyay, A (2008) Environmental Issues in the Processing and Extraction of Non-ferrous Metals. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Bandyopadhyay, D (2008) Kinetic Analysis of Metallurgical Systems. In: Proceedings on Extraction of Nonferrous Metals and their Recycling- A training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Das, Avimanyu (2008) Introduction. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Das, Avimanyu (2008) Value Addition to Ores through Beneficiation. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Classification. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Comminution. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) De-Watering. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Electrostatic Seperation. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Froth Flotation. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Gravity Concentration. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Importance of Mineralogy in Mineral Processing. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Magnetic Separation. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, NML, Jamshedpur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Material Balance, Plant Evaluation and Modeling. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Das, Avimanyu and Singh, Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Principles of Extractive Metallurgy. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Das, Avimanyu and Singh , Ratnakar and Sahu, K K and Abhilash, and Goswami, N G (2008) Agglomeration. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Das, Goutam and Dubey, Paritosh and Das, Mousumi and Paul, K K (2008) In-Situ Measurement of Mechanical Properties using Automated Ball Indentation Technique. In: Training Programme on Special Metal Casting and Forming Processes - (CAFP-2008), Feb. 25-26, 2008, NML, Jamshedpur.

Ghosh, Sukomal (2008) Production Aspects of Spheroidal Graphite Iron. In: Training Programme on Special Metal Casting and Forming Processes -(CAFP - 2008), Feb. 25-26, 2008, NML, Jamshedpur.

Ghosh Chowdhury, S and Rajnikanth, V (2008) Thermomechanical Processing of Metals and Alloys. In: Training Programme on Special Metal Casting and Forming Processes - (CAFP - 2008), Feb. 25-26, 2008, NML, Jamshedpur.

Goel, R P (2008) Thermodynamic Considerations in Metal Extraction. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Jana, R K (2008) NML's Activities on Non-ferrous Metals Extraction. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Jana, R K and Randhawa, N S and Agarwal, Sanjay (2008) Making standard grade FeSiMn alloy by blending of different low grade materials. In: National Metallurgist Day - Annual Technical Meeting (NMD-ATM), 12-15 November 2008, New Delhi.

Jana, R K and Randhawa, N S and Agarwal, Sanjay and Maity, S K and Ghorai, S (2008) Two stage smelting process for recovery of manganese from low manganese bearing material. In: 12th Int. Sem. Nonferrous Metals – 2008, 4-5 July, 2008, Nagpur.

Kumar, Manoj and Kumar, Vinay (2008) Separation Processes-Solvent Extraction/ion Exchange for Metalions. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Kumar, Manoj and Kumar, Vinay (2008) Solvent Extraction/ion Exchange for Metal Separation and Recovery. In: Proceedings on Extraction on Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Kumar , Sanjay and Alex, T C and Kumar, Rakesh (2008) Mechanical Activation of Solids in Extractive Metallurgy. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Mandal, D (2008) Effect of wt% Reinforcement on Mechanical and Wear properties of Al-2mg base Short Copper Coated Steel Fiber Composites. In: Seminar on Growth with Quality Challenges & Opportunities for foundry, January 18-19, 2008, TMDC Auditorium, Jamshedpur.

Mandal, G K and Balasubramaniam , R and Mehrotra, S P (2008) Effect of several process parameters on interfacial aluminum rich layer in galvanized coatings. In: International Seminar on Prospect, Problems and Potential of Coated Steels’ Edited by M. Datta, N. Bandyopadhyay, S. Chakrabarti, S. Chandra and T. Venugopalan, February 14-16, 2008, organized by IIM Jamshedpur chapter and TATA STEEL, Jamshedpur, .

Mandal , D (2008) Near Net Shape Casting through Investment, Die and Centrifugal Casting. In: Training programme on Special Metal Casting and Forming Processes (CAFP-2008), Feb. 25-26, 2008, NML, Jamshedpur.

Mitra, A and Roy, Rajat K and Panda, A K (2008) Bulk Metallic Glasses and Nanostructured Materials. In: Training Programme on Special Metal Casting and Forming Processes - (CAFP-2008), Feb. 25-26, 2008, NML, Jamshedpur.

Palit Sagar, S (2008) Modern Ultrasonic Technique for Defect Detection in Cast Materials. In: Training Programme on Special Metal Casting and Forming Processes-(CAFP-2008), Feb. 25-26, 2008, NML, Jamshedpur.

Poddar, Palash (2008) Principles of Metal Working Processes. In: Training Programme on Special Metal Casting and Forming Processes - (CAFP-2008), Feb. 25-26, 2008, NML, Jamshedpur.

Poddar, Palash (2008) Semi-Solid Casting. In: Training Programme on Special Metal Casting and Forming Process - (CAFP-2008), Feb. 25-26, 2008, NML, Jamshedpur.

Prasad, Sanjay (2008) Recent Development of Zinc powder preparation from zinc containing waste. In: International Conference on recent trends in Materials & Mechanical Engineering, 2008, Pollachi, Tamilnadu.

Prasad, Sanjay (2008) Recovery of Chromium from Stainless Steel dust. In: The 23rd International Conference on Solid Waste Technology and Management, March 30 - April 2, 2008, Philadelphia, U.S.A..

Prasad, Sanjay (2008) Zinc Dross Problem in Galvanising and its use to produce Electrolytic Zinc Powder. In: International Seminar on Coated Steels (ISCS-2008) : Prospect, Problems and Potential of Coated Steels, Feb. 14-16, 2008, Tata Steel, Jamshedpur.

Ranganathan, S (2008) Extraction of Magnesium, Titanium and Aluminium. In: Proceedings on Extraction on Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Sahu, K K and Agarwal, Anup (2008) Recycling of Metals from Secondary Sources Treatment Options. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Sahu, K K and Agrawal, A (2008) Lead Zinc Extraction Processes. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Sahu, K K and Agrawal, A (2008) Processing of Electronic Waste(E-Waste). In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Sahu, S K (2008) Extraction of Base Metals (Copper, Nickel and Cobalt). In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Sahu, S K (2008) Metallurgy of Light Metals. In: Training Course on Mineral Processing and Nonferrous Extractive Metallurgy, June 30 - July 5, 2008, Jamshedepur.

Sahu, S K (2008) Recent Advances in the Extraction of Copper, Nickel and Cobalt. In: Proceedings on Extraction of Nonferrous Metals and their Recycling, Feb. 27-29th, 2008, NML, Jamshedpur.

Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay and Mankhand, T R (2008) Extraction of trivalent chromium from tannery effluent by ion exchange with indion 790 resin. In: International Seminar on Mineral Processing Technology (MPT-2008) , April 22-24, 2008, National Institute for Interdisciplinary Science & Technology, CSIR, Trivandrum.

Sinha, Nidhi and Sahoo, K L (2008) Melting and Casting of Non-ferrous Metals and Alloys. In: Proceedings on Extraction of Nonferrous Metals and their Recycling - A Training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Sinha, Nidhi and Srivastava, V C and Sahoo, K L (2008) Processing and Application of Aluminium Foams. In: Training Programme on Special Metal Casting and Forming Processes - (CAFP - 2008), Feb. 25-26, 2008, NML, Jamshedpur.

Srivastava, V C and Uhlenwinkel, V and Schulz, A and Zoch, H -W and Mukhopadhyay, N K and Ghosh Chowdhury, S (2008) Synthesis of the Single Phase i-AlCuFe Bulk Quasicrystal by Spray Forming. In: Tenth international conference on Quasicrystals (ICQ10), July 7-11, 2008, Zurich, Switzerland.

Tarafder, S (2008) Evaluation of Mechanical Properties and Mechanisms of Deformation and Fracture. In: Training Programme on Special Metal Casting and Forming Processes-(CAFP-2008), Feb. 25-26, 2008, NML, Jamshedpur.

Venkateswarlu, K and Rajnikanth, V and Ray, Ajoy K (2008) High Strength Aluminium Alloys with Emphasis on Scandium Addition. In: Training Programme on Special Metal Casting and Forming Processes - (CAFP-2008), Feb. 25-26, 2008, NML, Jamshedpur.

Patent

US2006000491916 (2008) Process for the production of Portland slag cement using granulated blast furnace slag. US7410537.

US2003000393297 (2008) Process for recovery of gallium. US7338589.

Project Reports

Ansari, Aslam and Abhilash, (2008) Isolation of Microbial Species and Their Applications in Biosorption and Bioleaching. Training Report (TR). NML, Jamshedpur.

Mishra, D and Kumar, Rakesh and Sahu, K K and Agrawal, A (2008) Development of Process for Production of Chemical Manganese Dioxide (OLP-0055). Exploratory (OLP). NML, Jamshedpur. (Submitted)

This list was generated on Thu Mar 28 13:06:41 2024 IST.