Items where Division is "Metal Extraction and Forming" and Year is 2001

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | D | G | J | K | M | P | R | S | T | U | V
Number of items: 35.

A

Agrawal, D P (2001) Prehistoric Copper Technology in India : A Review. In: Metallurgy in India - A Retrospective, November 26, 2000, NML, Jamshedpur.

B

Balasubramaniam, R (2001) New Insights on the Corrosion Resistant Delhi Iron Pillar. In: Metallurgy in India - A Retrospective, November 26, 2000, NML, Jamshedpur.

Bhattamishra, A K and Basu, D K (2001) A comparative study on the performance of inhibitors for protection of recirculating cooling water system. Journal of Metallurgy and materials Science, 43 (2). pp. 141-145.

Biswas, A K (2001) Minerals and their Exploitation in Ancient and Pre-modern India. In: Metallurgy in India - A Retrospective, November 26, 2000, NML, Jamshedpur.

Bodas, M G and Mathur, S B (2001) Treatment of vanadium pentoxide plant effluent by ion exchange process. Transactions of the Indian Institute of Metals, 54 (3). pp. 131-136.

D

Dube, R K (2001) India's Contribution to the Mining, Extraction and Refining of Gold : Some Observations Related to the Pre-Christian Era. In: Metallurgy in India - A Retrospective, November 26, 2000, NML, Jamshedpur.

G

Ghosh, M and Dutta, B K and Basumallick, A and Ghosh, S (2001) Preparation of copper-tin compacts by warm compaction route. Journal of Metallurgy and materials Science, 43 (2). pp. 119-125.

Goswami, M C and Biswas, P K and Vaish, A K (2001) Kinetics of reduction of low grade iron ore by charcoal. Journal of Metallurgy and materials Science, 43 (3). pp. 181-188.

J

Jha, Manis K and Kumar, Vinay and Singh, R J (2001) Review of hydrometallurgical recovery of zinc from industrial wastes. Resources, Conservation and Recycling, 33 (1). pp. 1-22.

K

Kumar, Sanjay and Singh, K K and Ramachandrarao, P (2001) Effects of fly ash additions on the mechanical and other properties of porcelainised stoneware tiles. Journal of Materials Science, 36 (24). pp. 5917-5922.

M

Mahato, D K and Chaudhary, R K and Mohanta, M K and Srivastava, S C (2001) Phase characterisation of PZT type ceramics prepared by spray drying technique. Journal of Metallurgy and Materials Science, 43 (3). pp. 197-202.

Majumdar, Shrabani and Mohanty, O N (2001) Non-oriented electrical steel: An overview. Journal of Metallurgy and materials Science, 43 (2). pp. 43-56.

Murty, B S and Maiti, R and Chakraborty, M (2001) Development of in-situ AI-TiB2 metal matrix composites. Journal of Metallurgy and materials Science, 43 (2). pp. 93-101.

P

Pal, J and Goswami, M C (2001) Simple mathematical models to control silicon, sulphur and manganese in hot metal during blast furnace operation. Journal of Metallurgy and materials Science, 43 (3). pp. 203-211.

Pandey, B D and Kumar, Vinay and Bagchi, D and Jana, R K and Premchand, (2001) Processing of Tungsten Preconcentrate from Low Grade Ore to Recover Metallic Values. Mineral Processing and Extractive Metallurgy Review: An International Journal, 22 (1). pp. 101-120.

Prakash, B (2001) Ferrous Metallurgy in Ancient India. In: Metallurgy in India - A Retrospective, November 26, 2000, NML, Jamshedpur.

Prodhan, A and Sivaramakrishnan, C S and Chakrabarti, A K (2001) Solidification of aluminum in electric field. Metallurgical and Materials Transactions B, 32 (2). pp. 372-378.

R

Ranganathan, S and Godiwalla, K M (2001) Effect of preheat, bed porosity, and charge control on thermal response of submerged arc furnace producing ferrochromium. Ironmaking & Steelmaking, 28 (3). pp. 273-278.

Rao, V V (2001) Preparation and properties of Al2O3/Al in-situ composites by reactive melt penetration. Indian Journal of Engineering and Materials Sciences, 8 (3). pp. 161-164.

Rezai, B and Amini, A and Jorjani, E (2001) The floatation studies on coal fines from Galeran area of Iran. Journal of Metallurgy and materials Science, 43 (3). pp. 175-179.

Roy, G G and Chaudhary, P N and Minj, R K and Goel, R P (2001) Dephosphorization of ferromanganese using BaCO3-based fluxes by submerged injection of powders: A preliminary kinetic study. Metallurgical and Materials Transactions B, 32 (3). pp. 558-561.

S

Sahoo, K L and Sivaramakrishnan, C S and Chakrabarti, A K (2001) The effect of Mg treatment on the properties of Al–8.3Fe–0.8V–0.9Si alloy. Journal of Materials Processing Technology, 112 (1). pp. 6-11.

Sasisekaran, B and Rao, B Raghunatha (2001) Iron in Ancient Tamilnadu. In: Metallurgy in India - A Retrospective, November 26, 2000, NML, Jamshedpur.

Srivastava, V C and Mandal, R K and Ojha, S N (2001) Microstructural evolution during spray forming of an Al-18Si alloy. Journal of Materials Science Letters, 20 . pp. 27-29.

Srivastava, V C and Mandal, R K and Ojha, S N (2001) Microstructure and mechanical properties of Al–Si alloys produced by spray forming process. Materials Science and Engineering, 304-306 . pp. 555-558.

Srivastava, V C and Shukla, P and Ojha, S N (2001) Microstructural features induced by spray forming process. Journal of Metallurgy and materials Science, 43 (2). pp. 77-91.

Srivastava, V C and Upadhyay, A and Ojha, S N (2001) Microstructural features induced by spray forming of a ternary Pb–Sn–Sb alloy. Bulletin of Materials Science, 23 (2). pp. 73-78.

T

Thakur, V K (2001) Iron Technology and Social Change in Early India (350 B.C. - 200 B.C). In: Metallurgy in India - A Retrospective, November 26, 2000, NML, Jamshedpur.

Tripathi, V (2001) Emergence of Iron in India : Archaeological Perspective. In: Metallurgy in India - A Retrospective, November 26, 2000, NML, Jamshedpur.

U

Udaya Bhaskar, K and Govindarajan, B and Rao, K K and Barnwal, J P and Venugopal, R and Jakhu, M R and Rao, T C (2001) Graphite rejection in a lead concentrate using gravity concentration techniques. Journal of Metallurgy and materials Science, 43 (1). pp. 25-31.

Upadhyay, C and Verma, H C and Rath, C and Sahu, K K and Anand, S and Das, R P and Mishra, N C (2001) Mössbauer studies of nanosize Mn1−xZnxFe2O4. Journal of Alloys and Compounds, 326(1-2) . pp. 94-97.

V

Vaish, A K and Biswas, P K and Humane, M M and Rao, D S and Goswami, N G (2001) Tribal system of iron making in India -R&D for optimum operation. Journal of Metallurgy and materials Science, 43 (3). pp. 213-220.

Vaish, A K and Humane, M M and De, P K and Ranganath, V R and Das, Goutam and Das, Swapan K and Kumar, R and Das, Samar (2001) Effect of thermo-mechanical processing on the microstructure and mechanical properties of micro alloyed steels. Journal of Metallurgy and materials Science, 43 (4). pp. 221-238.

Vaish, A K and Humane, M M and De, P K and Ranganath, V R and Minj, R K and Das, Goutam and Das, S K and Kumar, R and Das, Samar and Lakra, B A and Das, Swapan K and Ravi Kumar, B and Das, Samar and Lakra, B A (2001) Development of microalloyed steels and its design aspects Part I : Medium and low carbon micro-alloyed forging steels. Journal of Metallurgy and materials Science., 43 (3). pp. 147-173.

Vaish, A K and Singh, S D and Biswas, D K (2001) Cokeless cupola melting - An efficient and cost effective process for foundries. Journal of Metallurgy and materials Science, 44 (4). pp. 239-245.

This list was generated on Tue Aug 16 00:38:17 2022 IST.