Items where Division is "Material Science and Technology" and Year is 2025

Arif , Sk Md and Bar, H.N and Kumar Sahoo, Biraj and Chaudhary, Chandan and Mandal, D. (2025) Effect of Quench and Partitioning Treatment on Microstructure, Tensile Properties, and Low Cycle Fatigue Behavior of Low-Carbon High Strength Steel. Journal of Materials Engineering and Performance .

Bharti, Adarsh and Maharaja, Hitarth and Mishra, Sushil and Sivaprasad, S and Bhattacharyya , Abir (2025) Effect of strain amplitude on low-cycle fatigue behavior of an alpha Cu-Zn alloy. Materials Today Communications .

W. Aldbea , Ftema and Va’zques- Va’zquez, C. and Abobaker , M.A and Alsteeni , A.Y and Saad, A. and Sharma, A. and K. Singh, Pramod and Diantoro, Markus and May, M. and Abdullah, T. and Edhirej, A. and Aldosari, S.M. and Kraini , M. (2025) Structural and optical properties of α aluminum oxide prepared by sol-gel method. Current Applied Physics .

Alex, T C and Singla, Rashmi and Sahoo, D P and Mehta, K D and Kumar , Sanjay (2025) Avenues of resources efficiency enhancement in iron and steel production. Minerals Engineering, 222 .

Anuraag, N S and Kumar, U and Pradhan, S and Shaw, S K and Sharma, A and Prasad, N K (2025) Rhombohedral phase high-entropy alloy of AlMnCuZnBi as a photo-Fenton catalyst for methyl orange degradation. Journal of Alloys and Compounds, 1010 .

Bagui, Sumanta and Veer Singh, Chandra and Mahato, Bhupeshwar and Vijay , R. (2025) Creep deformation behavior of an oxide dispersion strengthened modified iron aluminide alloy. Intermetallics .

Bharti , Adarsh and dey, Rima and Sivaprasad , S. and Tarafder, S. and Bhattacharyya, Abir (2025) Deformation response and microstructure evolution in 304LN stainless steel subjected to multiaxial fatigue loading under different strain paths. International Journal of Pressure Vessels and Piping .

Chakladar, S and Banerjee, Riya and Mohanty, Ashok and Chattopadhyay, S K and Chakravarty, S (2025) Extractability and occurrence of rare earth elements in bottom ash through sequential leaching and pre-treatment. Energy Sources Part A-Recovery Utilization and Environmental Effects, 47(1) . pp. 10-20.

Chandan, A K and Sahoo, Biraj K and Bansal, G K and Ghosh, M (2025) Root Cause Analysis for the Failure of an Air Compressor Impeller. Transactions of the Indian Institute of Metals, 78(1) .

Charan Arohi, Adya and Nayak, Priyadarshini and Kumar Punyamanthula, Kranti and Ramesh, Surla and Tarafder, Soumitra and Frenzel, Jan and Sen, Indrani (2025) Processing-microstructure-functional properties correlation for NiTi-based pseudoelastic shape memory alloy. Journal of Material Science .

Das, T K and Dutta, C and Das, P K and Rajput, R and Bhakat , N K and Bhave, K and Sagar, Sarmishtha Palit (2025) Real-Time In-Process Measurement and Control of Zinc Coating Weight: Assessing Eddy Current Sensor Proficiency in Industrial Applications. IEEE Sensors Journal, 25(1) . pp. 1527-1534.

Kailath, A J and Kumar, Krishna and Kumar, Roshan and Kumar, Nikhil and Gour, Kuldeep Singh and Randhawa, Navneet Singh and Singh, Priyanka and Rao, K Sudhakar (2025) Study research protocol for Phenome India-CSIR Health Cohort Knowledgebase: A prospective multi-modal follow-up study on a nationwide employee cohort. Biology Methods and Protocols, 10(1) . bpaf061 .

Kumar, Amit and Guguloth, K and Pandey, S M and Sirohi, S and Swierczynska, A and Fydrych, D and Pandey, Chandan (2025) Microstructure degradation and creep failure study of the dissimilar metal welded joint of heat-resistant steel and Inconel 617 alloy tested at 650 °C and applied stress range of 100-150 MPa. International Journal of Pressure Vessels and Piping, 214 .

Kumar, Arun and Kumar, Sunil and Kumar, Ashok and Sharma, Sanjay (2025) Prediction of creep degradation in Fe-Cr-Ni single-crystal alloys for high-temperature applications: a molecular-dynamics and machine-learning approach. Mechanics of Time-Dependent Materials, 29(1) .

Kumar, P and Chakravarty, S and Majumder, A K (2025) Relationship between petrological characteristics and gross calorific value of coal. Fuel, 380 .

Kumar, Sunil and Kumar, Arun and Kumar, Ashok (2025) Nanostructure Evolution and Rupture Mechanisms in Layered Fe-Cr-Ni Alloy under Multiaxial Tensile Deformation: A Molecular Dynamics Study. Journal of Materials Engineering and Performance .

Kumar, Sunil and Sahu, Ranjan K (2025) External Electric Field Induced Atomic Charge Migration and Surface Degradation of CsPbI3: A Reactive Molecular Dynamics Simulation based study. Material Chemistry and Physics , 333 .

Md Arif, Sk and Nandan Bar, Himadri and Ghosh, Mainak and Hazra, Biplab and Ghorai, Satadal and Mandal, Durbadal (2025) Impact of Quenching and Partitioning Time on Microstructures, Mechanical and Fatigue Properties of High-Strength Steel. Transactions of the Indian Institute of Metals .

Moususmi, Das and Suranjit, Kumar and PK , Singh and M, Ghosh (2025) Correlating Microstructure with Mechanical Properties for Different Regions of Dissimilar Metal-Welded Joints. J of Materials Engg. & Performance (2.2).

Pradhan, Padmapani and Dey, Shaon and Manna, K and Panda, A B and Pal, Sagar (2025) In situ synthesis of a photocatalyst using TiO2 QDs-immobilized functionalized galactomannan for degradation of organic pollutant. Journal of Water Process Engineering, 69 .

Roy, Rajat K and Murugaiyan, Premkumar and Sahoo, Biraj K. and Kurapati, Gopala Krishna and Panda, Ashis K. and Dubey, Paritosh and Mishra, Durgamadhab (2025) Impacts of powder size on amorphous-crystalline transition behaviours in gas atomized Fe-rich alloy powders. Powder Technology , 464 (4.6). p. 121199.

Roy, Rajat K and Sahu, Rakesh and Murugaiyan, Premkumar and Kurapati, Gopala Krishna and Panda, Ashis K. (2025) Structural and thermal behaviors of iron‑based gas‑atomized powders. Journal of Thermal Analysis and Calorimetry, Online (3.1).

Salot, M and Santhy, K and Naganabonia, V R and Singh, S G and Pramanick, A K and Mandal , D and Avasthi, G and Chaudhary, S K (2025) On improved inorganic gas-sensing characteristics of microwave-treated tungsten oxide quantum dots at room temperature. International Journal of Applied Ceramic Technology .

Sukhbaatar, T and Piton, R and Giusti, F and Arrachart, G and Duvail, M and Kumari, Aarti and Daware, S and Gupta, Shally and Goverapet, S and Sahu, S K and Rai, Beena and Pellet-Rostaing, S (2025) Lipophilic EDTA-based ligands in different diluents for the extraction of rare earths: Preliminary results with Nd(III), Dy(III) and Pr(III) in chloride and nitrate media. Hydrometallurgy, 231 .