Items where Division is "Material Science and Technology" and Year is 2015

Arora, Punit and Gupta, Suneel K and Bhasin, V and Singh, R K and Sivaprasad, S and Tarafder, S (2015) Fatigue studies on Carbon-steel tubes under multiaxial loading. Transactions, SMiRT-23, Manchester, United Kingdom, August 10-14, 2015, Division III (Applied Computation Simulation and Animation) . pp. 1-13.

Baral, Jayashree and Swaminathan, J and Chakrabarti, D and Ghosh, R N (2015) Creep behavior of P91B steel in the presence of a weld joint. Materials Science and Engineering A, 631 (IF-2.409). pp. 220-229.

Barat, K and Metya, A and Sathpathy, S and Sivaprasad, S and Tarafder, S and Kar, Sujoy Kumar (2015) Ultrasonic quantification of high temperature cyclic damage in an advanced nickel based superalloy. Materials Science and Engineering A, 625 (IF-2.409). pp. 194-204.

Basariya, M R and Roy, Rajat K and Pramanick, A K and Srivastava, V C and Mukhopadhyay, N K (2015) Structural transition and softening in Al-Fe intermetallic compounds induced by high energy ball milling. Materials science and engineering a-structural materials properties microstructure and processing, 638 (IF-2.567). pp. 282-288.

Basavaraja, C (2015) Microwave absorption studies of polyaniline nanocomposites containing Poly (2-acrylamido-2- methyl-1-propanesulfonicacid)/graphene nanoplatelet. Journal of Metallurgy and Materials Science, 57(3) . pp. 135-141.

Basavaraja, C (2015) Partially degradable electrically conductive poly (3,4-ethylenedioxy-thiophene)/sigma cellulose polymer composites. Journal of Metallurgy and Materials Science, 57(4) . pp. 251-255.

Bhagat, R P (2015) Study on utilisation coal fines generated in sponge iron making through pelletisation. Journal of Metallurgy and Materials Science, 57(3) . pp. 143-149.

Bhattacharya, S and Roychowdhury, Anirban and Das, D and Nayar, S (2015) Multi-functional biomimetic graphene induced transformation of Fe3O4 to ε-Fe2O3 at room temperature. RSC Advance (IF-3.84). pp. 89488-89497.

Bhattacharya, Soumya and Mishra, Swati and Gupta, P and Pranav, P and Ghosh, M and Pramanick, A K and Mishra, D P and Nayar, S (2015) Liquid phase collagen modified graphene that induces apoptosis. RSC Advances, 5(55) (IF-3.84). pp. 44447-44457.

Bhattacharya, Soumya and Roychowdhury, Anirban and Tiwari, V and Prasad, A B Krishna and Ningthoujam, R S and Patel, A B and Das, Dipankar and Nayar, S (2015) Effect of biomimetic templates on the magneto-structural properties of Fe3O4 nanoparticles. RSC Advances, 5(18) (IF-3.708). pp. 13777-13786.

Biswas, A and Nistala, Harsha and Sinha, Moni (2015) Effect of flux granulometry on the sintering process using thermodynamic analysis. Journal of Metallurgy and Materials Science, 57(2) . pp. 67-74.

Chakraborty, S K (2015) E-waste recycling. Journal of Metallurgy and Materials Science, 57(2) . pp. 107-113.

Chatterjee, Partho Pratim (2015) Generation of piezoelectric potential difference from solar energy induced thermo-mechanical stress. Journal of Metallurgy and Materials Science, 57(1) . pp. 19-25.

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2015) Cyclic fracture behaviour of 20MnMoNi55 steel at room and elevated temperatures. Fatigue & Fracture of Engineering Materials & Structures, 38 (IF-1.561). pp. 813-827.

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2015) Incremental cyclic fracture behaviour of 20MnMoNi55 steel at room temperature. International Journal of Fracture, 192(1) (IF-1.348). pp. 117-132.

Das, Arpan (2015) Crystallographic variant selection of martensite at high stress/strain. Philosophical Magazine, 95(20) (IF-1.427). pp. 2210-2227.

Das, Arpan (2015) Crystallographic variant selection of martensite during fatigue deformation. Philosophical Magazine, 95(8) (IF-1.427). pp. 844-860.

Das, Arpan (2015) Dislocation configurations through austenite grain misorientations. International Journal of Fatigue, 70 (IF-2.665). pp. 473-479.

Das, Tuhin and Saha, Rajib and Bera, Supriya and Dahmen, Kirsten and Ghosh, M and Haldar, A and Bleck, Wolfgang and Ghosh Chowdhury, S (2015) Effect of High Tensile Strain Rate on the Evolution of Microstructure in Fe-Mn-C-Al Twinning-Induced Plasticity (TWIP) Steel. Metallurgical and Materials Transactions A, 46A (1) (IF-1.730). pp. 6-11.

Director, NML (2015) Fatigue and Fracture - A compilation of 100 research publications. Compilation of 100 research publications . pp. 1-948.

Ghosh, M and Santosh, R and Das, Swapan K and Das, Goutam and Mahato, B and Korody, J and Kumar, S and Singh, P K (2015) Effect of Structural Heterogeneity on In Situ Deformation of Dissimilar Weld Between Ferritic and Austenitic Steel. Metallurgical and Materials Transactions A, 46A (IF-1.730). pp. 3555-3568.

Gopinath, K and Gupta, R K and Sahu, J K and Ray, P K and Ghosh, R N (2015) Designing P92 grade martensitic steel header pipes against creep–fatigue interaction loading condition: Damage micromechanisms. Materials & Design, 86 (IF-3.501). pp. 411-420.

Goswami, B and Ray, Ashok K and Raj, A (2015) Frontiers in materials and processing in chemical plants. Journal of Metallurgy and Materials Science, 57(2) . pp. 57-65.

Goswami, B and Ray, Ashok K and Raj, A (2015) Frontiers in materials for air frame structure. Journal of Metallurgy and Materials Science, 57(4) . pp. 187-195.

Goswami, B and Ray, Ashok K and Raj, A (2015) Frontiers in materials for fastening and joining. Journal of Metallurgy and Materials Science, 57(3) . pp. 115-126.

Guria, A and Mandal, G K and Hodgson, Peter and Beynon, John H and Ghosh Chowdhury, S (2015) Effect of Twinning on Microstructural Evolution During Dynamic Recrystallisation of Hot Deformed As-Cast Austenitic Stainless Steel. Metallurgical and Materials Transactions A, 46(10) . pp. 4423-4428.

Hauser, M and Wendler, M and Ghosh Chowdhury, S and Weiss, A and Mola, J (2015) Quantification of deformation induced alpha '-martensite in Fe-19Cr-3Mn-4Ni-0.15C-0.15N austenitic steel by in situ magnetic measurements. Materials Science and Technology, 31(12) (IF-1.909). pp. 1473-1478.

Husain, M M and Sarkar, R and Pal, T K and Prabhu, N and Ghosh, M (2015) Friction Stir Welding of Steel: Heat Input, Microstructure, and Mechanical Property Co-relation. Journal of Materials Engineering and Performance, 24 (IF-0.998). pp. 3673-3683.

Kalpana, Y and Sushanta, Roy and Alka, (2015) Evaluation of silanes as corrosion resistant coatings for Cu-alloy in Sea water. Journal of Metallurgy and Materials Science, 57(1) . pp. 27-32.

Khan, S S and Rao, T R (2015) Multi objective optimization of turning parameters for Al 6061 using genetic algorithm. Journal of Metallurgy and Materials Science, 57(4) . pp. 243-249.

Kulhara, Neelkamal (2015) Estimation of mositure in coke using non-invasive infrared thermography. Masters thesis, NIT Trichy.

Kumar, A and Tripathi, B and Mishra, S and Kumar, P and Sharma, I H (2015) Power consumption and design optimization of a sustainable H fuel cell powered vehicle. Journal of Metallurgy and Materials Science, 57(3) . pp. 157-165.

Kumar, P and Roy, A (2015) Creep damage and remaining life assessment of service exposed engineering materials used in petrochemical industry. Journal of Metallurgy and Materials Science, 57(1) . pp. 41-56.

Kumar, Sanjay and Kristaly, Ferenc and Mucsi, Gabor (2015) Geopolymerisation behaviour of size fractioned fly ash. Advanced Powder Technology, 26(1) (IF-1.300). pp. 24-30.

Mahato, B and Shee, S K and Sahu, T and Ghosh Chowdhury, S and Sahu, Puspendu and Porter, D A and Karjalainen, L P (2015) An effective stacking fault energy viewpoint on the formation of extended defects and their contribution to strain hardening in a Fe-Mn-Si-Al twinning-induced plasticity steel. Acta Materialia, 68 (IF-2.380). pp. 69-79.

Metya, Avijit Kr and Ghosh, M and Parida, N and Balasubramaniam, Krishnan (2015) Effect of tempering temperatures on nonlinear Lamb wave signal of modified 9Cr–1Mo steel. Materials Characterization, 107 . pp. 14-22.

Mukhopadhyay, C.K and Haneef, T.K and Metya, Avijit Kr and Murthy, G V S (2015) Acoustic emission monitoring during hydrotesting of a mounded LPG storage vessel of petrochemical industry. Strength, Fracture and Complexity, 9(4) (IF-0.76). pp. 251-264.

Mukhopadhyay, N K and Uhlenwinkel, V and Srivastava, V C (2015) Synthesis and Characterization of Bulk Al-Cu-Fe Based Quasicrystals and Composites by Spray Forming. Journal of materials engineering and performance, 24(6) (IF-0.98). pp. 2172-2178.

Nayak, B and Meyer, Franz Michael (2015) Tetrataenite in Terrestrial Rock. American Mineralogist, 100(1) (IF-2.059). pp. 209-214.

Nistala, Harsha and Biswas, A and Sinha, Moni (2015) Heating index : estimation through numerical modeling of the sintering process and its relationship with sinter quality. Journal of Metallurgy and Materials Science, 57(2) . pp. 93-105.

Pal, J and Ghorai, S and Agarwal, Sanjay and Nandi, B and Chakraborty, T and Das, Goutam and Prakash, S (2015) Effect of Blaine Fineness on the Quality of Hematite Iron Ore Pellets for Blast Furnace. Mineral Processing and Extractive Metallurgy Review, 36 (2) (IF-0.690). pp. 83-91.

Pal, J and Ghorai, S and Nandi, B and Chakaborty, T and Das, Goutam and Venugopalan, T (2015) Effect of pyroxenite and olivine minerals as source of MgO in hematite pellet on improvement of metallurgical properties. Journal of Central South University, 22(9) . pp. 3302-3310.

Panda, A K and Dey, Sushmita and Roy, Rajat K and Singh, Satnam and Mitra, A (2015) Influence of phase transformation on interfacial activity and bend sensitivity of rapidly quenched Fe77.5Si7.5B15/Co72.5Si12.5B15 bilayered magnetostrictive ribbons. Journal of Magnetism and Magnetic Materials, 378 (IF-1.568). pp. 440-446.

Pandey, R S (2015) Mathematical modeling of iron ore pelletization in a straight-grate induration process. Journal of Metallurgy and Materials Science, 57(3) . pp. 179-186.

Pattanayak, S and Dey, Swati and Chatterjee, S and Ghosh Chowdhury, S and Datta, S (2015) Computational intelligence based designing of microalloyed pipeline steel. Computational Materials Science, 104 (IF-1.879). pp. 60-68.

Prakash, Amit (2015) The effect of Residual Stress on Fatigue crack growth rate in AISI 304LN Stainless steel. Masters thesis, Indian Institute of Technology (BHU), Varanasi.

Prakash, Amit and Lal, Radha Krishna and Choubey, Vikas Kumar and Dwivedi, J P and Singh, V P (2015) Study of Residual Stresses in I sectioned bars of Linear Work-Hardening Materials under Torsion. 2nd International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI 2015) . pp. 299-310.

Prasad, A K and Pathak, D D and Pan, S K (2015) Characterisation of low grade iron ores of Bursua iron ore mines. Journal of Metallurgy and Materials Science, 57(1) . pp. 1-7.

Randhawa, N S and Dwivedi, D and Prajapati, S and Jana, R K (2015) Application of manganese nodules leaching residue for adsorption of nickel(II) ions from aqueous solution. International Journal of Environmental Science and Technology, 12(3) (IF-1.794). pp. 857-864.

Ravi Kumar, B and Sharma, S and Kashyap, B P and Prabhu, N S (2015) Ultrafine grained microstructure tailoring in austenitic stainless steel for enhanced plasticity. Materials & Design, 68 (IF-3.171). pp. 63-71.

Ray, Ajoy K and Chatterjee, S and Singh, J K and Bapari, H (2015) Thermal Exfoliation of Natural Cellulosic Material for Graphene Synthesis. Journal of Materials Engineering and Performance, 24(1) (IF-0.981). pp. 80-84.

Roy, Nilima and Das, Avimanyu and Ray, Ashok K (2015) Simulation and quantification of creep damage. International Journal of Damage Mechanics (IF-1.495).

Sahu, J K and Ravi Kumar, B and Das, S K and Paulose, N and Mannan, S L (2015) Isothermal high temperature low cycle fatigue behavior of Nimonic-263: Influence of type I and type II hot corrosion. Materials Science and Engineering A, 622 (IF-2.409). pp. 131-138.

Sathe, P and Sarkar, B and Das, Avimanyu (2015) Residence time distribution of solid particles in liquid fluidised bed separator. Canadian Metallurgical Quarterly, 54(1) (IF-0.495). pp. 110-122.

Sau, D C and Banerjee, A and Kumar, Manoj and Kumar, Rakesh (2015) Experimental investigation for conversion of hematite to magnetite with high ash Jhama Coal. Journal of Metallurgy and Materials Science, 57(2) . pp. 83-91.

Seth, P P and Das, Arpan and Bar, H N and Sivaprasad, S and Basu, A and Dutta, K (2015) Evolution of Dislocation Density During Tensile Deformation of BH220 Steel at Different Pre-strain Conditions. Journal of Materials Engineering and Performance, 24(7) (IF-0.998). pp. 2779-2783.

Sethi, Ankit S and Mahobia, G S and sinha, O P (2015) Reduction behavior of iron ore pellets with addition of plastics along with conventional reducing agents. Journal of Metallurgy and Materials Science, 57(3) . pp. 167-171.

Sharma, S and Khan, Md Soaib and Ranjan, Rajeev and Choudhary, R N P (2015) Energy material Sm3+-modified lead zirconate titanate (PZT) ceramics : preparation, characterisation and application. Journal of Metallurgy and Materials Science, 57(3) . pp. 151-155.

Sheikh, Lubna and Dutta, Abinash and Chandra, R and Nayar, S (2015) Effect of Ferrofluids on Microbes. International Journal of New Technologies in Science and Engineering, 2(3) . pp. 109-117.

Sheikh, Lubna and Mahto, Neha and Nayar, S (2015) In situ synthesis of hydroxyapatite nanocomposites using iron oxide nanofluids at ambient conditions. Journal of Materials Science: Materials in Medicine, 26(1) (IF-2.379). p. 5393.

Sheikh, Lubna and Vohra, R and Verma, A K and Nayar, S (2015) Biomimetically Synthesized Aqueous Ferrofluids Having Antibacterial and Anticancer Properties. Materials Sciences and Applications, 6 . pp. 242-250.

Singh, Rajesh Kumar (2015) Corrosion and corrosion protection of mild steel in SO environment. Journal of Metallurgy and Materials Science, 57(1) . pp. 33-40.

Singhbabu, Y N and Choudhary, Shyam K and Shukla, N and Das, S and Sahu, Ranjan K (2015) Observation of large positive magneto-resistance in bubble decorated graphene oxide films derived from shellac biopolymer: a new carbon source and facile method for morphology-controlled properties†. Nanoscale, 7 (IF-6.739). pp. 6510-6519.

Singhbabu, Y N and Sivakumar, B and Singh, J K and Bapari, H and Pramanick, A K and Sahu, Ranjan K (2015) Efficient anti-corrosive coating of cold-rolled steel in a seawater environment using an oil-based graphene oxide ink†. Nanoscale, 7 (6.739). pp. 8035-8047.

Sinha, Moni and Nistala, Harsha (2015) Microstructural analysis of sinter breakage. Journal of Metallurgy and Materials Science, 57(2) . pp. 75-82.

Sinha, Moni and Nistala, Harsha and Biswas, A (2015) Effect of inert gas injection on sinter RDI. Journal of Metallurgy and Materials Science, 57(3) . pp. 173-178.

Sivakumar, B and Singh, Raghuvir and Pathak, L C (2015) Corrosion behavior of titanium boride composite coating fabricated on commercially pure titanium in Ringer's solution for bioimplant applications. Materials Science & Engineering C-Materials for Biological Applications, 48 (IF-2.736). pp. 243-255.

Suresh, S and Viswanathan, N N (2015) Hydrogen reduction of single pellet nickel oxide under microwave irradiation. Journal of Metallurgy and Materials Science, 57(4) . pp. 257-264.

Verma, Amit (2015) Central quality assessment of continuously cast high carbon billets using ultrasonic c-scan imaging. Masters thesis, NIT Trichy.

Vijayasarathi, P and Prabhu, S P and Rajaram, Gukan (2015) Abrasive wear behavior of Ti-Al-N hard-faced coatings evaluated with ball-cratering test method. Journal of Metallurgy and Materials Science, Vol. 57, No. 1, January-March 2015, pp. 9-18, 57(1) . pp. 9-18.

Vijayasarthi, P and Kavitha, C (2015) An investigation of design and thermal analysis of the different material on disc brake with frictional heat generation. Journal of Metallurgy and Materials Science, 57(4) . pp. 237-242.