Items where Division is "Material Science and Technology" and Year is 2009

Article

Aich, S and Das, D and Al-Omari, I A and Alagarsamy, P and Ghosh Chowdhury, S and Chakraborty, M and Shield, J E and Sellmyer, D J (2009) Microstructures and magnetic properties of rapidly solidified Ni54Fe27-2xGa19+2x ferromagnetic Heusler alloys. Journal of Applied Physics, 105 (7). 07A943.

Banerjee, G and Pal, T K and Das, Goutam (2009) Performance Evaluation of Resistance Spot Welded Interstitial Free Steel Under Cryogenic Conditions. Journal of Testing And Evaluation, 37 (6). pp. 566-572.

Bhattacharyya, A S and Das, G C and Mukherjee, S and Mishra, Suman K (2009) Effect of radio frequency and direct current modes of deposition on protective metallurgical hard silicon carbon nitride coatings by magnetron sputtering. Vacuum, 83 (12). pp. 1464-1469.

Bhattacharyya, A S and Mishra, Suman K and Mukherjee, Surojit and Das, G C (2009) A comparative study of Si–C–N films on different substrates grown by RF magnetron sputtering. Journal of Alloys and Compounds, 478 (1-2). pp. 474-478.

Chaudhuri, S and Ghosh, R N (2009) Creep Behavior Of 2.25cr1mo Steel-Effects Of Thermal Ageing And Pre-Strain. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing , 510-11 (sl. lss). pp. 136-141.

Das, Arpan and Das, Swapan K and Tarafder, S (2009) Correlation of Fractographic Features with Mechanical Properties in Systematically Varied Microstructures of Cu-Strengthened High-Strength Low-Alloy Steel. Metallurgical and Materials Transactions A, 40 (13). pp. 3138-3146.

Das, Arpan and Tarafder, S (2009) Experimental investigation on martensitic transformation and fracture morphologies of austenitic stainless steel. International Journal of Plasticity, 25 (11). pp. 2222-2247.

Das, Goutam and Das, Mousumi and Sinha, Satish and Gupta, K K and Chakravarty, S and Ray, Ashok K (2009) Characterization of cast stainless steel weld pools by using ball indentation technique. Materials Science and Engineering: A, 513-514 . pp. 389-393.

Das, K P and Ganguly, S and Chattopadhyay, P P and Tarafder, S and Bandopadhyay, N R (2009) Exploring The Possibilities Of Development Of Directly Quenched TRIP-Aided Steel By The Artificial Neural Networks (ANN) Technique. Materials and Manufacturing Processes, 24 (1). pp. 68-77.

Das, Swapan K and Chatterjee, S and Tarafder, S (2009) Effect of microstructures on deformation behaviour of high-strength low-alloy steel. Journal of Materials Science, 44 (4). pp. 1094-1100.

Ghosh, M and Kar, Abhijit and Das, Swapan K and Ray, Ajoy K (2009) Aging Characteristics of Sn-Ag Eutectic Solder Alloy with the Addition of Cu, In, and Mn. Metallurgical and Materials Transactions A, 40A . pp. 2369-2376.

Ghosh, Swati and Kain, V and Ray, A and Roy, H and Sivaprasad, S and Tarafder, S and Ray, K K (2009) Deterioration in Fracture Toughness of 304LN Austenitic Stainless Steel Due to Sensitization. Metallurgical and Materials Transactions A, 40 (12). pp. 2838-2949.

Ghosh Chowdhury, S and Pereloma, Elena V and Santos, D B (2009) Corrigendum to “Evolution of texture at the initial stages of continuous annealing of cold rolled dual-phase steel: Effect of heating rate” [Mater. Sci. Eng.: A 480 (2008) 540–548]. Materials Science and Engineering: A , 525 (1-2). 211- .

Ghosh Chowdhury, S and Sahu, Puspendu and Mahato, B and De, P K (2009) Evolution of Recrystallization Texture in AISI300 Series Austenitic Stainless Steels After Cold Rolling to Large Strain. Microstructure and Texture in Steels, 22 (22). pp. 361-378.

Goswami, B and Ray, Ashok K (2009) Emerging trends in mechanical properties of Al-Li-X alloys. Journal of Metallurgy and Materials Science, 51 (3). pp. 149-173.

Goswami, B and Ray, Ashok K (2009) Perspectives of sensor alloys in nickel base systems. Journal of Metallurgy and Materials Science, 51 (1). pp. 1-20.

Goswami, B and Ray, Ashok K (2009) Perspectives of shape memory surgical alloys in nickel base systems. Journal of Metallurgy and Materials Science, 51 (2). pp. 77-89.

Goswami, B and Ray, Ashok K (2009) Recent bio-medical alloys in cobalt base systems. Journal of Metallurgy and Materials Science, 51 (4-5). pp. 233-246.

Guha, Avijit and Singh, Sashi and Kumaresan, R and Nayar, S and Sinha, Arvind (2009) Mesenchymal cell response to nanosized biphasic calcium phosphate composites. Colloids and Surfaces B: Biointerfaces, 73 (1). pp. 146-151.

Gupta, Siddhi and Pramanick, A K and Kailath, A J and Mishra, T and Guha, Avijit and Nayar, S and Sinha, Arvind (2009) Composition dependent structural modulations in transparent poly(vinyl alcohol) hydrogels. Colloids and Surfaces B: Biointerfaces, 74 (1). pp. 186-190.

Jindal, Vikas and Srivastava, V C and Uhlenwinkel, V (2009) On the role of liquid phase stability and GFA parameters. Journal of Non-Crystalline Solids, 355 (28-30). pp. 1552-1555.

Khanra, A K and Pathak, L C and Godkhindi, M M (2009) Application of new tool material for electrical discharge machining (EDM). Bulletin of Materials Science, 32 (4). pp. 401-405.

Kumar, A Seshu and Ravi Kumar, B and Datta, G L and Ranganath, V R (2009) Effect of Microstructure and Grain Size on the Fracture Toughness of a Micro Alloyed Steel. Materials Science and Engineering A .

Kumari, K and Prasad, K and Yadav, K L and Sen, S (2009) Structural and Dielectric Properties of ZrO2 Added (Na1/2Bi1/2)TiO3 Ceramic. BRAZILIAN JOURNAL OF PHYSICS , 39 (2). pp. 297-300.

Mishra, Suman K (2009) Nano and Nanocomposite Superhard Coatings of Silicon Carbonitride and Titanium Diboride by Magnetron Sputtering. INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 6 (3). pp. 345-354.

Mohapatra, J N and Panda, A K and Mitra, A (2009) Magnetic properties evaluation of ageing behaviour in water-quenched 5Cr-0.5Mo stee. Journal Of Physics D-Applied Physics , 42 (9). 095006.

Munda, Parikshit and Dube, R K and Basu, Bikramjit and Koria, S C (2009) Friction and wear properties of steel backed Al–10Sn–4Si–1Cu metallic strips prepared via spray atomization–deposition-rolling route. Surface & Coatings Technology, 203 (23). pp. 3541-3548.

Murthy, G V S and Anish, K and Jayakumar, T and Ghosh, R N (2009) Characterization Of Precipitation Behavior In Nimonic 263 By Ultrasonic Velocity Measurements. Review Of Progress In Quantitative Nondestructive Evaluation, Vols 28a And 28b , 1096 . pp. 1252-1258.

Murthy, G V S and Sridhar, G and Kumar, Anish and Jayakumar, T (2009) Characterization of intermetallic precipitates in a Nimonic alloy by ultrasonic velocity measurements. Materials Characterization, 60 (3). pp. 234-239.

Nayak, B and Das, Swapan K and Bhattacharyya, K K (2009) Baddeleyite (ZrO2) in manganese nodules of Central Indian Ocean Basin: An evidence for low temperature mobility of zirconium. Geochimica et Cosmochimica Acta, 73 (13). A933-A933.

Nayar, S and Guha, Avijit (2009) Waste utilization for the controlled synthesis of nanosized hydroxyapatite. Materials Science and Engineering: C, 29 (4). pp. 1326-1329.

Panda, A K and Mohanta, Ojaswini and Ghosh, M and Mitra, A (2009) Development of Nanostructured CoFe-Based Alloys for High Temperature Magnetic Applications. Journal Of Nanoscience And Nanotechnology, 9 (9). pp. 5600-5603.

Panda, A K and Singh, S and Das, Swapan K and Mitra, A and Koblischka, M and Jamieson, B and Roy, Subrata (2009) Effect of magnetizing field on the martensitic transformations in a melt spun NiMnGa alloy. Journal Of Physics D-Applied Physics , 42 (24). p. 245004.

Parida, N and Das, Swapan K and Tarafder, S (2009) Failure analysis of railroad wheels. Engineering Failure Analysis, 16 (5). pp. 1454-1460.

Pramanick, A K (2009) Hybrid and nanomaterials - 2009. Current Science, 96 (11). pp. 1-2.

Pramanick, A K and Sinha, Arvind and Sastry, G V S and Ghosh, R N (2009) Near-grain-boundary characterization by atomic force microscopy. Ultramicroscopy, 109 (6). pp. 741-747.

Prasad, K and Kumari, K and Chandra, K P and Yadav, K L and Sen, S (2009) Dielectric relaxation and ac conductivity of WO3 added (Na1/2Bi1/2)TiO3 ceramic. Materials Science - Poland, 27 (2). pp. 373-384.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Ghosh, R N (2009) Role of strain-induced martensite on microstructural evolution during annealing of metastable austenitic stainless steel. Journal of Materials Science, 45 (4). pp. 911-918.

Ravi Kumar, B and Mahato, B and Sharma, S and Sahu, J K (2009) Effect of Cyclic Thermal Process on Ultrafine Grain Formation in AISI 304L Austenitic Stainless Steel. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science , 40A (13). pp. 3226-3234.

Ray, Ashok K and Guguloth, K and Swaminathan, J and Bose, S C and Roy, Nilima and Tiwari, Y N and Roy, P K and Alam, Z and Sharma, VSRA and Joshi, Srikanth V and Venkataraman, B and Das, D K (2009) Damage Resistance of a Thermal Barrier Coated Superalloy Used in Aero Turbine Blade under Accelerated Creep Condition. High Temperature Materials And Processes, 28 (1-2). pp. 35-53.

Ray, Ashok K and Roy, Nilima and Kar, Abhijit and Ray, Ajoy K and Bose, S C and Das, Goutam and Sahu, J K and Das, D K and Venkataraman, B and Joshi, Srikanth V (2009) Mechanical property and characterization of a NiCoCrAlY type metallic bond coat used in turbine blade. Materials Science and Engineering: A, 505 (1-2). pp. 96-104.

Ray, Ashok K and Whittenberger, J D (2009) Stress rupture behavior of a thermal barrier coated AE 437A Ni-based superalloy used for aero turbine blades. Materials Science and Engineering: A, 509 (1-2). pp. 111-114.

Ray, Mallar and Sarkar, S and Bandyopadhyay, N R and Hossain, S M and Pramanick, A K (2009) Silicon and silicon oxide core-shell nanoparticles: Structural and photoluminescence characteristics. Journal of Applied Physics, 105 (7). 074301.

Roy, Ajoy K and Mandhyan, A K and Sahoo, K L and Banhart, J and Chattoraj, I (2009) Electrochemical response of amorphous and devitrified Al-Ni-La-X (X = Ag, Cu) alloys. Materials and Corrosion / Werkstoffe und Korrosion, 60 (6). pp. 431-437.

Roy, H and Sivaprasad, S and Tarafder, S and Ray, K K (2009) Monotonic vis-à-vis cyclic fracture behaviour of AISI 304LN stainless steel. Engineering Fracture Mechanics, 76 (12). pp. 1822-1832.

Roy, Himadri and Sivaprasad, S and Tarafder, S and Ray, K K (2009) Crack Tip Damage Mechanism under Monotonic and Cyclic Loading Conditions. Key Engineering Materials , 417-418 (8). pp. 105-108.

Roy, Rajat K and Kar, Sujoy and Das, Siddhartha (2009) Evolution of microstructure and mechanical properties during annealing of cold-rolled AA8011 alloy. Evolution of microstructure and mechanical properties during annealing of cold-rolled AA8011 alloy, 468 . pp. 122-129.

Roy, Rajat K and Panda, A K and Das, Swapan K and Govind, and Mitra, A (2009) Development of a copper-based filler alloy for brazing stainless steels. Materials Science and Engineering A, 523 (1-2). pp. 312-315.

Roy, Rajat K and Panda, A K and Ghosh Chowdhury, S and Mitra, A and Ghosh, R N (2009) Effect of annealing treatment on soft magnetic properties of Fe–6.5 wt% Si wide ribbons. Journal of Magnetism and Magnetic Materials, 321 (18). pp. 2865-2870.

Rupa, P K P and Chakraborti, P C and Mishra, Suman K (2009) Mechanical and deformation behaviour of titanium diboride thin films deposited by magnetron sputtering. Thin Solid Films, 517 (9). pp. 2912-2919.

Sahoo, K L and Pathak, B N (2009) Solidification behaviour, microstructure and mechanical properties of high Fe-containing Al–Si–V alloys. Journal of Materials Processing Technology, 209 (2). pp. 798-804.

Sahu, J K and Ghosh, R N and Christ, H J (2009) Low cycle fatigue behaviour of duplex stainless steel: influence of isothermal aging treatment. Fatigue & Fracture of Engineering Materials & Structures, 33 (2). pp. 77-86.

Sahu, J K and Krupp, U and Ghosh, R N and Christ, H J (2009) Effect of 475 °C embrittlement on the mechanical properties of duplex stainless steel. Materials Science and Engineering: A, 508 (1-2). pp. 1-14.

Singh, Satnam and Mitra, A and Panda, A K (2009) Magnetic and structural evolution in Ni-rich off-stoichiometric NiMnGa melt spun ribbons. Journal of Metallurgy and Materials Science, 51 (3). pp. 197-203.

Sinha, Arvind and Guha, Avijit (2009) Biomimetic patterning of polymer hydrogels with hydroxyapatite nanoparticles. Materials Science and Engineering: C, 29 (4). pp. 1330-1333.

Sinha, Arvind and Gupta, A K and Pramanick, A K and Nayar, S and Gunjan, M K and Mishra, T and Bhatt, N C and Vishwanath, N and Das, Samar (2009) Mimicking biomineralization under microgravity. Materials Science and Engineering: C, 29 (3). pp. 779-784.

Swaminathan, J and Singh, Raghuvir and Gunjan, M K and Chattoraj, I (2009) Failure analysis of air pre-heater tubes of a petrochemicals plant. Engineering Failure Analysis, 16 (7). pp. 2371-2381.

Tarafder, Mita and Chattoraj, I and Tarafder, S and Nasipuri, M (2009) Self-similar and self-affine characteristics of microstructural images of HSLA steel. Materials Science and Technology, 25 (4). pp. 542-548.

Venkateswarlu, K and Rajnikanth, V and Naveen, T and Sinha, D P and Atiquzzaman, and Ray, Ajoy K (2009) Abrasive wear behavior of thermally sprayed diamond reinforced composite coating deposited with both oxy-acetylene and HVOF techniques. Wear, 266 (9-10). pp. 995-1002.

Conference or Workshop Item

Bose, S C and Roy, Nilima and Ghosh, R N (2009) Probabilistic creep life assessment of austenitic stainless steel. In: NMD - ATM 2009, November 14, 2009 to November 17, 2009, Science City Complex,Kolkata, India.

Ghosh, Arpita and Das, T K and Mandal, S K and Mohan, B M (2009) Analytical Structure and Stability Analysis of a Fuzzy Two-Term Controller with Multi-Fuzzy Sets. In: Automation, Robotics & Control Systems, July 13-16, 2009, Orlando, Florida, USA.

Ghosh Chowdhury, S (2009) Physical Metallurgy. In: A Continuing Education Course on Metallurgy for Engineers, December 14-16, 2009, NML, Jamshedpur.

Metya, Avijit Kumar and Murthy, G V S and Bar, H N and Parida, N (2009) Microstructural Characterization of Precipitation Process in a Nickel-Alloy by Non-linear Ultrasonic. In: Proceedings of the National Seminar & Exhibition on Non-Destructive Evaluation, December 10-12, 2009, Trichy.

Parida, N (2009) Non Destructive Testing and Evaluation. In: A Continuing Education Course on Metallurgy for Engineers, December 14-16, 2009, NML, Jamshedpur.

Tarafder, S and Sivaprasad, S (2009) Component Integrity Evaluation. In: Metallurgy for Engineers, December 14-16, 2009, NML, Jamshedpur.

Project Reports

Rajnikanth, V and Munda, Parikshit and Mandal, D and Minj, R K and Das, Swapan K and Ghosh Chowdhury, S and Singh, S R (2009) Development and Evaluation of Wear Resistant Material. Exploratory (OLP). NML, Jamshedpur. (Submitted)

Thesis

Saha, Sraboni (2009) Does the antibacterial activity of silver depends on its particle size. Masters thesis, CSIR-National Metallurgical Laboratory (NML).

Sinha, Vibhash Chandra (2009) Biomimetic hydroxyapatite coating on titanium alloys for biomedical application. Masters thesis, CSIR-National Metallurgical Laboratory (NML).