Items where Division is "Material Science and Technology" and Year is 2000

C

Chaudhuri, S and Roy, Nilima and Ghosh, R N (2000) Stress rupture ductility diagram - A diagnostic tool. ISIJ International, 40 (2). pp. 207-210.

D

Das, Swapan K and Ravi Kumar, B and Bhattacharya, D K and Chattoraj, I (2000) Stress corrosion cracking in an Al-bronze chlorine gas regulating valve. Engineering Failure Analysis, 7 (4). pp. 229-237.

G

Ghosh Chowdhury, S and Jena, A K and Ray, R K (2000) Recovery and ordering in cold-rolled boron-doped Ni76Al24. Metallurgical and Materials Transactions A, 31 (9). pp. 2127-2134.

Ghosh Chowdhury, S and Ray, R K and Jena, A K (2000) Texture evolution during recrystallization in a boron-doped Ni76Al24 alloy. Materials Science and Engineering A, 277 (1-2). pp. 1-10.

K

Kumar, P and Murthy, G V S (2000) Ultrasonic evaluation of double poured rolls. NDT & E International, 33 (1). pp. 43-45.

P

Padhi, K K (2000) Evaluation and improvement of X-ray emission analysis for the recovery values of baryte waste. Journal of Metallurgy and materials Science, 42 (4). pp. 255-267.

Panda, A K and Chattoraj, I and Mitra, A (2000) Structural and soft magnetic properties of Fe73.5Nb3M1Si13.5B9 (M=Cu, Mn, Pt). Journal of Magnetism and Magnetic Materials, 222 (3). pp. 263-270.

Pathak, L C and Singh, T B and Verma, A K and Ramachandrarao, P (2000) Synthesis of nano-crystalline alumina powder by Sol-gel Process. Journal of Metallurgy and materials Science, 42 (2). pp. 93-104.

Pramanick, A K (2000) Effect of composition on the streaking and diffuse intensity in decagonal phase in Al70−XCo15CuXCY Ni15−Y system. Materials Science and Engineering, 294-296 . pp. 173-177.

Pramanick, A K and Mukhopadhyay, N K (2000) Aperiodic-2000. Current Science, 79 (12). pp. 1637-1643.

R

Ramachandrarao, P (2000) Solidification of silver–germanium alloys under microgravity conditions. Current Science, 79 (3). pp. 326-327.

Ramachandrarao, P and Sinha, Arvind and Sanyal, D (2000) On the fractal nature of Penrose tiling. Current Science, 79 (3). pp. 365-366.

Ravi Kumar, B and Bhattacharya, D K and Das, Swapan K and Ghosh Chowdhury, S (2000) Premature fatigue failure of a spring due to quench cracks. Engineering Failure Analysis, 7 (6). pp. 377-384.

Ray, A K and Tiwari, Y N and Sinha, R K and Roy, S K and Singh, R and Chaudhuri, S (2000) Mechanical Property Evaluation and Remaining Life Assessment of Service - Exposed Steam Pipe of Boilers in : Thermal Power Plant. High Temperature Materials and Process, 20 (1). pp. 1-12.

Ray, Ashok K (2000) Failure mode of thermal barrier coatings for gas turbine vanes under bending. International Journal of Turbo & Jet-engines, 17 (1). pp. 1-24.

Ray, Ashok K and Bandopadhyay, A and Srikanth, S and Das, S K and Antony, M P and Jha, Animesh (2000) Physico-chemical investigations on the sintering behaviour of red mud - flue dust composites. In: Processing of fines: International symposium, November 2-3, 2000, NML Jamshedpur, India.

Ray, Ashok K and Mishra, K K and Das, Goutam and Chaudhary, P N (2000) Life of rolls in a cold rolling mill in a steel plant-operation versus manufacture. Engineering Failure Analysis, 7 (1). pp. 55-67.

Ray, Ashok K and Tiwari, Y N and Chaudhuri, S (2000) Evaluation of mechanical properties and assessment of residual life of a service-exposed water wall tube. Engineering Failure Analysis, 7 (6). pp. 393-402.

Ray, Ashok K and Tiwari, Y N and Chaudhuri, S and Tarafder, S and Singh, R (2000) Residual life assessment of FCCU reactor plate. Transactions of the Indian Institute of Metals, 53 (3). pp. 427-433.

Ray, Ashok K and Tiwari, Y N and Singh, R and Tarafder, S (2000) Prediction of remaining life of a FCCU reactor plate. Engineering Failure Analysis, 7 (2). pp. 75-86.

Ray, Ashok K and Tiwari, Y N and Sinha, R K and Chaudhuri, S and Singh, R (2000) Residual life prediction of service exposed main steam pipe of boilers in a thermal power plant. Engineering Failure Analysis, 7 (5). pp. 359-376.

S

Singh, K K (2000) Refractories for iron and steel making: Recent trends and future prospects. Journal of Metallurgy and materials Science, 42 (2). pp. 75-79.

Singh, Raghubir (2000) A mechanism based approach for remaining life assessment of components exposed to prolonged creep. Transactions of the Indian Institute of Metals, 53 (3). pp. 175-183.

Sinha, Arvind and Das, S K and Rao, Venkatesh and Ramachandrarao, P (2000) Synthesis of organized inorganic crystal assemblies. Current Science, 79 (5). pp. 646-648.

Sinha, Arvind and Das, Swapan K and Ravi Kumar, B and Chakraborty, S and Rao, Venkatesh and Ramachandrarao, P (2000) Polymer-Mediated Synthesis of Fine-Sized Cobalt Particles. Journal of Materials Synthesis and Processing, 8 (2). pp. 109-113.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Ray, K K (2000) Effect of prestrain on fracture toughness of HSLA steels. Materials Science and Engineering A, 284 (1-2). pp. 195-201.

Sivaprasad, S and Tarafder, S and Ranganath, V R and Ray, K K (2000) Fatigue crack growth studies on Cu-strengthened HSLA steels in Air and in simulated sea water. Transaction of the Indian Institute of Metals, 53 (3). pp. 333-339.

Sivaprasad, S and Tarafder, S and Tarafder, Mita and Ray, K K (2000) An alternative method of decreasing ΔK FCGR testing. International Journal of Fatigue, 22 (7). pp. 593-600.

Sridhar, G and Iyer, V Rama and Rao, V Rama Krishna (2000) Electro Slag cladding of Dissimilar steels and study of the bond interface (OLP-12731). Exploratory (OLP). National Metallurgy Laboratory, Jamshedpur, Jamshedpur. (Submitted)