Items where Division is "Material Science and Technology" and Year is 1998

AL-Jarrah, J A and Ghosh, P K and Ray, S (1998) Mixing & solidification Processing of AI-AI2o3 Composite. In: UNSPECIFIED.

Bahadur, Aruna (1998) Development and evaluation of a low chromate corrosion inhibitor for cooling water systems. Canadian Metallurgical Quarterly, 37 (5). pp. 459-468.

Bahadur, Aruna (1998) Partial substitution of chromate by borate for cooling water inhibition. ISIJ International, 38 (5). pp. 469-473.

Bahadur, Aruna (1998) Study of Film Growth on Copper in Chromate Solution by a Radioactive Tracer Technique. Journal of Materials Science Letters, 17 (8). pp. 701-704.

Bahl, O P and Mathur, R B and Dwivedi, Hariom (1998) Correlation between the Surface Energetics of Reinforcement and Mechanical Properties of Carbon/Carbon Composites. In: UNSPECIFIED.

Biswas , P K and Dev, S C and Krishnan, C S S (1998) Some Critical Issues in the Processing of Magnesium Alloys & Composites. In: UNSPECIFIED.

Chattoraj, I and Mitra, A (1998) Structure-electrochemical correlations in amorphous and devitrified Fe-based ferromagnetic alloys. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Chaudhuri, S and Ghosh, R N (1998) Some aspects of mechanisms and modelling of creep behaviour of 2.25Cr-1Mo steel. ISIJ International, 38 (8). pp. 881-887.

Datta, S and Deb, P and Bandyopadhyay, N R and Banerjee, M K (1998) Reinforcing age Hardenable Al-Cr Matrix Alloy In-Situ and by SiC/Al2O3. In: UNSPECIFIED.

Ghosh, S and Das, S K (1998) Carbide Morphology Observations in Rare-Earth-Treated Fe-Al-Si-C Alloys. Materials Characterization, 41 (5). pp. 217-221.

Ghosh Chowdhury, S and Jena, A K and Ray, R K (1998) Recrystallization behavior of boron-doped Ni76Al24. Metallurgical and Materials Transactions A, 29 (12). pp. 2893-2902.

Ghosh Chowdhury, S and Mukhopadhyay, N K and Das, Goutam and Das, Swapan K and Bhattacharya, D K (1998) Failure analysis of aweld repaired steam turbine casing. Engineering Failure Analysis, 5 (3). pp. 205-218.

Ghosh Chowdhury, S and Ray, R K and Jena, A K (1998) Rolling texture in the intermetallic compound Ni76Al24(B). Materials Science and Engineering A, 246 (1-2). pp. 289-301.

Hegde, L and Prasad, S N (1998) Formability of Metal-Matrix Composite based on Aluminium Alloy 6061 - Reinforced with Silicon Carbide Particulars. In: UNSPECIFIED.

Jaleel, V A and Panda, P K and Kannan, T S (1998) Evaluation of Mechanical Properties of SiC Whisker Reinforced In-Situ Composites Prepared by Carbothermal Reduction of Silicate Minerals. In: UNSPECIFIED.

Kumar, Pravesh (1998) Effect of fillers on acousto ultrasonic response in GRP composites. Bulletin of Materials Science, 21 (1). pp. 93-97.

Kumar, Sanjay and Singh, K K (1998) Development of Corundum/Mullite Composites from fly Ash & Alumina Mix by Reaction Sintering. In: UNSPECIFIED.

Kumar, Surendra and Pradhan, B (1998) Three-Dimensional Finite Element Analysis of Composite Laminates Subjected to Transverse Impact. In: UNSPECIFIED.

Maity, P C and Panigrahi, S C (1998) Production of Aluminium Matrix In - Situ Particulate Copmosites. In: UNSPECIFIED.

Mallick, B and Maity, P C and Sinha, V K (1998) Production of Aluminium-Silicon Carbide Cast Particle Composites Without Magnesium. In: UNSPECIFIED.

Mishra, Suman K and Ranganathan, S and Das, Swapan K and Das, Samar (1998) Investigations on precipitation characteristics in a high strength low alloy (HSLA) steel. Scripta Materialia, 39 (2). pp. 235-259.

Mitra, A and Palit Sagar, S and Chattoraj, I (1998) Crystallization and magnetic behaviour of Fe-Nb-Cu-Si-B alloys. Philosophical magazine b-physics of condensed matter statistical mechanics electronic optical and magnetic properties, 77 (6). pp. 1681-1691.

Mukhopadhyay, N K and Ghosh Chowdhury, S and Das, Goutam and Chattoraj, I and Das, S K and Bhattacharya, D K (1998) An investigation of the failure of low pressure steam turbine blades. Engineering Failure Analysis, 5 (3). pp. 181-193.

Pal, B C and Pillai, R M and Satyanarayana, K G (1998) Light Metal Matrix Composites - Present Status & Future Strategies. In: UNSPECIFIED.

Panda, P K and Mariappan, L and Kannan, T S (1998) Preparation of Al2O3 - SiC In-Situ Composite Powder Mixtures by Carbothermal Reduction of Kaolinite. In: UNSPECIFIED.

Pandey, A K and Debnath, K K and Setua, D K and Mathur, G N and Chandra, R (1998) Butyl Rubber-Nylon Composites with Improved Flame Retardancy & Gas Impermeability. In: UNSPECIFIED.

Pandey, J L and Banerjee, M K (1998) Concrete corrosion and control practices - an overview. Anti-corrosion methods and materials, 45 (1). 5 - .

Pandey, J L and Banerjee, M K (1998) Energy conservation with the use of solar selective coatings. Anti-corrosion methods and materials, 45 (1). 16- .

Pandey, P K and Dash, R R and Singh, M P (1998) Studies on the In-Situ Formation of AI2O3 - SiC Ceramic Matrix Composite from Tata Steel Colliery over Burden. In: UNSPECIFIED.

Parida, N and Ravi Kumar, B and Bhattacharya, D M (1998) Fatigue damage assessment and detection of onset of crack initiation by x-ray diffraction. Transactions of the Indian Institute of Metals, 51 (2-3). pp. 175-177.

Pathak, L C and Mishra, Suman K and Srikanth, S (1998) Effect of Silver on the Sintering Characteristics of High T Ceramic Superconductors. In: Proceedings of Composite Materials, March, 1998, NML Jamshedpur, India.

Pathak, P N and Rafiuddin, S (1998) Recovery of barite from complex sulphide ores. Metals Materials and Processes, 10 (2). pp. 189-191.

Pradhan, B and Chakraborty, D (1998) Delamination Initiation at the Interface of Broken & Continuous Plies In FRP Composite Laminates. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 206-213.

Pradhan, B and Kumar, N Venu and Rao, N S (1998) Modelling of Multiple Transverse Cracks In Angle - Ply Laminates. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 224-232.

Pradhan, S K and Dwarakadasa, E S (1998) Processing & Characterization of UHMWPE-CSP (Coconut Shell Powder) Composite. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 283-287.

Prasad, B K and Venkateswarlu, K and Modi, O P and Jha, A K and Das, S and Dasgupta, R and Yegneswaran, A H (1998) Sliding wear behavior of some Al-Si alloys: Role of shape and size of Si particles and test conditions. Metallurgical and Materials Transactions A, 29 (11). pp. 2747-2752.

Prasad, S N and Navale, N G and Panda, S (1998) A Study on Impact Resistance of Glass Fibre Reinforced Vinylester Composites against ballistic Projectiles. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 246-253.

Prasad, V V S and Rao, A S and Prakash, U and Rao, V R and Rao, P K and Gupt, K M (1998) Alumina addition to fluoride slags for recycling of low oxygen high conductivity copper scrap through electroslag crucible melting. ISIJ International, 38 (12). pp. 1387-1389.

Prasad, V V S and Rao, A S and Prakash, U and Rao, Venkatesh and Rao, P K and Gupt, K M (1998) Effect of process variables on electroslag crucible melting of copper-chromium alloys. ISIJ International, 38 (12). pp. 1390-1392.

Puvvada, G V K and Yedavalli, B V S and Rao, A S (1998) Solvent extraction of gallium from Bayer Process liquor (Indal, Muri) using 7-alkyl-substituted-8-hydroxyquinoline (Kelex-100). Transactions of the Indian Institute of Metals, 51 (4). pp. 223-225.

Radhakrishna Bhat, B V and Somaraju, K and Venkataraman, B and Bhanuprasad, V V (1998) Metal Matrix Composites as Potential Armour Materials. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 103-115.

Rajeswari, S and Jayakumar, T and Rao, C B and Bhattacharya, D K and Raj, B (1998) Residual stress measurement in ferritic steel tube welds using X-ray diffraction. Science and technology of welding and joining, 3 (4). pp. 204-207.

Rao, V V (1998) Prepararion of Al2O3 ceramic matrix in-situ composites by reactive melt penetration. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 132-136.

Ray, Ajoy K and Mandal, S and Das, S K and Krishnan, C S S (1998) Low Cost In-Situ Formation of AIN - B- SiC. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 151-159.

Ray, Ashok K (1998) A new technique for precracking ceramic specimens in fatigue and fracture. Journal of the European Ceramic Society, 18 (12). pp. 1655-1662.

Ray, Ashok K and Tiwari, Y N and Sinha, A N and Sinha, R K and Singh, R and Chaudhuri, S (1998) Life prediction of service exposed reactor and distillation column materials used in a petrochemical industry. Engineering Failure Analysis, 5 (4). pp. 289-298.

Ray, B C and Hassan, S T and Clegg, D W (1998) Effects of Thermal Shock on Mechanical Behaviour of Kevlar Fibre Composites. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 214-223.

Sharma, S C and Girish, B M and Kamath, Rathnakar and Satish, B M (1998) An Evaluation of the sliding Wear Behaviour of SiC Particles Reinforced Copper Alloy Composite Materials. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 72-82.

Shukla, M K and Nigam, Vineeta and Singh, Harjeet and Setua, D K and Mathur, G N (1998) Lignin Reinforced Rubber Composites. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 233-245.

Sing, S B and Ray, S and Gupta, R K and Bhatnakar, N S (1998) Influence of Anisotropy on Creep in a Whisker Reinforced MMC Rotating Disc. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 83-102.

Singh, Inder and Mukherjee, A N (1998) Corrosion of tinned sheets during transportation - A case study. In: International Conference on Corrosion (CORCON 97), Dec 03-06, 1997, Nehru Ctr, Mumbai, India.

Sinha, P K (1998) Modern Composites - A Renascent Material System. In: Proceedings of Composite Materials. NML, Jamshedpur, India, Jamshedpur, pp. 1-8.