Items where Division is "Material Science and Technology" and Year is 1994

Bahadur, Aruna and Mohanty, O N (1994) Structure-property correlation in aluminized coatings. NML Technical Journal, 36 (1). pp. 31-38.

Banerjee, P K (1994) An Overview of Manufacturing Methods of Tin Hell Buck Plate ('IMBP) and its Quality Requirements. In: Tailoring of Properties through Mechanical Processing, 23-24, September 1994, NML, Jamshedpur.

Biswas , P K (1994) Tailoring of Properties through Squeeze Castic Technique. In: Tailoring of Properties through Squeeze Casting Technique, 23-24, September 1994, NML, Jamshedpur.

Dev, S C (1994) Roll - Claddim - A IC11-10D of Improving Properties of Materials. In: Tailoring of Properties through Mechanical Processing, 23-24, September 1994, NML, Jamshedpur.

Dev, S C and Mohanty, O N (1994) Rapidly solidified low-silver brazing filler alloy foils. Journal of Materials Science, 29 (23). pp. 6329-6334.

Director, NML (1994) Tailoring of Properties through Mechanical Processing. In: Tailoring of Properties through Mechanical Processing. NML, Jamshedpur, Jamshedpur.

Dogan , Ali (1994) A Phase Stability Model for Martensite Transformation. NML Technical Journal, 36 (2). pp. 39-45.

Gaur, B and Singh, A K and Rao , N J (1994) Corrosion of mild-steel in hypochlorite solution - an electrochemical and weight-loss study. Indian Journal of Chemical Technology, 1 (4). pp. 225-229.

Ghosh, B N and Das, N K (1994) Thermomechanical Processing for Tailoring Properties in Steels. In: Tailoring of properties through Mechanical Processing, 23-24, September 1994, NML, Jamshedpur.

Ghosh, R N (1994) Modeling high-temperature creep of anisotropic material. Bulletin of Materials Science, 17 (7). pp. 1341-1350.

Ghosh, R N and Chaudhuri, S (1994) Creep strain prediction of 2-1/4-cr-1mo steel - a model-based approach. Bulletin of Materials Science, 17 (6). pp. 663-670.

Godiwalla, K M and Sinha, S K and Sivaramakrishnan, C S (1994) Statistical analysis of residence time distribution of fluid elements in continuous casting water model tundish with one side entry. 77th steelmaking conference, 77 ( ). pp. 703-712.

Gupta, T K S P and Nasar, A and Shamsuddin, M and Ramachandrarao, P (1994) Thermodynamic investigations of liquid-Te-saturated CdTe—ZnTe solid solutions. Thermochimica Acta, 247 (2). pp. 415-429.

Joarder, A (1994) On the bainite structure in Cr-Mo-V rotor steel. Steel Research, 65 (8). pp. 345-349.

Krishnarao, R V and Godkhindi, M M and Chakraborty, M and Mukunda, P G (1994) Formation of sic whiskers from compacts of raw rice husks. Journal of Materials Science, 29 (10). pp. 2741-2744.

Kutumbarao, V V and Rajagopalachary, T (1994) Hot Workability and Processing Maps. In: Tailoring of properties through Mechanical Processing, 23-24, September 1994, NML, Jamshedpur.

Lal, Kishori and Dev, S C (1994) Processing of Non-ferrous Alloys through Extrustion. In: Tailoring of properties through Mechanical Processing, 23-24, September 1994, NML, Jamshedpur.

Lunawat, C B and Todi, V N (1994) Technology of Steel Tube Making. In: Tailoring of Properties through Mechanical Processing, 23-24, September 1994, NML, Jamshedpur.

Mehrotra, S P and Singh, Ratnakar (1994) Role of froth processes on flotation. Metals Materials and Processes, 6 (3). pp. 195-216.

Mitra, A and Rao, Venkatesh and Mohanty, O N and Ghatak, S K (1994) Magnetic-behavior of amorphous fe40ni40b20 alloy treated isothermally below crystallization temperature. Materials Transactions JIM, 35 (2). pp. 108-111.

Mitra, N (1994) Role of Indian Standards in Tailoring the properties of Wrought Steels. In: Tailoring of Properties through Mechanical Processing, 23-24, September 1994, NML, Jamshedpur.

Pandit, S (1994) Quality Aspects of Special Forgings of Low Alloy Steels. In: Tailoring of Properties through Mechanical Processing, 23-24, September 1994, NML, Jamshedpur.

Prasad, R S and Lele, S (1994) Stabilization of the amorphous phase inside carbon nanotubes - solidification in a constrained geometry. Philosophical Magazine Letters Online ISSN 1362-3036, 70 (6). pp. 357-361.

Ram, S (1994) Kinetics of the desorption of interstitial hydrogen in stable Nd2Fe14BHx, x-less-than-or-equal-to-5. Physical Review B (PRB), 49 (14). pp. 9632-9638.

Rao, V (1994) Mechanical Processing in Magnetic Materials. In: Tailoring of properties through Mechanical Processing, 23-24, September 1994, NML, Jamshedpur.

Ray, Ashok K and Banerjee, S and Fuller, E R and Das, Swapan K (1994) Fractography as well as fatigue and fracture of 25-wt-percent silicon-carbide whisker-reinforced alumina ceramic composite. Bulletin of Materials Science, 17 (6). pp. 893-910.

Sen, S K and Banerjee, N L (1994) A new technique of decomposition of chrome ores for subsequent determination of Al, Fe, Ca and Mg. NML Technical Journal, 36 (1). pp. 25-30.

Sengupta, P L and Sinha, P K and Aush, S C (1994) Removal of potassium from the electrolyte in the production process for electrolytic manganese-dioxide. Transactions of the Indian Institute of Metals, 47 (5). pp. 339-341.

Shamsuddin, M and Gupta, T K S P and Nasar, A and Ramachandrarao, P (1994) Thermodynamic behaviour of zinc and cadmium in liquid-Te-saturated CdTe---ZnTe solid solutions. Thermochimica Acta, 246 (1). pp. 213-227.

Sharma, S R (1994) Forging Technology - As Applied to Automobile Industry. In: Tailoring of Properties through Mechanical Processing, 23-24, September 1994, NML, Jamshedpur.

Singh, M P (1994) Super-Plastic forming of Metals. In: Tailoring of properties through Mechanical Processing, 23-24, September 1994, NML, Jamshedpur.

Singhal, Umesh (1994) Roll Qualities and Economic Utilisation of Rolls. In: Tailoring of Properties through Mechanical Processing, 23-24, September 1994, NML, Jamshedpur.

Sinha, A N and Parida, N and Das, S and Mohanty, O N (1994) Low cycle fatigue failure of pressurised storage tank. NML Technical Journal, 36 (2). pp. 65-81.

Sinha, A N and Sivaramakrishnan, C S (1994) Failure of work roll of cold-rolling mill. Ironmaking & Steelmaking, 21 (2). pp. 154-157.

Tarafder, S and Ranganath, V R and Tarafder, Mita (1994) Development of fracture mechanics expression by finite element analysis. NML Technical Journal, 36 (4). pp. 145-155.

Tarafder, S and Tarafder, Mita and Ranganath, V R (1994) Compliance crack length relations for the four-point bend specimen. Engineering Fracture Mechanics, 47 (6). pp. 901-907.

Viswanathan, M (1994) Wire Drawing - Influence of Manufacturing Practice on Wire Quality. In: Tailoring of Properties through Mechanical Processing, 23-24, September 1994, NML, Jamshedpur.