Items where Author is "Srivastava, V C"

Article

Sahoo, Biraj K and Walunj, M G and Srivastava, V C and Pais, R and Pathak, L C and Mandal, G K (2024) Elimination of Wettability Issues in Interstitial Free High Strength (IFHS) Steel by Controlling the Annealing Atmosphere. Transactions of The Indian Institute of Metals .

Kar, Shubhada and Srivastava, V C and Mandal, G K (2023) Low-density nano-precipitation hardened Ni-based medium entropy alloy with excellent strength-ductility synergy. Journal of Alloys and Compounds, 963 .

Shivam, V and Kar, S and Mandal, G K and Srivastava, V C (2023) Microstructural evolution and phase selection during solidification of AlCrCuFeNi high entropy alloy. Journal of Alloys and Compounds, 963 .

Kumar, Amritesh and Sarma, Ritam and Bag, Swarup and Srivastava, V C and Kapil, Sajan (2023) Physics-informed machine learning models for the prediction of transient temperature distribution of ferritic steel in directed energy deposition by cold metal transfer. Science and Technology of Welding and Joining, 28(9) . pp. 914-922.

Kar, Shubhada and Meena, L K and Srivastava, V C and Mandal, G K (2023) Microstructural, Mechanical, and Corrosion Behaviour of Ni-Fe-Cr-Al and Ni-Fe-Cr-Al-Co Alloys. Transactions of the Indian Institute of Metals .

Shivam, V and Kar, S and Bansal, G K and Chandan, A K and Sahoo, Biraj K and Mandal, G K and Mukhopadhyay, N K and Srivastava, V C (2023) A novel Fe-rich non-equiatomic medium-entropy alloy with superior mechanical properties. Journal of Alloys and Compounds, 952 .

Dutt, A K and Bansal, G K and Tripathy, S and Krishna, K Gopala and Srivastava, V C and Chowdhury, S G (2022) Optimization of Selective Laser Melting (SLM) Additive Manufacturing Process Parameters of 316L Austenitic Stainless Steel. Transactions of the Indian Institute of Metals .

Sahoo, Biraj K and Srivastava, V C and Chandan, A K and Chowdhury, S G (2022) Enhancing the properties of Al-Ni added medium Mn steel by tailoring B2-NiAl precipitates through aging treatment. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 837 .

Bansal, G K and Tripathy, S and Chandan, A K and Rajinikanth, V and Ghosh, C and Srivastava, V C and Chowdhury, S G (2021) Influence of quenching strategy on phase transformation and mechanical properties of low alloy steel. Materials Science and Engineering: A, 826, article no. 141937 (5.23). pp. 1-15.

Sahoo, Biraj K and Srivastava, V C and Chandan, A K and Chhabra, H S and Chowdhury, S G (2021) Evolution of microstructure and deformation behavior in Al–Ni added medium-Mn steel processed through intercritical / cold rolling and annealing. Materials Science and Engineering A, 824 .

Sahoo, Biraj K and Srivastava, V C and Mahato, B and Ghosh Chowdhury, S (2021) Microstructure-mechanical property evaluation and deformation mechanism in Al added medium Mn steel processed through intercritical rolling and annealing. Materials Science and Engineering A, 799 (IF-). p. 140100.

Bansal, G K and Chandan, A K and Ghosh, C and Srivastava, V C and Dutta, Monojit and Ghosh Chowdhury, S (2021) The Pros and Cons of an Energy-Efficient Q&P Approach to Develop Advanced Steels. Next Generation Materials and Processing Technologies, Part of the Springer Proceedings in Materials book series (SPM, volume 9) . pp. 15-26.

Bansal, G K and Chandan, A K and Srivastava, V C and Gopalakrishna, K and Das, Goutam and Rajkumar, S and Ghosh Chowdhury, S and Tarafder, S (2021) Studies on Tensile Behaviour of Selective Laser Melted 316L Stainless Steel Using SEM Straining Stage. Transactions of the Indian National Academy of Engineering . pp. 1-11.

Ali, Rashid and Akhtar, Muhammad Umair and Zahoor, Aqib and Ali, Fahad and Scudino, Sergio and Shahid, Rub Nawaz and Tariq, Naeem ul Haq and Srivastava, V C and Uhlenwinkel, V and Hasan, B A and Eckert, J (2020) Study of thermal and structural characteristics of mechanically milled nanostructured Al-Cu-Fe quasicrystals. Materials Chemistry and Physics, 251 (IF-3.408). p. 123071.

Bansal, G K and Rajnikanth, V and Ghosh, Chiradeep and Srivastava, V C and Dutta, Monojit and Ghosh Chowdhury, S (2020) Effect of cooling rate on the evolution of microstructure and mechanical properties of nonisothermally partitioned steels. Materials Science and Engineering: A, 788 (IF-4.652). p. 139614.

Bansal, G K and Chandan, A K and Mandal, G K and Srivastava, V C (2020) High Entropy Alloys: An Overview on Current Developments" in the book "High Entropy Alloys: Innovations, Advances, and Applications. High Entropy Alloys: Innovations, Advances, and Applications (Book). pp. 1-68.

Bansal, G K and Junior, L P and Ghosh, C and Rajnikanth, V and Tripathy, S and Srivastava, V C and Bhagat, A N and Chowdhury, S G (2020) Quench Temperature-Dependent Phase Transformations During Nonisothermal Partitioning. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials, 51(7) (IF-2.050). pp. 3410-3224.

Peter, Nicolas J and Duarte, Maria J and Liebscher, Christian H and Srivastava, V C and Uhlenwinkel, Volker and Jägle, Eric A and Dehm, Gerhard (2020) Early stage phase separation of AlCoCr0.75Cu0.5FeNi high-entropy powder at the nanoscale. Journal of Alloys and Compounds, 820 . p. 153149.

Bansal, G K and Jena, P S M and Ghosh, C and Srivastava, V C and Rajnikanth, V and Dutta, Monojit and Ghosh Chowdhury, S (2020) Quench Temperature-Dependent Mechanical Properties During Nonisothermal Partitioning. Metallurgical and Materials Transactions A, 51A (IF-2.050). pp. 5088-5100.

Bansal, G K and Srivastava, V C and Ghosh Chowdhury, S (2019) Role of solute Nb in altering phase transformations during continuous cooling of a low-carbon steel. Materials Science and Engineering: A, 767 (IF-4.081). p. 138416.

Bansal, G K and Pradeep, M and Ghosh, C and Rajnikanth, V and Srivastava, V C and Bhagat, A N and Kundu, S (2019) Evolution of Microstructure in a Low-Si Micro-alloyed Steel Processed Through One-Step Quenching and Partitioning. Metallurgical and Materials Transactions A , 50(2) (IF-1.985). pp. 547-555.

Mandal, G K and Ashok, K and Das, S K and Biswas, S K and Sarkar, R B and Bharathy, R S and Srivastava, V C (2018) Development of Stretch Flangeable Grade Steels by Inclusion Engineering Approach. Journal Of Materials Engineering And Performance, 27(11) (IF-1.094). pp. 5622-5634.

Bansal, G K and Rajnikanth, V and Ghosh, C and Srivastava, V C and Kundu, S and Ghosh Chowdhury, S (2018) Microstructure–Property Correlation in Low-Si Steel Processed Through Quenching and Nonisothermal Partitioning. Metallurgical and Materials Transactions A, 49(8) (IF-1.985). pp. 3501-3514.

Naseema, S and Gaurav, B and Ghosh, M and Das, Goutam and Srivastava, V C and Srinivas , Rao K and Gopalakrishna, K (2018) TEM Analysis of Precipitates in a Low Alloy Wear Resistant Steel and Correlating with its Corrosion Behaviour. Advanced Materials Research, 1148 (1148). pp. 75-81.

Kumar, Sunil and Mandal, G K and Rajnikanth, V and Misra, S and Ghosh Chowdhury, S and Srivastava, V C (2018) Effect of cooling media on microstructure and mechanical properties of Nb/Ti containing microalloyed steel. Journal of Metallurgy and Materials Science, 60(1) . pp. 1-12.

Bansal, G K and Madhukar, D A and Chandan, A.K. and Ashok, K and Mandal, G K and Srivastava, V C (2018) On the intercritical annealing parameters and ensuing mechanical properties of low-carbon medium-Mn steel. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 733 (IF-4.081). pp. 246-256.

Kanta, P Laxman Mani and Srivastava, V C and Venkateswarlu, K and Paswan, S and Mahato, B and Das, Goutam and Sivaprasad, K and Krishna, K Gopala (2017) Corrosion behavior of ultrafine-grained AA2024 aluminum alloy produced by cryorolling. International Journal of Minerals, Metallurgy, and Materials, 24(11) (IF- 0.943). pp. 1293-1305.

Ghosh, M and Bansal, Gourav and Chandan, A and Shah, Minal and Tripathy, S and Murugaiyan, Premkumar and Sahoo, Biraj and Mukherjee, K and Srivastava, V C and Ghosh Chowdhury, S (2017) Functionally Driven Steels: A Review. Steel Tech, 12(1) (NonSCI). pp. 13-36.

Mandal, G K and Kumar, Sudhir and Kumar, Tipu and Srivastava, V C (2017) Hot Deformation Behaviour of a Nb-Mo Linepipe Steel. Transaction of the Indian Institute of Metals, 70(7) (IF-0.533). pp. 1943-1951.

Kumar, Sunil and Srivastava, V C and Mandal, G K and Pattanayek, S K and Sahoo, K L (2017) Single-Walled Carbon Nanotube Engendered Pseudo-1D Morphologies of Silver Nanowire. Journal of Physical Chemistry C, 121 (IF-4.536). pp. 20468-20480.

Mandal, G K and Rajnikanth, V and Kumar, S and Mishra, D and Misra, S and Srivastava, V C and Ghosh Chowdhury, S (2017) Microstructure Evolution During Hot Deformation of a Micro-Alloyed Steel. Transactions of the Indian Institute of Metals, 70(4) (IF 0.533). pp. 1019-1033.

Goudar, D M and Srivastava, V C and Rudrakshi, G B (2017) Effect of Atomization Parameters on Size and Morphology of Al-17Si Alloy Powder Produced by Free Fall Atomizer. Engineering Journal, 21(1) (IF-0.384). pp. 155-168.

Srivastava, V C and Mandal, G K and Ciftci, N and Uhlenwinkel, V and Madler, L (2017) Processing of High-Entropy AlCoCr0.75Cu0.5FeNi Alloy by Spray Forming. Journal Of Materials Engineering And Performance, 26/12 (IF- 1.331). pp. 5906-5920.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2016) Inverse Hall-Petch like behaviour in a mechanically milled nanocrystalline Al5Fe2 intermetallic phase. Philosophical Magzine, 96(23) (IF-1.350). pp. 2445-2456.

Mukhopadhyay, N K and Uhlenwinkel, V and Srivastava, V C (2015) Synthesis and Characterization of Bulk Al-Cu-Fe Based Quasicrystals and Composites by Spray Forming. Journal of materials engineering and performance, 24(6) (IF-0.98). pp. 2172-2178.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2015) Comparative Studies on Al-Based Composite Powder Reinforced with Nano Garnet and Multi-wall Carbon Nanotubes. Journal of Materials Engineering and Performance, 24(11) (IF-0.998). pp. 4200-4205.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2015) Effect of Milling Time on Structural Evolution and Mechanical Properties of Garnet Reinforced EN AW6082 Composites. Metallurgical and Materials Transaction A, 46A(3) (IF-1.730). pp. 1360-1373.

Goudar, D M and Srivastava, V C and Rudrakshi, G B and Raju, K and Ojha, S N (2015) Effect of Tin on the Wear Properties of Spray Formed Al–17Si Alloy. http://link.springer.com/article/10.1007%2Fs12666-015-0573-1, 68 (IF-0.615). pp. 3-7.

Prashanth, K G and Shahabi, H S and Attar, H and Srivastava, V C and Eckert, J and Scudino, S and Uhlenwinkel, V and Ellendt, N (2015) Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting. Additive Manufacturing, 6 . pp. 1-5.

Basariya, M R and Roy, Rajat K and Pramanick, A K and Srivastava, V C and Mukhopadhyay, N K (2015) Structural transition and softening in Al-Fe intermetallic compounds induced by high energy ball milling. Materials science and engineering a-structural materials properties microstructure and processing, 638 (IF-2.567). pp. 282-288.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2014) Microstructural characteristics and mechanical properties of carbon nanotube reinforced aluminum alloy composites produced by ball milling. Materials & Design, 64 (IF-3.171). pp. 542-549.

Ali, F and Scudino, S and Anwar, M S and Shahid, R N and Srivastava, V C and Uhlenwinkel, V and Stoica, M and Vaughan, G and Eckert, J (2014) Al-based metal matrix composites reinforced with Al-Cu-Fe quasicrystalline particles: Strengthening by interfacial reaction. Journal of Alloys and Compounds, 607 (IF-2.407). pp. 274-279.

Srivastava, V C and Ellendt, N and Meyer, C and Uhlenwinkel, V (2014) Bulk synthesis of amorphous and nano-crystalline materials by spray forming. Materialwissenschaft und Werkstofftechnik, 45(8) (IF-0.505). pp. 744-757.

Mukhopadhyay, N K and Ali, F and Scudino, S and Khoshkhoo, M S and Stoica, M and Srivastava, V C and Uhlenwinkel, V and Vaughan, G and Suryanarayana, C and Eckert, J (2014) Inverse Hall Petch Like Mechanical Behaviour in Nanophase Al-Cu-Fe Quasicrystals: A New Phenomenon. Acta Physica Polonica A , 126(2) (IF-0.604). pp. 543-548.

Srivastava, V C and Saarivirta, E H and Cui, C and Uhlenwinkel, V and Schulz, A and Mukhopadhyay, N K (2014) Bulk synthesis by spray forming of Al–Cu–Fe and Al–Cu–Fe–Sn alloys containing a quasicrystalline phase. Journal of Alloys and Compounds, 597 (IF-2.407). pp. 258-268.

Jindal, Vikas and Rupa, P K P and Mandal, G K and Srivastava, V C (2014) Effect of High-Temperature Severe Plastic Deformation on Microstructure and Mechanical Properties of IF Steel. Journal of Materials Engineering and Performance, 23(6) (IF-0.981). pp. 1954-1958.

Mukhopadhyay, N K and Ali, F and Scudino, S and Khoshkhoo, M S and Stoica, M and Srivastava, V C and Uhlenwinkel, V and Vaughan, G and Suryanarayana, C and Eckert, J (2013) Grain size softening effect in Al62.5Cu25Fe12.5 nanoquasicrystals. Applied Physics Letters, 103 (IF-3.79). p. 201914.

Srivastava, V C and Surreddi, K B and Scudino, S and Uhlenwinkel, V and Schowalter, M and Schulz, A and Eckert, J and Rosenauer, A and Zoch, H -W (2013) Microstructural characteristics of spray formed and heat treated Al–(Y, La)–Ni–Co system. Journal of Alloys and Compounds, 578 (IF-2.390). pp. 471-480.

Paswan, Dayanand and Mistry, D and Sahoo, K L and Srivastava, V C (2013) Development of Iron-based Closed-Cell Foams by Powder Forging and Rolling. Journal of Materials Engineering and Performance, 22(8) (IF-0.915). pp. 2201-2209.

Goudar, D M and Raju, K and Srivastava, V C and Rudrakshi, G B (2013) Effect of secondary processing on the microstructure and wear behavior of spray formed Al–30Mg 2 Si–2Cu alloy. Materials & Design, 47 (IF-2.913). pp. 489-496.

Srivastava, V C and Uhlenwinkel, V (2013) Application Oriented New Materials by Spray Forming. The Banaras Metallurgist, 18 . pp. 21-29.

Ravi Kumar, B and Madhukar, A and Srivastava, V C and Ghosh Chowdhury, S (2013) Chronology of product development at CSIR-NML. Steel Tech .

Goudar, D M and Raju, K and Srivastava, V C and Rudrakshi, G B (2013) Effect of copper and iron on the wear properties of spray formed Al–28Si alloy. Materials & Design, 51 (IF-2.913). pp. 383-390.

Ray, M K and Bagani , K and Sardar, M and Banerjee, S and Srivastava, V C and Mukhopadhyay, N K (2013) Electrical and magnetic property of Al 62 Cu 25.5 Fe 12.5 icosahedral quasicrystal: Spin-orbit scattering. AIP Conference Proceedings, 1512 . pp. 994-995.

Ali, F and Scudino, S and Gorantla, S M and Srivastava, V C and Shahid, H R and Uhlenwinkel, V and Stoica, M and Vaughan, G and Mukhopadhyay, N K and Eckert, J (2013) Mechanically driven phase transformation in single phase Al 62.5 Cu 25 Fe 12.5 quasi-crystals: Effect of milling intensity. Acta Materialia, 61 (IF-3.94). pp. 3819-3830.

Reddy, G J and Srivastava, V C and Rudrakshi, G B (2013) Wear Behavior Of Spray Formed Al–20 Mg 2 Si Alloy. International Journal of Engineering Research & Technology, 2(2) . pp. 1-9.

Srivastava, V C and Poddar, Palash and Rajnikanth, V and Sahoo, K L (2012) Light metals research - Legacy and current standing. Science & Culture, 78(11-12) . pp. 527-531.

Srivastava, V C and Singh, T and Ghosh Chowdhury, S and Jindal, Vikas (2012) Microstructural Characteristics of Accumulative Roll-Bonded Ni-Al-Based Metal-Intermetallic Laminate Composite. Journal of Materials Engineering and Performance, 21(9) . pp. 1912-1918.

Meyer, C and Ellendt, N and Srivastava, V C and Uhlenwinkel, V (2012) Cooling conditions for the generation of bulk metallic glass by droplet deposition. International Journal of Materials Research, 103(9) (IF-). pp. 1090-1095.

Goudar, D M and Rudrakshi, G B and Reddy, G J and Srivastava, V C and Wagamode , J (2012) Microstructural and hardness of spray deposited Al-30Mg2Si-2Cu alloy in solutionized and aged conditions. Materials Science : An Indian Journal, 0974-7486, 8 (8). pp. 303-308.

Ali, F and Scudino, S and Liu, G and Srivastava, V C and Mukhopadhyay, N K and Khoshkhoo, M S and Prashanth, K G and Uhlenwinkel, V and Calin, M and Eckert, J (2012) Modeling the strengthening effect of Al–Cu–Fe quasicrystalline particles in Al-based metal matrix composites. Journal of Alloys and Compounds, 536S . S130-S133.

Goudar, D M and Rudrakshi, G B and Srivastava, V C and Reddy, J and Joshi, A G (2011) Spray Deposition Process of Hypereutectic Al – Si alloys: An overview. International Journal of Scientific and Engineering Research, ISSN 2229-5518, 2 (6). pp. 1-10.

Goudar, D M and Rudrakshi, G B and Srivastava, V C (2011) Microstructures and Mechanical properties of Spray deposited and Heat-treated Al-25Mg2Si-2Cu alloy. Innovative Systems Design and Engineering, 2 (6). pp. 72-85.

Mukhopadhyay, N K and Ali, F and Srivastava, V C and Yadav, T P (2011) Strain-induced structural transformation of single-phase Al-Cu-Fe icosahedral quasicrystal during mechanical milling. Philosophical Magazine, 91 (19-21). pp. 2482-2490.

Anil, M and Srivastava, V C and Ghosh, M K and Ojha, S N (2010) Influence of tin content on tribological characteristics of spray formed Al–Si alloys. Wear, 268 (11-12). pp. 1250-1256.

Srivastava, V C and Surreddi, K B and Scudino, S and Schowalter, M and Uhlenwinkel, V and Schulz, A and Eckert, J and Rosenauer, A and Zoch, H -W (2010) Microstructure and mechanical properties of partially amorphous Al85Y8Ni5Co2 plate produced by spray forming. Materials Science and Engineering A, 527 (10-11). pp. 2747-2758.

Surreddi, K B and Srivastava, V C and Scudino, S and Sakaliyska, M and Uhlenwinkel, V and Kim, Joon-Soo and Eckert, J (2010) Production of high-strength Al85Y8Ni5Co2 bulk alloy by spark plasma sintering. Journal of Physics: Conference Series, 240 . 012155.

Srivastava, V C and Surreddi, K B and Scudino, S and Schowalter, M and Schulz, A and Rosenauer, A and Zoch, W and Eckert, J (2009) Spray forming of bulk Al85Y8Ni5Co2 with co-existing amorphous, nano- and micro-crystalline structures. Transactions of the Indian Institute of Metals, 62 (4-5). pp. 331-335.

Jindal, Vikas and Srivastava, V C and Uhlenwinkel, V (2009) On the role of liquid phase stability and GFA parameters. Journal of Non-Crystalline Solids, 355 (28-30). pp. 1552-1555.

Srivastava, V C and Rudrakshi, G B and Uhlenwinkel, V and Ojha, S N (2009) Wear characteristics of spray formed Al-alloys and their composites. Journal of Materials Science (9). pp. 2288-2299.

Srivastava, V C and surreddi, K B and Uhlenwinkel, V and Schulz, A and Eckert, J and Zoch, H -W (2009) Formation of Nanocrystalline Matrix Composite during Spray Forming of Al83La5Y5Ni5Co2. Metallurgical and Materials Transactions A, 40 (2). pp. 450-461.

Jindal, Vikas and Srivastava, V C and Ghosh, R N (2008) Development of IF steel–Al multilayer composite by repetitive roll bonding and annealing process. Materials Science and Technology, 24 (7). pp. 798-802.

Srivastava, V C and Jindal, Vikas and Uhlenwinkel, V and Bauckhage, K (2008) Hot-deformation behaviour of spray-formed 2014 Al + SiCP metal matrix composites. Materials Science and Engineering A, 477 (1-2). pp. 86-95.

Jindal, Vikas and Srivastava, V C (2008) Growth of intermetallic layer at roll bonded IF-steel/aluminum interface. Journal of Materials Processing Technology, 195 (1-3). pp. 88-93.

Srivastava, V C and Uhlenwinkel, V and Schulz, A and Zoch, H -W and Mukhopadhyay, N K and Ghosh Chowdhury, S (2008) Synthesis of single phase i-AlCuFe bulk quasicrystal by spray forming. Zeitschirft fuer Kristallographie, 223 . pp. 711-715.

Srivastava, V C and Mandal, R K and Ojha, S N and Venkateswarlu, K (2007) Microstructural modifications induced during spray deposition of Al–Si–Fe alloys and their mechanical properties. Materials Science and Engineering A, 471 (1-2). pp. 38-49.

Srinivasan, A and Ghosh Chowdhury, S and Srivastava, V C and Swaminathan, J and Poddar, Palash and De, P K (2007) Microstructural and textural evolution during large strain hot rolling (LSR) of Mg–Al (AZ31) alloy. Materials Science and Technology, 23 (11). pp. 1313-1320.

Poddar, Palash and Srivastava, V C and De, P K and Sahoo, K L (2007) Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process. Materials Science and Engineering A, 460-461 . pp. 357-364.

Rudrakshi, G B and Srivastava, V C and Ojha, S N (2007) Microstructural development in spray formed Al–3.5Cu–10Si–20Pb alloy and its comparative wear behaviour in different environmental conditions. Materials Science and Engineering A, 457 (1-2). pp. 100-108.

Srivastava, V C and Sahoo, K L (2007) Processing, stabilization and applications of metallic foams. Art of science. Materials Science - Poland, 25 (3). pp. 735-753.

Srivastava, V C and Sahoo, K L (2006) Metallic Foams : Current Status and Future Prospects. IIM Metal News, 9 (4). pp. 9-13.

Jindal, Vikas and Srivastava, V C and Das, Arpan and Ghosh, R N (2006) Reactive diffusion in the roll bonded iron–aluminum system. Materials Letters, 60 (13-14). pp. 1758-1761.

Ghosh Chowdhury, S and Srivastava, V C and Ravi Kumar, B and Soren, S (2006) Evolution of texture during accumulative roll bonding (ARB) and its comparison with normal cold rolled aluminium–manganese alloy. Scripta Materialia, 54 (9). pp. 1691-1696.

Srivastava, A K and Srivastava, V C and Gloter, A and Ojha, S N (2006) Microstructural features induced by spray processing and hot extrusion of an Al–18% Si–5% Fe–1.5% Cu alloy. Acta Materialia, 54 (7). pp. 1741-1748.

Srivastava, V C and Ojha, S N (2006) Effect of aspiration and gas–melt configuration in close coupled nozzle on powder productivity. Powder Metallurgy, 49 (3). pp. 213-218.

Srivastava, V C and Scheider, A and Uhlenwinkel, V and Bauckhage, K (2005) Spray processing of 2014-Al + SiCP composites and their property evaluation. Materials Science and Engineering A, 412 (1-2). pp. 19-26.

Sinha, I and De, P K and Srivastava, V C (2005) Mechanical working of 2124 Al alloy—SiCp cast composites. Journal of Materials Science, 40 (22). pp. 6045-6048.

Srivastava, V C and Ojha, S N (2005) Microstructure and electrical conductivity of Al-SiCp composites produced by spray forming process. Bulletin of Materials Science, 28 (2). pp. 125-130.

Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Effect of porosity and reinforcement content on the electrical conductivity of spray formed 2014-Al alloy + SiCp composites. Journal of Materials Science, 39 (22). pp. 6821-6825.

Srivastava, V C and Mandal, R K and Ojha, S N (2004) Evolution of microstructure in spray formed Al–18%Si alloy. Materials Science and Engineering A, 383 (1). pp. 14-20.

Schulz, A and Srivastava, V C and Uhlenwinkel, V and Bauckhage, K (2004) Spray forming of 2014-Al alloy based composites with injection of SiC particulates. Zeitschrift Fur Metallkunde , 95 (9). pp. 763-768.

Mukhopadhyay, N K and Kurup, Vinod and Srivastava, V C and Joshi, P B and Mandal, R K (2004) High energy ball milling of a Al65Cu20Fe15 quasicrystalline alloy. Journal of Non-Crystalline Solids, 334-335 . pp. 52-56.

Das, N N and Konar, J and Mohanta, M K and Srivastava, V C (2004) Adsorption of Cr(VI) and Se(IV) from their aqueous solutions onto Zr4+-substituted ZnAl/MgAl-layered double hydroxides: effect of Zr4+ substitution in the layer. Journal of Colloid and Interface Science, 270 (1). pp. 1-8.

Srivastava, V C and Scheider, A and Uhlenwinkel, V and Ojha, S N and Bauckhage, K (2004) Age-hardening characteristics of Cu–2.4Ni–0.6Si alloy produced by the spray forming process. Journal of Materials Processing Technology, 147 . pp. 174-180.

Lagutkin, S and Achelis, L and Sheikhaliev, S and Uhlenwinkel, V and Srivastava, V C (2004) Atomization process for metal powder. Materials Science and Engineering A, 383 . pp. 1-6.

Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Effect of thermomechanical treatment on spray formed Cu–Ni–Si alloy. Materials Science and Technology, 20 . pp. 839-848.

Srivastava, V C and Ojha, S N (2004) Microstructure and wear characteristics of spray formed and hot extruded Al–Si alloys. Materials Science and Technology, 20 . pp. 1632-1638.

Rudrakshi, G B and Srivastava, V C and Pathak, J P and Ojha, S N (2004) Spray forming of Al–Si–Pb alloys and their wear characteristics. Materials Science and Engineering A, 383 . pp. 30-38.

Srivastava, V C and Ghosal, P and Ojha, S N (2002) Microstructure and phase formation in spray-deposited Al-18%Si-5%Fe-1.5%Cu alloy. Materials Letters, 56 (5). pp. 797-801.

Srivastava, V C and Ghosal, P and Ojha, S N (2002) Microstructure and phase formation in spray-deposited Al-18%Si-5%Fe-1.5%Cu alloy. Materials Letters, 56 (5). pp. 797-801.

Srivastava, V C and Ghosal, P (2002) Microstructure and phase formation in spray-deposited Al–18%Si–5%Fe–1.5%Cu alloy. Materials Letters, 56 (5). pp. 797-801.

Srivastava, V C and Mandal, R K and Ojha, S N (2001) Microstructural evolution during spray forming of an Al-18Si alloy. Journal of Materials Science Letters, 20 . pp. 27-29.

Srivastava, V C and Upadhyay, A and Ojha, S N (2001) Microstructural features induced by spray forming of a ternary Pb–Sn–Sb alloy. Bulletin of Materials Science, 23 (2). pp. 73-78.

Srivastava, V C and Shukla, P and Ojha, S N (2001) Microstructural features induced by spray forming process. Journal of Metallurgy and materials Science, 43 (2). pp. 77-91.

Srivastava, V C and Mandal, R K and Ojha, S N (2001) Microstructure and mechanical properties of Al–Si alloys produced by spray forming process. Materials Science and Engineering, 304-306 . pp. 555-558.

Book or NML Publication

Srivastava, V C and Bolfarini, C (2017) Spray forming of novel materials. In: Metal Sprays and Spray Deposition. Springer, pp. 521-561. ISBN ISBN 978-3-319-52687-4

Conference or Workshop Item

Srivastava, V C (2015) Conference proceedings: Thermo-mechanical processing of Steels & 5th Gleeble User Workshop India. In: National Conference on Thermo-mechanical processing of Steels & 5th Gleeble User Workshop India (GUWI-2015), August 6-7, 2015, CSIR-NML Jamshedpur.

Srivastava, V C and Saarivirta, E.H. and Cui, C and Uhlenwinkel, V and Schulz, A and Mukhopadhyay, N K (2013) Development of bulk quasicrystalline materials by spray forming. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Goudar, D M and Raju, K and Srivastava, V C and Rudrakshi, G B (2013) Effect of Cu and Mg on the wear properties of spray formed Al -22Si alloy. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Rudrakshi, G B and Goudar, D M and Srivastava, V C (2013) A Comparative Study on Microstructure and Tensile Properties of Spray Formed and Ascast Al-28Si-5Cu-4Fe and Al-28Si-5Cu-4Mg Alloys. In: World Congress on Engineering 2013, July 3-5, 2013, London, UK.

Srivastava, V C and Ellendt, N and Meyer, C and Uhlenwinkel, V (2013) Synthesis of bulk amorphous and nano-crystalline materials by spray forming. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Raju, K and Goudar, D M and Srivastava, V C and Rudrakshi, G B (2013) Wear behavior of secondary processed spray formed Al-28Si-5Cu-4Mg alloy. In: SDMA2013, September 23-25, 2013, Bremen, Germany.

Srivastava, V C and Singh, Mirtunjay and Kumar, Tipu and Sahoo, K L (2011) Effect of Al-alloy composition and foaming temperature on pore size, density and mechanical properties. In: International Conference on Porous Metals and Metallic Foams (MetFoam-2012), September 18-21, 2011, Busan, Korea.

Rudrakshi, G B and Reddy, G J and Goudar, D M and Vagmode, J and Srivastava, V C (2011) Microstructural and Hardness of Spray Deposited Al-30Mg 2 Si-2Cu Alloy in Solutionized and Aged Conditions. In: World Congress on Engineering and Technology, October 28 - November 02, 2011, Sanghai, China.

Srivastava, V C and Surreddi, K B and Scudino, S and Schowalter, M and Uhlenwinkel, V and Schulz, A and Rosenauer, A and Zoch, H -W (2009) Novel microstructural characteristics and properties of spray formed Al-RE-TM based alloys. In: International conference on Spray forming, 2009, September 7-9, 2009, Bremen, Germany.

Srivastava, V C and Uhlenwinkel, V and Schulz, A and Zoch, H -W and Mukhopadhyay, N K and Ghosh Chowdhury, S (2008) Synthesis of the Single Phase i-AlCuFe Bulk Quasicrystal by Spray Forming. In: Tenth international conference on Quasicrystals (ICQ10), July 7-11, 2008, Zurich, Switzerland.

Sinha, Nidhi and Srivastava, V C and Sahoo, K L (2008) Processing and Application of Aluminium Foams. In: Training Programme on Special Metal Casting and Forming Processes - (CAFP - 2008), Feb. 25-26, 2008, NML, Jamshedpur.

Srivastava, V C and Singh, T and Kumar, S and Ghosh Chowdhury, S and Jindal, Vikas (2007) Microstructural Characteristics of Accumulative Roll Bonded Ni-Al Based Metal Intermetallic Laminate Composite. In: International Conference on Recent Advances in Composite Materials, 2007, New Delhi, India, February 20-23, 2007, New Delhi.

Rudrakshi, G B and Srivastava, V C and Ojha, S N (2006) A Comparative Study of Wear Behavior of Spray Formed Al-3.5Cu-10Si-20Pb Alloy in Air and Vacuum. In: Proceedings of the 6th International conference on spray forming, 2006, Bremen, Germany.

Srivastava, V C and Jindal, Vikas and Uhlenwinkel, V and Bauckhage, K (2006) Deformation Behavior of Spray Deposited 2014 Al-SiCP Composites. In: 6th international conference on spray forming, September 04-06, 2006, Bremen, Germany.

Srivastava, A K and Srivastava, V C and Gloter, A and Ojha, S N (2006) Analytical electron microscopy of spray formed and hot extruded Al-18%Si–5%Fe-1.5%Cu alloy. In: International conference on Spray Forming, September 04-06, 2006, Bremen, Germany.

Sharma, Hemant and Chauhan, Ravi and Srivastava, V C (2005) Development of Ultra High Strength and Nanocrystalline Materials by Accumulative Roll Bonding. In: International Conference on Materials Science and Technology(MS&T05) (American Society of Metals), September 27-30, 2005, Pittsburgh, Pensylvania.

Srivastava, V C and Maheshwari, P and Kumar, N (2005) Preparation and Characterization of Aluminium Alloy Based Quasicrystal Reinforced Composites. In: EURO PM2005 : Powder Metallurgy Congress & Exhibitition, October 2-5, 2005, Prague, Czech Republic.

Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Development of 2014-Al Alloy Based SiCp Particulate Reinforced Composites by Spray Co-deposition Process. In: International Conference on Powder Metallurgy-2004, October 17-19, 2004, Vienna, Austria.

Project Reports

Ranjan, Atul and Srivastava, V C and Murugesan, A P (2012) Studies on Electrical Conductivity and Mechanical Properties of all Aluminium alloy Conductors. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Alam, Tanweer and Murugesan, A P and Srivastava, V C (2012) Studies on Aluminium alloy conductors for transmission lines. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Srinivasan, A and De, P K and Srivastava, V C and Poddar, Palash and Sahoo, K L and Ghosh Chowdhury, S and Swaminathan, J (2007) Studies on Large Strain Rolling (LSR) of AZ31 Magnesium Alloy. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Srivastava, V C and De, P K and Lakra, B A and Ravi Kumar, B and Pramanick, A K and Das, Goutam (2006) Development of Quasi-crystal Reinforced Aluminium based Metal matrix Composites. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Ghosh Chowdhury, S and Srivastava, V C and Das, Goutam and De, P K and Das, Swapan K and Swaminathan, J and Mandhyan, Ajay and Singh, S R (2006) Development of High Temperature conductors for Power Transmission Lines. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Poddar, Palash and De, P K and Srivastava, V C and Das, Swapan K and Das, Goutam and Sahoo, K L and Mandal, D and Paul, K K and Ghosh, Sukomal (2006) Development of Rheocasting Facility and Production of Mg - Based Composites. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Jindal, Vikas and Srivastava, V C and Mishra, Suman K and Das, Goutam and Ghosh, R N (2006) Study of Structural Evaluation and Mechanical properties of IF Steel and Aluminium sheets processed by ARB process. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Srivastava, V C and Mishra, Suman K and Das, Goutam and Ghosh, R N (2006) Study of Structural Evaluation and Mechanical properties of IF Steel and Aluminium sheets processes by ARB process. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)