Items where Author is "Singh, R J"

Article

Singh, R J and Jonnalaradda, K N and Guruprasad, P J and Metya, Avijit Kumar and Kushwaha, H S (2021) Effect of constitutive model on residual stress development in the pressure tube rolled joint. International Journal of Pressure Vessels and Piping, 190 .

Mahato, P and Singh, R J and Pathak, L C and Mishra, Suman K (2016) Effect of nitrogen on mechanical, oxidation and structural behaviour of Ti–Si–B–C–N nanocomposite hard coatings deposited by DC sputtering. Surface and Interface Analysis, 48(10) (IF- 1.132). pp. 1080-1089.

Mahato, P and Nyati, G and Singh, R J and Mishra, Suman K (2016) Nanocomposite TiSiBC Hard Coatings with High Resistance to Wear, Fracture and Scratching. Journal of Materials Engineering and Performance, 25(9) (IF-1.331). pp. 3774-3782.

Mahato, P and Singh, R J and Mishra, Suman K (2016) Nanocomposite Ti-Si-B-C hard coatings deposited by magnetron sputtering: Oxidation and mechanical behaviour with temperature and duration of oxidation. Surface & Coatings Technology, 288 (IF- 2.589). pp. 230-240.

Panda, Rekha and Jha, Manis K and Hait, Jhumki and Kumar, G and Singh, R J and Yoo, Kyoungkeun (2016) Extraction of lanthanum and neodymium from leach liquor containing rare earth metals (REMs). Hydrometallurgy, 165 (IF- 2.605). pp. 106-110.

Singh, R J and Surbhi, (2013) Lowering of alumina in high alumina iron ores to produce DR grade iron ore pellets. Journal of Metallurgy and Materials Science, 55(1) . pp. 37-48.

Kumar, A and Singh, R J and Mitra, A and Panda, A K (2008) Preparation of Fe and Co based amorphous wires by in-water quenching process. Materials Science and Technology, 24 (5). pp. 618-622.

Jha, Manis K and Kumar, Vinay and Bagchi, D and Singh, R J (2007) Processing of rayon waste effluent for the recovery of zinc and separation of calcium using thiophosphinic extractant. Journal of Hazardous Materials, 145 (1-2). pp. 221-226.

Jha, Manis K and Kumar, Vinay and Maharaj, L and Singh, R J (2005) Extraction and separation of Zn and Ca from solution using thiophosphinic extractant. Journal of Metallurgy and Materials Science, 47 (2). pp. 71-83.

Jha, Manis K and Kumar, Vinay and Maharaj, L and Singh, R J (2004) Studies on leaching and recycling of Zinc from rayon waste sludge. Industrial & Engineering Chemistry Research, 43 (3). pp. 1284-1295.

Ghosh, Rita and Singh, R J and Singh, D D N (2003) Role of fluoride in accelerating corrosion and pitting of steel in concrete environments. Transactions Of The Indian Institute Of Metals , 56 (4). pp. 391-397.

Ghosh, Rita and Singh, R J and Singh, D D N (2003) Comparing the corrosion resistance of thermo-mechanically treated rebars of low alloy and mild steels embedded in chloride-contaminated concrete mortars. Corrosion Prevention & Control , 50 (2). pp. 94-103.

Singh, D D N and Ghosh , Rita and Singh, R J (2003) Corrosion Performance of Steel Rebars Embedded in Chloride Contaminated Concrete Mortars-Role of Surface Pre-Treatments. Metals Materials and Processes, 16 (2-3). pp. 1-14.

Jha, Manis K and Kumar, Vinay and Singh, R J (2002) Solvent extraction of zinc from chloride solutions. Solvent Extraction and Ion Exchange , 20 (3). pp. 389-405.

Jha, Manis K and Kumar, Vinay and Singh, R J (2001) Review of hydrometallurgical recovery of zinc from industrial wastes. Resources, Conservation and Recycling, 33 (1). pp. 1-22.

Hait, Jhumki and Ranganathan, S and Singh, R J and Premchand, (1997) An Investigation on the beneficiation of a low-grade nickel ore by magnetic separation after partial reduction. NML Technical Journal, 39 (3). pp. 167-175.

Conference or Workshop Item

Jha, Manis K and Kumar, Vinay and Bagchi, D and Singh, R J and Lee, Jae-chun (2006) Recycling of rayon industry effluent for the recovery and separation of Zn/Ca using Thiophosphinic extractant. In: Proceeding of spring meeting and 27th conference, May, 2006, KIGAM.

Singh, R J (2002) Utilisation of Waste- A Novel Approach Towards Cleaner Environment. In: Proceedings of Resurgence of Metallic Materials the Current Scenario-ROMM 2002, Oct. 24 & 25, 2002, National Metallurgical Laboratory(CSIR), Jamshedpur.