Items where Author is "Sau, D C"

Sau, D C and Das, Suchandan K and Bandyopadhyay, D and Mandal, G K (2018) A reduced order mathematical model of the blast furnace raceway with and without pulverized coal injection for real time plant application. International Journal of Modelling and Simulation, online . pp. 1-12.

Bandyopadhyay, D and Sau, D C (2017) Low temperature reduction of iron oxide fines. In: Proceedings of 3rd International Conference on Science and Technology of Ironmaking and Steelmaking’ , 11-13th December , 2017, IIT, Kanpur.

Kisku, Nicky and Sau, D C (2017) Recovery of Tungsten and Copper from Waste Tungsten Copper Borings. Journal of Materials & Metallurgical Engineering, 7(1) (Non-SCI). pp. 1-8.

Mondal, S and Mohanasundaram, M and Sau, D C and Gupta, R K and Kumar, Manoj and Paul, K K and Sirshendu, Dey (2016) Modeling heat transfer of the electrothermal reactor for magnesium production. International Journal of Thermal Sciences, 102 (IF-3.615). pp. 274-284.

Randhawa, N S and Sau, D C and Kumar, Manoj (2016) Direct electrolytic refining of end-of-life industrial copper waste scraps for production of high purity copper powder. Russian journal of non-ferrous metals, 57(4) (IF-0.204). pp. 367-373.

Kumar, K and Randhawa, N S and Gharami, Kalpataru and Sau, D C and Kumar, Manoj (2016) Studies on dissolution kinetics of dolime in electrothermal magnesium slag. Russian Journal of non-ferrous metals, 57(4) (IF-0.238). pp. 287-295.

Sau, D C and Banerjee, A and Kumar, Manoj and Kumar, Rakesh (2015) Experimental investigation for conversion of hematite to magnetite with high ash Jhama Coal. Journal of Metallurgy and Materials Science, 57(2) . pp. 83-91.

Randhawa, N S and Murmu, Nisha and Tudu, Shakuntala and Sau, D C (2014) Iron oxide waste to clean arsenic-contaminated water. Environmental Chemistry Letters, 12(4) (IF-1.906). pp. 517-522.

Randhawa, N S and Yelne, Payal M and Gharami, Kalpataru and Sau, D C and Kumar, Manoj (2014) Recovery of metals from spent nickel-cadmium (Ni-Cd) battery by leaching-electrowining process. In: 18th Int. Conf. on non-ferrous Met. 2014, 11-12 July 2014, Nagpur (India).

Mandal, G K and Sau, D C and Das, Suchandan K and Bandyopadhyay, D (2014) A Steady State Thermal and Material Balance Model for an Iron Making Blast Furnace and Its Validation with Operational Data. Transaction of the Indian Institute of Metals, 67(2) (IF-0.427). pp. 209-221.

Randhawa, N S and Sau, D C (2014) Iron oxide waste to clean arsenic-contaminated water. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM), 12-15 November 2014, College of Engineering, Pune (COEP).

Sau, D C and Das, Suchandan K and Bandyopadhyay, D (2013) A Mathematical Model of The Raceway for Real time Application to an Operating Blast Furnace with Pulverized Coal Injection. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Das, Suchandan K and Mondal, G K and Sau, D C and Bandopadhay, D (2013) A Phenomenological Mathematical Model to Predict the Bosh Silicon Transport Under the Influence of Liquid Hold-up in the Dripping Zone of an Operating Blast Furnace. In: Proceeding of the International Conference on Science and Technology of ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Kumar, Manoj and Sau, D C and Nishant, P and Bhattacharya, Maitreyee (2013) Reduction of Ammonium Paratungstate Generated During Hydrometallurgical Processing of Copper-Tungsten(W-Cu) Borings. In: 17 th International Conference on Non-ferrous Minerals and Metals 2013, 5-6 July, 2013, Ranchi.

Kumar, Manoj and Sau, D C and Nishant, P and Bhattacharya, Maitreyee (2013) Reduction of ammonium paratungstate generated during hydrometallurgical processing of tungsten-copper borings. Harnessing of Nonferrous Minerals and Wastes, 828 . pp. 123-134.

Shanker , Gopi and Sau, D C (2012) Studies on Reduction of Ammonium Paratungstate for produc-ing Tungsten Powder and on Reduction of Hematite to produce Magnetite. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Kumar, Sonam Abhilekha and Sau, D C (2012) Study on Electro-Winning of Copper Powder from the Copper Sulfate Solution. Training Report (TR). CSIR -NML, Jamshedpur. (Unpublished)

Sau, D C and Sengupta, Rajarshi and Bandopadhyay, D (2011) Development of Model for the Estimation of Coke Bed Voidage and the Liquid levels in the Blast Furnace Hearth. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Tripathi, Abhishek and Kumar, Manoj and Agrawal, A and Sau, D C and Chakravarty, S and Mankhand, T R (2011) Leaching of Gold from the Waste Mobile Phone Printed Circuit Boards (PCBS) with Ammonium Thiosulphate. In: 15th International Conference on Nonferrous Metals 2011, 8-9 July 2011, Kolkata,India.

Sau, D C and Biswal, K C (2011) Computational fluid dynamics and experimental study of the hydrodynamics of a gas–solid tapered fluidized bed. Applied Mathematical Modelling, 35 (5). pp. 2265-2278.

Sau, D C and Mohanty, Swati and Biswal, K C (2010) Experimental studies and empirical models for the prediction of bed expansion in gas–solid tapered fluidized beds. Chemical Engineering and Processing: Process Intensification, 49 (4). pp. 418-424.

Sau, D C and Mohanty, Swati and Biswal, K C (2009) Bed Fluctuation Ratio for Regular and Irregular Particles in Gas-Solid Tapered Fluidised Beds. Indian Chemical Engineer, 51 (2). pp. 1-10.

Sau, D C and Mohanty, Swati and Biswal, K C (2008) Minimum fluidization velocity at elevated temperature in tapered fluidized bed. Chemical Engineering and Processing: Process Intensification, 47 (2008). pp. 2391-2394.

Sau, D C and Mohanty, Swati and Biswal, K C (2008) Critical fluidization velocities and maximum bed pressure drops of homogeneous binary mixture of irregular particles in gas–solid tapered fluidized beds. Powder Technology, 186 (3). pp. 241-246.