Items where Author is "Sahoo, Biraj K"

Chandan, A K and Sahoo, Biraj K and Bansal, G K and Ghosh, M (2025) Root Cause Analysis for the Failure of an Air Compressor Impeller. Transactions of the Indian Institute of Metals, 78(1) .

Singh, C V and Bagui, Sumanta and Sahoo, Biraj K and Umbare, O S and Tarafder, Soumitra and Sivaprasad, S (2024) Comparison of low cycle fatigue behaviour of additively manufactured and wrought Inconel625 alloys. Materials Science and Engineering A, 903 .

Das, T and Kumar, B Ravi and Sahoo, Biraj K and Roy, Himadri and Lohar, A K and Samanta, S K and Ghosh, Kunal (2024) Implementation of different scanning strategy to improve the mechanical and wear properties of 15-5 PH stainless steel fabricated by laser-directed energy deposition. Materials Today Communications, 38 .

Sahoo, Biraj K and Walunj, M G and Srivastava, V C and Pais, R and Pathak, L C and Mandal, G K (2024) Elimination of Wettability Issues in Interstitial Free High Strength (IFHS) Steel by Controlling the Annealing Atmosphere. Transactions of The Indian Institute of Metals .

Kumar, Ashish and Singh, V P and Mallik, A and Sahoo, Biraj K and Singh, R C and Chaudhary, R (2024) The utilization of agricultural and industrial waste in the synthesis of AA7075-based novel lightweight composite. Journal of Materials Science .

Kumar, Ashish and Singh, V P and Nirala , A and Singh, R C and Chaudhary, R and Mourad, A H I and Sahoo, Biraj K and Kumar , Deepak (2023) Influence of tool rotational speed on mechanical and corrosion behavior of friction stir processed AZ31/Al2O3 nanocomposite. Journal of Magnesium and Alloys, 11(7) . pp. 2585-2599.

Shivam, V and Kar, S and Bansal, G K and Chandan, A K and Sahoo, Biraj K and Mandal, G K and Mukhopadhyay, N K and Srivastava, V C (2023) A novel Fe-rich non-equiatomic medium-entropy alloy with superior mechanical properties. Journal of Alloys and Compounds, 952 .

Kumar, Ashish and Nirala , A and Singh, V P and Sahoo, Biraj K and Singh, R C and Chaudhary, R and Dewangan, Ashok K and Gaurav, G K and Klemes, J J and Liu, X H (2023) The utilisation of coconut shell ash in production of hybrid composite: Microstructural characterisation and performance analysis. Journal of Cleaner Production, 398 .

Deva, Anjana and Sahoo, Biraj K and Chowdhury, S G (2023) Boron Containing Low Carbon Deep Drawing Continuous Annealed Steel Sheet with Improved Plastic Anisotropy. Transactions of the Indian Institute of Metals .

Kishore, Kaushal and Chandan, A K and Purty, M and Karthik, V and Mishra, G and Sahoo, Biraj K and Meena, L K and Chakraborty, J (2022) Effect of microstructure on corrosion behavior of medium manganese steel. Materials Letters, 330 .

Sahoo, Biraj K and Srivastava, V C and Chandan, A K and Chowdhury, S G (2022) Enhancing the properties of Al-Ni added medium Mn steel by tailoring B2-NiAl precipitates through aging treatment. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 837 .

Kishore, Kaushal and Chandan, A K and Sahoo, Biraj K and Meena, L K (2022) Novel observation of dominant role of strain rate over strain during pre-straining on corrosion behaviour of 304L austenitic stainless steel. Materials Chemistry and Physics, 277 .

Bagui, Sumanta and Mandal, M and Sahoo, Biraj K and Laha, K and Tarafder, Soumitra and Mitra, R (2022) Investigation of non-classical creep behavior of Inconel 617 alloy at 700 degrees C and 800 degrees C through interrupted tests and microstructural characterizations. Materials Science and Engineering A, 832 .

Sahoo, Biraj K and Srivastava, V C and Chandan, A K and Chhabra, H S and Chowdhury, S G (2021) Evolution of microstructure and deformation behavior in Al–Ni added medium-Mn steel processed through intercritical / cold rolling and annealing. Materials Science and Engineering A, 824 .

Singh, Rahul and Yadav, Surya Deo and Sahoo, Biraj K and Ghosh Chowdhury, S and Kumar , Abhishek (2021) Phase transformation, Mechanical Properties and Corrosion Behavior of 304L Austenitic Stainless Steel Rolled at Room and Cryo Temperatures. Defence Science Journal, 71(3) . pp. 383-389.

Chandan, A K and Sahoo, Biraj K and Bansal, G K (2021) Medium Manganese Steel: A Promising Candidate for Automotive Applications. Steel Tech, 15(2) . pp. 60-66.

Sahoo, Biraj K and Srivastava, V C and Mahato, B and Ghosh Chowdhury, S (2021) Microstructure-mechanical property evaluation and deformation mechanism in Al added medium Mn steel processed through intercritical rolling and annealing. Materials Science and Engineering A, 799 (IF-). p. 140100.

Deva, A and Pandey, P and Alam, M S and Sahoo, Biraj K and Kumar, B Ravi and Choudhary, S G and Jha, B K (2021) Processing of Low-Carbon Deep-Drawing Steel with High Plastic Anisotropy Using Two-Stage Batch Annealing Cycle. Journal of Materials Engineering and Performance .

Sahoo, Biraj K and Deva, Anjana and Pandey, Pratiksha and Meena, L K and Ghosh Chowdhury, S and Jha, Bimal Kumar (2020) Microstructure–Property Correlation in High-Strength Formable Steel with Varying Nb-Si Content. Journal of Materials Engineering and Performance, 29 (IF-1.652). pp. 1901-1908.

Sahoo, Biraj K and Tripathy, S and Ghosh, M and Das, Swapan K and Das, Goutam (2019) Investigation of Premature Failure of a Coal-Fired Boiler Superheater Tube. Journal of Failure Analysis and Prevention, 19(3) . pp. 792-801.