Items where Author is "Murty, B S"

Anjaneyulu, Ch and Murty, B S (2017) Soft magnetic properties of Fe-based bulk metallic glass system containing niobium and copper. Journal of Metallurgy and Materials Science, 59(3) . pp. 103-110.

Divya, M and Das, C R and Albert, S K and Goyal, Sunil and Ganesh, P and Kaul, R and Swaminathan, J and Murty, B S and Kukreja, L M and Bhaduri, A K (2014) Influence of welding process on Type IV cracking behavior of P91 steel. Materials Science and Engineering A, 613 (IF-2.409). pp. 148-158.

Das, C R and Albert, S K and Laha, K and Swaminathan, J and Ravi, S and Bhaduri, A K and Murty, B S and Mayer, P (2014) Influence of Coincidence Site Lattice Boundary on Creep Resistance of P91 Steel Weldments. Procedia Engineering, 86 (NIF-0.629). pp. 80-87.

Das, C R and Albert, S K and Swaminathan, J and Bhaduri, A K and Murty, B S (2013) Effect of Boron on Creep Behaviour of Inter-critically Annealed Modified 9Cr-1Mo Steel. Procedia Engineering, 55 . pp. 402-407.

Das, C R and Albert, S K and Swaminathan, J and Raju, S and Bhaduri, A K and Murty, B S (2012) Transition of Crack from Type IV to Type II Resulting from Improved Utilization of Boron in the Modified 9Cr-1Mo Steel Weldment. Metallurgical and Materials Transactions A, 43A . pp. 3724-3741.

Das, C R and Albert, S K and Swaminathan, J and Bhaduri, A K and Raj, B and Murty, B S (2012) Improvement in creep resistance Of modified 9Cr-1Mo steel weldment By boron addition. WELDING IN THE WORLD, 56 (07-08). pp. 10-17.

Mukhopadhyay, N K and Bhatt, Jatin and Pramanick, A K and Murty, B S and Paufler, P (2004) Synthesis of nanocrystalline/quasicrystalline Mg32(Al,Zn)49 by melt spinning and mechanical milling. Journal of Materials Science, 39 (16-17). pp. 5155-5159.

Sahoo, K L and Das, Samar and Murty, B S (2004) Formation of quasicrystalline related intermetallic compounds in conventionally cast Al-Fe-V-Si alloy. Journal of Non-Crystalline Solids, 334 . pp. 29-32.

Venkateswarlu, K and Chakraborty, M and Murty, B S (2004) Influence of thermo-mechanical processing of Al-5Ti-1B master alloy on its grain refining efficiency. Materials Science and Engineering A, 364 (1-2). pp. 75-83.

Venkateswarlu, K and De, P K and Ray, Ajoy K and Chakraborty, M and Murty, B S (2004) Effect of rolling on AI-5Ti binary master alloy(sponge route) and its grain refining performance in aluminium. Journal of Metallurgy and materials Science, 46 (2). pp. 107-113.

Sahoo, K L and Das, Swapan K and Murty, B S (2003) Formation of novel microstructures in conventionally cast Al-Fe-V-Si alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing , 355 (1-2). pp. 193-200.

Sahoo, K L and Das, S K and Murty, B S (2003) Formation of novel microstructures in conventionally cast Al–Fe–V–Si alloys. Materials Science and Engineering A, 355 (1-2). pp. 193-200.

Venkateswarlu, K and Das, Swapan K and Chakraborty, M and Murty, B S (2003) Influence of thermo-mechanical treatment of Al-5Ti master alloy on its grain refining performance on aluminium. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing , 351 (1-2). pp. 237-243.

Mukhopadhyay, N K and Murthy, G V S and Murty, B S and Weatherly, G C (2002) An investigation on the transformation of the decagonal phase to a B2 phase in Al-Cu-Co alloy during mechanical milling. Journal of Alloys and Compounds , 342 (1-2). pp. 38-41.

Mukhopadhyay, N K and Murthy, G V S and Murty, B S and Weatherly, G C (2002) An investigation on the transformation of the decagonal phase to a B2 phase in Al-Cu-Co alloy during mechanical milling. Journal of Alloys and Compounds, 342 (1-2). pp. 38-41.

Mukhopadhyay, N K and Murthy, G V S and Murty, B S and Weatherly, G C (2002) Transformation of the decagonal quasicrystalline phase to a B2 crystalline phase in the Al-Cu-Co system by high-energy ball milling. Philosophical Magazine Letters Online ISSN 1362-3036, 82 (7). pp. 383-392.

Venkateswarlu, K and De, P K and Das, S K and Ray, Ajoy K and Chakraborty, M and Murty, B S (2002) Thermo-mechanical treatment of AI-5Ti-lB and AI-5Ti master alloy on its grain refining performance on aluminium. Journal of Metallurgy and materials Science., 44 (3). pp. 109-125.

Venkateswarlu, K and Murty, B S and Chakraborty, M (2001) Effect of hot rolling and heat treatment of Al–5Ti–1B master alloy on the grain refining efficiency of aluminium. Materials Science and Engineering A, 301 (2). pp. 180-186.

Murty, B S and Maiti, R and Chakraborty, M (2001) Development of in-situ AI-TiB2 metal matrix composites. Journal of Metallurgy and materials Science, 43 (2). pp. 93-101.

Murty, B S and Kori, S A and Venkateswarlu, K and Bhat, R R and Chakraborty, M (1999) Manufacture of Al–Ti–B master alloys by the reaction of complex halide salts with molten aluminium. Journal of Materials Processing Technology, 89-90 . pp. 152-158.