Items where Author is "Mukherjee, S"

Article

Mukherjee, S and Barat, K and Sivaprasad, S and Tarafder, S and Kar, S K (2019) Elevated temperature low cycle fatigue behaviour of Haynes 282 and its correlation with microstructure – Effect of ageing conditions. Materials Science and Engineering: A, 762 . p. 138073.

Yadav, B S and Sahu, Ranjan K and Pramanick, A K and Mishra, T and Alam, A and Bharti, M and Mukherjee, S and Kumar, S and Nayar, S (2019) Collagen functionalized graphene sheets decorated with in situ synthesized nano hydroxyapatite electrospun into fibers. Materials Today Communications, 18 . pp. 167-175.

Pradhan, Ratikanta and Karmakar, Anish and Ghosh, M and Chakrabarti, Debalay and Mukherjee, S (2019) Effect of thermomechanical processing on microstructural evolution in precipitation strengthened ferrite steel. SN Applied science .

Nath, S K and Mukherjee, S and Maitra, S and Kumar, Sanjay (2017) Kinetics study of geopolymerization of fly ash using isothermal conduction calorimetry. Journal of Thermal Analysis and Calorimetry, 127(3) (IF-1.953). pp. 1953-1961.

Hore, S and Das, Suchandan K and Banerjee, S and Mukherjee, S (2017) An adaptive neuro-fuzzy inference systembased modelling to predict mechanical properties of hot-rolled TRIP steel. Ironmaking & Steelmaking, 44(9) (IF-0.985). pp. 656-665.

Nath, S K and Maitra, S and Mukherjee, S and Kumar, Sanjay (2016) Microstructural and morphological evolution of fly ash based geopolymers. Construction and Building Materials, 111 (IF-3.169). pp. 758-765.

Hore, S and Das, S K and Banerjee, S and Mukherjee, S (2016) An adaptive neuro-fuzzy inference system-based modelling to predict mechanical properties of hot-rolled TRIP steel. Ironmaking & Steelmaking , 44(9) (IF-0.985). pp. 1-10.

Hore, S and Das, Suchandan K and Banerjee, S and Mukherjee, S (2015) Computational modelling of static recrystallization and two dimensional microstructure evolution during hot strip rolling of advanced high strength steel. Journal of Manufacturing Processes, 17 (IF-1.528). pp. 78-87.

Nath, S K and Mukherjee, S and Maitra, S and Kumar, Sanjay (2014) Ambient and Elevated Temperature Geopolymerization Behaviour of Class F Fly Ash. Transactions of the Indian Ceramic Society, 73(2) (IF-0.233). pp. 126-132.

Samanta, Salkat and Goswami, M C and Baidya, T K and Mukherjee, S and Dey, R (2013) Mineralogy and carbothermal reduction behaviour of vanadium-bearing titaniferous magnetite ore in Eastern India. International Journal of Minerals Metallurgy and Materials, 20(10) (IF-0.483). pp. 917-924.

Hore, S and Das, Suchandan K and Banerjee, S and Mukherjee, S (2013) A multiscale coupled Monte Carlo model to characterize microstructure evolution during hot rolling of Mo-TRIP steel. Acta Materialia, 61 (IF-3.941). pp. 7251-7259.

Hore, S and Das, Suchandan K and Banerjee, S and Mukherjee, S (2012) Monte Carlo simulation of influence of reheat temperature on austenite grain growth in C‐Mn steel. Materials Science and Technology, 28(6) (IF-0.751). pp. 711-718.

Poddar, Palash and Sahoo, K L and Mukherjee, S and Ray, Ashok K (2012) Creep behaviour of Mg-8% Sn and Mg-8% Sn-3% Al-1% Si alloys. Materials Science and Engineering A, 545 . pp. 103-110.

Bhattacharyya, A S and Mishra, Suman K and Mukherjee, S (2010) Correlation of structure and hardness of rf magnetron sputtered silicon carbonitride films. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 28 (4). pp. 505-509.

Bhattacharyya, A S and Das, G C and Mukherjee, S and Mishra, Suman K (2009) Effect of radio frequency and direct current modes of deposition on protective metallurgical hard silicon carbon nitride coatings by magnetron sputtering. Vacuum, 83 (12). pp. 1464-1469.

Alphonsa, J and Sinha, G and Kumar, A and Jhala, G and Tiwari, S K and Gupta, S and Rayjada, P A and Chauhan, N and Raole, P M and Mukherjee, S (2008) Effect of frequency on the properties of plasma nitrided AISI 4340 steel. Journal of Metallurgy and Materials Science, 50 (2). pp. 119-125.

Kumar, Anil and Ravi Kumar, B and Chattoraj, I and Mukherjee, S and Basumallick, A (2004) Alteration in hydrogen absorption by and hydrogen permeation through a high-strength low-alloy steel due to plasma source ion implantation of nitrogen. Metallurgical and Materials Transactions B, 35 (6). pp. 1123-1128.

Conference or Workshop Item

Nath, S K and Maitra, S and Mukherjee, S and Kumar, Sanjay (2015) Microstructural evolution of fly ash geopolymer: effect of alkali concentration. In: 78th Annual Session of Indian Ceramic Society, 2-3rd February, 2015, Jamshedpur.