Items where Author is "Metya, Avijit Kumar"

Article

Metya, Avijit Kumar and Pramanick, A K and Bar, H N and Gupta, Suneel K and Sagar, Sarmishtha Palit (2023) Detection of fatigue crack initiation pre-cursor in meta-stable SS 304LN using Rayleigh surface wave harmonic generation. Materials Characterization, 201 .

Das, S and Metya, Avijit Kumar and Das, T K and Murugaiyan, Premkumar and Roy, Rajat K and Mahato, D K and Panda, A K (2022) Transduction Efficiency of a Magnetostrictive Sensor for the Generation of Guided Waves in Pipes Using Rapidly Quenched Amorphous Ribbons. IEEE Transaction on Magnetics, 58(6) .

Singh, R J and Jonnalaradda, K N and Guruprasad, P J and Metya, Avijit Kumar and Kushwaha, H S (2021) Effect of constitutive model on residual stress development in the pressure tube rolled joint. International Journal of Pressure Vessels and Piping, 190 .

Pal, Anindya and Metya, Avijit Kumar and Chowdhury, R A and Sinha, A (2020) Structural and Mechanical Behavior of Mechanochemically Synthesized Nanocrystalline Hydroxyapatite from Mercenaria Clam Shells. Transactions of the Indian Ceramic Society, 29(11) . pp. 175-181.

Metya, Avijit Kumar and Das, Anindya and Tarafder, S and Balasubramaniam, Krishnan (2019) Nonlinear Lamb wave for the evaluation of creep damage in modified 9Cr–1Mo steel. NDT & E International, 107 .

Metya, Avijit Kumar and Tarafder, Soumitra and Balasubramaniam, Krishnan (2019) Characterization of Tempering Behaviour of Modified 9Cr-1Mo Steel by Ultrasonic Lamb wave Mixing. Materialstoday :Proceedings, 11(Part 2) . pp. 695-699.

Metya, Avijit Kumar and Tarafder, S and Balasubramaniam, Krishnan (2018) Nonlinear Lamb wave mixing for assessing localized deformation during creep. NDT & E International, 98 (IF-2.781). pp. 89-94.

Metya, Avijit Kumar and Bar, H N and Tarafder, Soumitra and Balasubramaniam, Krishnan (2017) Nonlinear Lamb wave for the assessment of ratcheting behavior in IF steel. Journal of Non Destructive Testing & Evaluation, 15/10 .

Sanyal, S and Chabri, S and Chatterjee, S and Bhowmik, N and Metya, Avijit Kumar and Sinha, Arvind (2016) Tribological behavior of thermomechanically treated Al-Mg-Si alloy by nanoscratch measurements. Tribiology International, 102 (IF-2.903). pp. 125-132.

Barat, Kaustav and Metya, Avijit Kumar and Sathpathy, S and Sivaprasad, S and Tarafder, S and Kar, Sujoy Kumar (2014) Ultrasonic quantification of high temperature cyclic damage in an advanced nickel based superalloy. Materials Science and Engineering A, 625 (IF-2.409). pp. 194-204.

Panda, A K and Metya, Avijit Kumar and Bar, H N and Roy, Rajat K and Murthy, G V S and Palit Sagar, S and Mitra, A (2012) Non-destructive evaluation for structural health assessment. Science and Culture .

Palit Sagar, S and Metya, Avijit Kumar and Ghosh, M and Sivaprasad, S (2011) Effect of microstructure on non-linear behavior of ultrasound during low cycle fatigue of pearlitic steels. Materials Science and Engineering A, 528 (6). pp. 2895-2898.

Metya, Avijit Kumar and Ghosh, M and Parida, N and Palit Sagar, S (2008) Higher harmonic analysis of ultrasonic signal for ageing behaviour study of C-250 grade maraging steel. NDT & E International, 41 (6). pp. 484-489.

Palit Sagar, S and Metya, Avijit Kumar and Parida, N and Ghosh, R N (2008) Nonlinear ultrasonic to assess localized plastic deformation during high cycle fatigue. Review Of Progress In Quantitative Nondestructive Evaluation, Vol 27a And 27b Book Series: AIP Conference Proceedings, 975 . pp. 1260-1266.

Metya, Avijit Kumar and Parida, N and Bhattacharya, D K and Bandopadhyay, N R and Palit Sagar, S (2007) Assessment of Localized Plastic Deformation during Fatigue in Polycrystalline Copper by Nonlinear Ultrasonic. Metallurgical and Materials Transactions A, 38 (12). pp. 3087-3092.

Conference or Workshop Item

Metya, Avijit Kumar and Tarafder, S and Balasubramaniam, Krishnan (2017) Characterization of Tempering Behaviour of Modified 9Cr-1Mo Steel by Ultrasonic Lamb wave Mixing. In: 2nd International Conference on Emerging Materials: Characterization and Application (EMCA-2017), March, 2017, NIT, Durgapur.

Sheethal, S and Giridharan S Sanjay, N V and Metya, Avijit Kumar and Chacko, E Z and Singh, D K and Chandra, Sanjay and Palit Sagar, S (2012) Evaluation and Optimization of Electromagnetic Stirring (EMS) Parameters for Continuously Cast High Carbon Billet Quality using Ultrasonic C-Scan Imaging. In: National Seminar on NDE 2012, December 10 -12, 2012, Ghaziabad, Delhi.

Munda, Parikshit and Metya, Avijit Kumar (2011) Metallurgical Investigation on the Effect of BZL Welding of LPTR Blase Shrouded Tips of Aero Engines. In: International Seminar on Emerging Trends in Repair & Reclamation Technologies on Aero Engine Parts, Nov. 18 2011, Aeronautical Society of India, Chandigarh Branch.

Metya, Avijit Kumar and Murthy, G V S and Bar, H N and Parida, N (2009) Microstructural Characterization of Precipitation Process in a Nickel-Alloy by Non-linear Ultrasonic. In: Proceedings of the National Seminar & Exhibition on Non-Destructive Evaluation, December 10-12, 2009, Trichy.

Palit Sagar, S and Metya, Avijit Kumar and Dey, Swapna and Chattoraj, I (2008) Pitting Stochastic Study in Airframe Aluminium Alloy using Non-linear Ultrasonic. In: 17th World Conference on Nondestructive Testing, 25-28 Oct., 2008, Shanghai, China. (Submitted)

Project Reports

Palit Sagar, S and Ravi Kumar, B and Murthy, G V S and Metya, Avijit Kumar and Prakash, Amit and Mahato, B (2013) Evaluation of Residual Stress of HSS Rolls by Ultrasonic and X-ray diffraction based techniques. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)

Palit Sagar, S and Metya, Avijit Kumar and Prakash, Amit and Das, Arpan (2013) Development of Methodology to Analyse the Amplitude of Ultrasonic Signal from Shell/Core Interface of ICDP Rolls. Sponsored (SSP). CSIR-NML, Jamshedpur. (Submitted)

Palit Sagar, S and Prakash, Amit and Metya, Avijit Kumar (2013) Determination of modulus of Aluminium alloy by ultrasonic technique. Sponsored (SSP). Internal Report, Jamshedpur.

Metya, Avijit Kumar and Prakash, Amit and Palit Sagar, S (2012) Evaluation of Equiaxed zone in Continuously Cast (CC) Billets using Ultrasonic C-Scan Imaging. Sponsored (SSP). NML, Jamshedpur.

Vikash, Avijeet and Metya, Avijit Kumar and Palit Sagar, S (2011) Application of Ultrasonic Technique for Materials property evaluation. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Supriya, and Prakash, Amit and Metya, Avijit Kumar and Palit Sagar, S (2011) Application of Ultrasonic Waves in Non-Destructive Testing and Evaluation. Training Report (TR). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Metya, Avijit Kumar and Bar, H N and Parida, N and Das, S K (2011) Failure Analysis of Ball Clevis of 320KN Hardware Fittings. Sponsored (SSP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Ravi Kumar, B and Murthy, G V S and Mahato, B and Metya, Avijit Kumar and Gunjan, M K and Singh, S R (2011) Non-Destructive and Destructive Investigation of MLG Parts of MIG 29 Aircraft (TMP-0165). Other (TMP). National Metallurgical Laboratory (NML), Jamshedpur. (Submitted)

Metya, Avijit Kumar and Rajnikanth, V and Prakash, Amit and Das, S K (2011) Failure Analysis of Compressor Blade of SU-30MKI(SB-142). Other (TMP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Metya, Avijit Kumar and Rajnikanth, V and Prakash, Amit and Parida, N (2011) Metallurgical Analysis of 1st Stage LPC Compressor Blade of SU-30 MKI SB-062 (No.25). Sponsored (SSP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)