Items where Author is "Mandal , D"

Article

Salot, M and Santhy, K and Naganabonia, V R and Singh, S G and Pramanick, A K and Mandal , D and Avasthi, G and Chaudhary, S K (2025) On improved inorganic gas-sensing characteristics of microwave-treated tungsten oxide quantum dots at room temperature. International Journal of Applied Ceramic Technology.

Choudhary, Chandan and Sharma, Savitesh K and Arif, Sk M D and Sahoo, K L and Bisen, Anil and Mandal, D (2024) Development of Spherical Eutectic Si Particles through M-SIMA Process and Its Effects on the Tensile Properties of Al-7Si-0.05Sr Alloy. Silicon Chemistry, Volume. pp. 2971-2983.

Choudhary, C and Bar, H N and Arif, S K MD and Sahoo, K L and Mandal, D (2024) Effect of Structural Refinement and Modification on the Mechanical Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance, 33. pp. 5155-5167.

Choudhary, C and Bar, H N and Arif, S M D and Sahoo, K L and Mandal, D (2023) Effect of Structural Refinement and Modification on the Mechanical Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance.

Choudhary, C and Bar, H N and Pramanick, A K and Sahoo, K L and Mandal, D (2022) Effect of Strain Induced Melt Activation Process on the Microstructure and Mechanical Properties of Al-5Ti-1B Treated Al-7Si Alloy. Metals and Materials International.

Choudhary, C and Pramanick, A K and Sahoo, K L and Mandal, D (2022) Evaluation of microstructure and mechanical properties of M-SIMA processed Al-7Si alloy. Materials Science and Technology.

Choudhary, C and Sahoo, K L and Roy, Himadri and Mandal, D (2021) Effect of Grain Refiner on Microstructural Feature Influence Hardness and Tensile Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance.

Sahu, Ranjan K and Kumar, Sunil and Mandal , D and Das Chakraborty, S and Bhattacharya, P and Mishra, T (2021) Dangling Bond-Induced Surface Depletion in CdS Leaf. ACS Applied Electronic Materials, 3(7). pp. 2977-2987.

Chaudhary, C and Sahoo, K L and Mandal, D (2019) Processing and characterisation of modified strain-induced melt activation processed Al-Si alloys. Materials Science and Technology, 36(2) (IF-5.040). pp. 181-193.

Choudhary, C and Sahoo, K L and Mandal, D (2019) The Effect of Thermo-Mechanical Processing on the Microstructure and Mechanical Properties of Modified SIMA Treated Al-7Si Alloy. Light Metals. pp. 241-249.

Mandal, D and Murmu, Laxmi and Choudhury, C and Singh, Gaurav and Sahoo, K L (2019) Influence of alloying elements and grain refiner on microstructure, mechanical and wear properties of Mg-Al-Zn alloys. Canadian Metallurgical Quarterly, 58(2). pp. 241-251.

Gaurav, G and Murtaza, Q and Yuvraj, N and Mandal, D and Sahoo, K L and Murmu, L (2017) Synthesis and effect of Misch metal on mechanical properties of conventional cast Mg-Al-Zn-Sn-Pb alloy system. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231(7) (IF-1.625).

Das, Suchandan K and Mandal, D and Sahoo, K L (2015) Neural Modeling and Experimental Investigation of the Erosion Characteristics of Boiler Grade Steels Impacted by Fly Ash. Journal of Materials Engineering and Performance, 24(9) (IF-0.998). pp. 3513-3526.

Barat, K and Bar, H N and Mandal, D and Roy, H and Sivaprasad, S and Tarafder, S (2014) Low temperature tensile deformation and acoustic emission signal characteristics of AISI 304LN stainless steel. Materials Science and Engineering A, 597 (IF-2.409). pp. 37-47.

Mandal, D and Ghosh, M and Pal, J and Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Ghosh, Sukomal (2014) Evolution of microstructure and mechanical properties under different austempering holding time of cast Fe–1.5Si–1.5Mn–V steels. Materials & Design, 54 (IF-3.171). pp. 831-837.

Mandal, D and Viswanathan, S (2013) Effect of heat treatment on microstructure and interface of SiC particle reinforced 2124 Al matrix composite. Materials Characterization, 85 (IF-1.880). pp. 73-81.

Mandal, D and Viswanathan, S (2013) Effect of re-melting on particle distribution and interface formation in SiC reinforced 2124Al matrix composite. Materials Characterization, 86. pp. 21-27.

Sahoo, K L and Mandal, D and Paul, K K and Ghosh, Sukomal (2012) Metallurgical heritage of India : Preservation and rejuvenation. Science and Culture. pp. 532-536.

Sahu, J K and Das, D K and Nandy, T K and Mandal, D and Rajnikanth, V and Swaminathan, J and Ray, Ashok K (2011) Effect of titanium aluminide coating on cyclic plastic deformation and fatigue life of a titanium alloy at 600 °C. Materials Science and Engineering A, 530. pp. 664-668.

Datta, A K and Mandal, D and Sahoo, K L (2011) Measuring uncertainties of metal working processes in computational simulations : A novel approach. Journal of Metallurgy and Materials Science, 53 (2). pp. 183-187.

Ray, Ashok K and Bose, S C and De, P K and Mandal, D and Alam, H Z and Sharma, VSRA and Das, D K (2010) Evaluation of the Lifetime and Effect of Furnace Thermal Cycling on Stress Rupture Behaviour of a Thermal Barrier Coated Superalloy Used in a Turbine Blade. Canadian Metallurgical Quarterly, 49 (2). pp. 191-214.

Mandal, D and Dutta, B K and Panigrahi, S C (2010) Influence of coating and alloy additions on distribution of fibres and hardness of cast aluminium base short steel fibre reinforced composites. Materials Science and Technology, 26 (2). pp. 157-163.

Mandal, G K and Mandal, D and Das, S K and Balasubramaniam, R and Mehrotra, S P (2009) Microstructural study of galvanized coatings formed in pure as well as commercial grade zinc baths. Transactions of the Indian Institute of Metals, 62 (1). pp. 35-40.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, S (2009) Effect of austempering treatment on microstructure and mechanical properties of high-Si steel. Journal of Materials Science, 44 (4). pp. 1069-1075.

Mandal, D and Dutta, B K and Panigrahi, S C (2008) Effect of copper and nickel coating on short steel fiber reinforcement on microstructure and mechanical properties of aluminium matrix composites. Materials Science and Engineering A, 492 (1-2). pp. 346-352.

Mandal, D and Dutta, B K and Panigrahi, S C (2008) Wear properties of copper-coated short steel fiber reinforced stir cast Al–2Mg alloy composites. Wear, 265 (5-6). pp. 930-939.

Mandal, D and Dutta, B K and Panigrahi, S C (2008) Effect of wt% reinforcement on microstructure and mechanical properties of Al-2Mg base short steel fiber composites. Journal of Materials Processing Technology, 198 (1-3). pp. 195-201.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of mechanical working on properties of aluminium base short steel fiber reinforced composites. Influence of mechanical working on properties of aluminium base short steel fiber reinforced composites, 42 (20). pp. 8622-8628.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Effect of coating on the wear properties of stir cast Al–2Mg base short steel fiber reinforced composites. Materials Science and Engineering A, 460-46. pp. 485-493.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Dry sliding wear behavior of stir cast aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (7). pp. 2417-2425.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Processing and mechanical properties of Al, A-Mg-2 and Al-Cu-4 alloy base short steel fibre reinforced composites prepared by vortex method. Materials Science and Technology, 23 (1). pp. 23-28.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (8). pp. 2796-2801.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (8). pp. 2796-2801.

Mandal, D and Dutta, B K and Panigrahi, S C (2006) Microstructure and mechanical properties of Al–2Mg alloy base short steel fiber reinforced composites prepared by vortex method. Journal of Materials Science, 41 (15). pp. 4764-4770.

Project Reports

Rajnikanth, V and Munda, Parikshit and Mandal, D and Minj, R K and Das, Swapan K and Ghosh Chowdhury, S and Singh, S R (2009) Development and Evaluation of Wear Resistant Material. Exploratory (OLP). NML, Jamshedpur. (Submitted)

Poddar, Palash and De, P K and Srivastava, V C and Das, Swapan K and Das, Goutam and Sahoo, K L and Mandal, D and Paul, K K and Ghosh, Sukomal (2006) Development of Rheocasting Facility and Production of Mg - Based Composites. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Mandal, D and Ghosh, M and Pal, J and De, P K and Das, Goutam and Das, Swapan K and Ghosh Chowdhury, S and Lakra, B A and Ghosh, Sukomal (2006) Development of Cast Austempered Fe-Si-Mn-ME (Microalloying Elements) Steels. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Conference or Workshop Item

Arif, S M and Ghorai, S and Bar, H N and Mandal, D (2022) Effect of quenching and partitioning time on microstructure and mechanical properties of low carbon micro-alloyed steel. In: Symposium on Failure and Preventive Maintenance of Machineries (FPMM), March 08-09, 2022, Durgapur, India.

Mandal , D (2008) Near Net Shape Casting through Investment, Die and Centrifugal Casting. In: Training programme on Special Metal Casting and Forming Processes (CAFP-2008), Feb. 25-26, 2008, NML, Jamshedpur.

Mandal, D (2008) Effect of wt% Reinforcement on Mechanical and Wear properties of Al-2mg base Short Copper Coated Steel Fiber Composites. In: Seminar on Growth with Quality Challenges & Opportunities for foundry, January 18-19, 2008, TMDC Auditorium, Jamshedpur.

Mandal, D (2008) Effect of wt% Reinforcement on Mechanical and Wear Properties of Al-2Mg base short copper Coated Steel Fiber Composites. In: Seminar on Growth with Quality Challenges & Opportunities for foundry, January 18-19, 2008, TMDC Auditorium, Jamshedpur.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2008) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 15-16, 2008, NML, Jamshedpur.

Mandal, G K and Mandal, D and Das, S K and Balasubramaniam, R and Mehrotra, S P (2007) Microstructural Study of Galvanized coatings formed in Pure as well as Commercial Grade Zn Baths. In: International Conference on Metals and Alloys : Past, Present and Future Metallo-2007, Dec. 7-10, 2007, NML, Jamshedpur.

Das, S K and Godiwalla, K M and Mehrotra, S P and Dey, P K and Mandal , D and Hegde, Shubha (2006) Mathematical Modelling of ductile erosion behaviour of impacted fly ash particles on steel components of coal fired boiler. In: 60 Annual Technical Meeting, November, 15-16, 2006, NML, Jamshedpur.

Das, S K and Godiwalla, K M and Mehrotra, S P and Dey, P K and Mandal, D and Hegde, Shubha (2006) Mathematical modelling of ductile erosion behaviour of impacted fly ash particles on steel components of a coal fired boiler. In: 60 Annual Technical Meeting, November, 15-16 2006, IIM & Tata Steel,Jamshedpur.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2006) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 14-16, 2006, NML, Jamshedpur.