Items where Author is "Mandal, G K"

Article

Sahoo, Biraj K and Walunj, M G and Srivastava, V C and Pais, R and Pathak, L C and Mandal, G K (2024) Elimination of Wettability Issues in Interstitial Free High Strength (IFHS) Steel by Controlling the Annealing Atmosphere. Transactions of The Indian Institute of Metals .

Usha, Yenni and Das, Atanu and Bansal, G K and Krishna, K Gopala and Mandal, G K (2024) Heat Transfer and Fluid Flow During Laser Powder Bed Fusion of SS316L Stainless Steel. Transactions of The Indian Institute of Metals .

Kar, Shubhada and Srivastava, V C and Mandal, G K (2023) Low-density nano-precipitation hardened Ni-based medium entropy alloy with excellent strength-ductility synergy. Journal of Alloys and Compounds, 963 .

Shivam, V and Kar, S and Mandal, G K and Srivastava, V C (2023) Microstructural evolution and phase selection during solidification of AlCrCuFeNi high entropy alloy. Journal of Alloys and Compounds, 963 .

Kancharla, H and Mandal, G K and Prasad, N K and Vishwanath, K and Bhushan, B and Godbole, K and Singh, S S and Mondal, K (2023) Effect of inter-critical annealing atmosphere on microstructure and subsequent corrosion behavior of hot-dip galvanized Mn containing high-strength steel. Journal of Applied Electrochemistry .

Kar, Shubhada and Meena, L K and Srivastava, V C and Mandal, G K (2023) Microstructural, Mechanical, and Corrosion Behaviour of Ni-Fe-Cr-Al and Ni-Fe-Cr-Al-Co Alloys. Transactions of the Indian Institute of Metals .

Sahu, V K and Tripathy, S and Chowdhury, S G and Mandal, G K (2023) On the Unified Interaction Parameter Formalism and Its Application in Critical Reassessment of Pearlitic Transformation in Fe-C-Mn System. Metallurgical and Materials Transactions A -Physical Metallurgy and Materials Science . pp. 3157-3185.

Shivam, V and Kar, S and Bansal, G K and Chandan, A K and Sahoo, Biraj K and Mandal, G K and Mukhopadhyay, N K and Srivastava, V C (2023) A novel Fe-rich non-equiatomic medium-entropy alloy with superior mechanical properties. Journal of Alloys and Compounds, 952 .

Kancharla, H and Mandal, G K and Pradeep, K G and Singh, S S and Mondal, K (2023) Understanding the Formation Mechanism of Al-Rich Interfacial Layer during Galvanizing of Cu Pre-coated High-Strength Steel Sheet. Journal of Materials Engineering and Performance .

Das, A and Chaurasia, P K and Mandal, G K and Goecke, S F and De, AMTV (2022) Analytical estimation of thermomechanical distortion and interface layer thickness for gas metal arc lap joining of dissimilar sheets. Welding in the World .

Kancharla, H and Mandal, G K and Kumar, R R and Chakraborty, A and Singh, S S and Mondal, K (2022) Effect of Annealing Time on Coating Microstructure, Frictional and Electrochemical Behavior of Galvannealed Interstitial-Free Steel. Journal of Materials Engineering and Performance .

Kancharla, H and Mandal, G K and Maharana, S H and Singh, S S and Mondal, K (2022) Structure-Dependent Corrosion Behavior of Electrodeposited Zn Coating. Journal of Materials Engineering and Performance .

Kamaraj, Ashok and Murugaiyan, Premkumar and Mandal, G K and Roy, G G (2022) The Role of Slag Carryover on the Non-metallic Inclusion Evolution and Magnetic Behavior in Electrical Steel. Metallurgical and Materials Transactions B- Process Metallurgy and Materials Processing Science, 53(4) . pp. 1989-2003.

Kancharla, H and Mandal, G K and Singh, S S and Mondal, K (2022) Effect of prior copper-coating on the microstructural development and corrosion behavior of hot-dip galvanized Mn containing high strength steel sheet. Surface & Coating Technology, 437 .

Kamaraj, A and Mandal, G K and Shanmugam, S P and Roy, G G (2022) Quantification and analysis of slag carryover during liquid steel tapping from BOF vessel. Canadian Metallurgical Quarterly, 61(2) . pp. 202-215.

Kancharla, H and Mandal, G K and Singh, S S and Mondal, K (2022) Effect of strip entry temperature on the interfacial layer and corrosion behavior of galvanized steel. Surface & Coating Technology, 433 .

Das, A and Kumar, B and Ahmad, Sheikh Nazir and Paul, S K and Mandal, G K (2021) Formability study of bake hardening steel and its correlation with microstructure. Proceedings of the Institute of Mechanical Engineers Part B-Journal of Engineering Manufacture .

Walunj, M G and Mandal, G K and Ranjan, R K and Pais, R and Mishra, Suman K and Venugopalan, T and Pathak, L C (2021) Role of dew points and Fe pre-coats on the galvanizing and galvannealing of dual phase steel. Surface and Coatings Technology, 422 .

Srivastava, A and Kamaraj, A and Mandal, K and Mandal, G K (2021) Role of Synthetic Slag Treatment on the Morphology of Non-Metallic Inclusions and Subsequent Cold Drawability of the High Carbon Wire Rod Steel. Metals and materials international .

Thakur, A K and Kumar, R R and Bansal, G K and Verma, Rahul K. and Tarafder, S and Sivaprasad, S and Mandal, G K (2021) Processing-Microstructure-Property Correlation for Producing Stretch-Flangeable Grade Dual-Phase Steel. Journal of Materials and Performance .

Bansal, G K and Chandan, A K and Mandal, G K and Srivastava, V C (2020) High Entropy Alloys: An Overview on Current Developments" in the book "High Entropy Alloys: Innovations, Advances, and Applications. High Entropy Alloys: Innovations, Advances, and Applications (Book). pp. 1-68.

Mandal, G K and Dutta, M and Kumar, Tipu and Mondal, Avik and Walunj, M G and Mishra, Suman K and Pais, R and Pathak, L C (2020) Formation and growth of iron-zinc intermetallics during annealing treatment of galvanized steel. Journal of Metallurgy and Materials Science, 62(1-2) . pp. 29-47.

Kamaraj, A and Mandal, G K and Roy, G G (2019) Control of Slag Carryover from the BOF Vessel During Tapping: BOF Cold Model Studies. Metallurgical and Materials Transactions B , 50(1) . pp. 438-458.

Mandal, G K and Kamaraj, A and Minj, M.M. and Das, S K and Ramanan, R B V and Venugopalan, T (2019) Development of Speciality Grade Wire by Controlling the Inclusions in High-Carbon Steel Using Synthetic Slag Treatment. Transactions of the Indian Institute of Metals, 72(2) . pp. 369-381.

Mandal, G K and Ashok, K and Das, S K and Biswas, S K and Sarkar, R B and Bharathy, R S and Srivastava, V C (2018) Development of Stretch Flangeable Grade Steels by Inclusion Engineering Approach. Journal Of Materials Engineering And Performance, 27(11) (IF-1.094). pp. 5622-5634.

Kumar, Sunil and Mandal, G K and Rajnikanth, V and Misra, S and Ghosh Chowdhury, S and Srivastava, V C (2018) Effect of cooling media on microstructure and mechanical properties of Nb/Ti containing microalloyed steel. Journal of Metallurgy and Materials Science, 60(1) . pp. 1-12.

Bansal, G K and Madhukar, D A and Chandan, A.K. and Ashok, K and Mandal, G K and Srivastava, V C (2018) On the intercritical annealing parameters and ensuing mechanical properties of low-carbon medium-Mn steel. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 733 (IF-4.081). pp. 246-256.

Sau, D C and Das, Suchandan K and Bandyopadhyay, D and Mandal, G K (2018) A reduced order mathematical model of the blast furnace raceway with and without pulverized coal injection for real time plant application. International Journal of Modelling and Simulation, online . pp. 1-12.

Kamaraj, A and Mandal, G K and Minj, R K and Misra, S and Bandyopadhyay, D (2017) Characterization and Evolution of Non-metallic Inclusions in Fe–Al–Si–O System. Transactions of the Indian Institute of Metals, 70(7) (IF-0.533). pp. 1887-1899.

Mandal, G K and Kumar, Sudhir and Kumar, Tipu and Srivastava, V C (2017) Hot Deformation Behaviour of a Nb-Mo Linepipe Steel. Transaction of the Indian Institute of Metals, 70(7) (IF-0.533). pp. 1943-1951.

Kumar, Sunil and Srivastava, V C and Mandal, G K and Pattanayek, S K and Sahoo, K L (2017) Single-Walled Carbon Nanotube Engendered Pseudo-1D Morphologies of Silver Nanowire. Journal of Physical Chemistry C, 121 (IF-4.536). pp. 20468-20480.

Mandal, G K and Rajnikanth, V and Kumar, S and Mishra, D and Misra, S and Srivastava, V C and Ghosh Chowdhury, S (2017) Microstructure Evolution During Hot Deformation of a Micro-Alloyed Steel. Transactions of the Indian Institute of Metals, 70(4) (IF 0.533). pp. 1019-1033.

Ravi Kumar, B and Patel, N K and Mukherjee, K and Walunj, Mahesh and Mandal, G K and Venugopalan, T (2017) Ferrite channel effect on ductility and strain hardenability of ultra high strength dual phase steel. Materials Science and Engineering A- Structural Materials Properties Microstructure and Processing, 685 (IF-3.094). pp. 187-193.

Srivastava, V C and Mandal, G K and Ciftci, N and Uhlenwinkel, V and Madler, L (2017) Processing of High-Entropy AlCoCr0.75Cu0.5FeNi Alloy by Spray Forming. Journal Of Materials Engineering And Performance, 26/12 (IF- 1.331). pp. 5906-5920.

Ghorai, S and Mandal, G K and Roy, S and Minj, R K and Agarwal, Anup and Singh, D P and Kumar, A and Ramna, R B V (2017) Treatment of LF slag to prevent powdering during cooling. Journal of Mining and Metallurgy Section B- Metallurgy , 53(2)B (IF-0.804). pp. 123-130.

Guria, A and Mandal, G K and Hodgson, Peter and Beynon, John H and Ghosh Chowdhury, S (2015) Effect of Twinning on Microstructural Evolution During Dynamic Recrystallisation of Hot Deformed As-Cast Austenitic Stainless Steel. Metallurgical and Materials Transactions A, 46(10) . pp. 4423-4428.

Chakravarty, S and Mohanty, Ashok and Banerjee, Amit and Tripathy, R and Mandal, G K and Basariya, M R and Sharma, Mamta (2015) Composition, mineral matter characteristics and ash fusion behavior of some Indian coals. Fuel, 150 (IF-3.406). pp. 96-101.

Ashok, K and Mandal, G K and Bandyopadhyay, D (2015) Theoretical Investigation on Deoxidation of Liquid Steel for Fe–Al–Si–O System. Transactions of Indian Institute of Metals, 68 Suppl 1 (IF-0.615). pp. 9-18.

Jindal, Vikas and Rupa, P K P and Mandal, G K and Srivastava, V C (2014) Effect of High-Temperature Severe Plastic Deformation on Microstructure and Mechanical Properties of IF Steel. Journal of Materials Engineering and Performance, 23(6) (IF-0.981). pp. 1954-1958.

Mandal, G K and Sau, D C and Das, Suchandan K and Bandyopadhyay, D (2014) A Steady State Thermal and Material Balance Model for an Iron Making Blast Furnace and Its Validation with Operational Data. Transaction of the Indian Institute of Metals, 67(2) (IF-0.427). pp. 209-221.

Mandal, G K and Stanford, Nicole and Hodgson, Peter and Beynon, John H (2013) Static recrystallisation study of as-cast austenitic stainless steel. Materials Science and Engineering A, 576 (IF-2.108). pp. 118-125.

Mandal, G K and Stanford, Nicole and Hodgson, Peter and Beynon, John H (2012) Effect of hot working on dynamic recrystallisation study of as-cast austenitic stainless steel. Materials Science and Engineering A, 556 . pp. 658-695.

Mandal, G K and Das, Suchandan K and Balasubramaniam, R and Mehrotra, S P (2011) Evolution of microstructures of galvanised and galvannealed coatings formed in 0.2 wt-% aluminium–zinc bath. Materials Science and Technology, 27 (8 ). pp. 1265-1270.

Das, Suchandan K and Kumari, Amrita and Bandopadhay, D and Akbar, S A and Mandal, G K (2011) A mathematical model to characterise effects of liquid hold-up on bosh silicon transport in the dripping zone of a blast furna. Applied Mathematical Modelling, 35 . pp. 4208-4221.

Das, Suchandan K and Kumari, Amrita and Bandyopadhyay, D and Akbar, S A and Mandal, G K (2011) A mathematical model to characterise effects of liquid hold-up on bosh silicon transport in the dripping zone of a blast furnace. Applied Mathematical Modelling, 35 . pp. 4208-4221.

Mandal, G K and Das, Swapan K and Balasubramaniam, R and Mehrotra, S P (2010) Effect of Elevated Strip Entry Temperature on the Aluminum Rich Inhibition Layer at the Substrate Coating Interface During Galvanizing. Canadian Metallurgical Quarterly , 49 (3). pp. 301-309.

Mandal, G K and Balasubramaniam, R and Mehrotra, S P (2009) Theoretical Investigation of the Interfacial Reactions during Hot-Dip Galvanizing of Steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 40-A (3). pp. 637-645.

Mandal, G K and Mandal, D and Das, S K and Balasubramaniam, R and Mehrotra, S P (2009) Microstructural study of galvanized coatings formed in pure as well as commercial grade zinc baths. Transactions of the Indian Institute of Metals, 62 (1). pp. 35-40.

Mandal, G K and Batra, N K and Mehrotra, S P (2007) Sulphur control of blast furnace hot metal by manganese additions. Transaction of the Indian Institute of Metals, 60 (1). pp. 45-52.

Conference or Workshop Item

Mandal, G K and Balasubramaniam , R and Mehrotra, S P (2008) Effect of several process parameters on interfacial aluminum rich layer in galvanized coatings. In: International Seminar on Prospect, Problems and Potential of Coated Steels’ Edited by M. Datta, N. Bandyopadhyay, S. Chakrabarti, S. Chandra and T. Venugopalan, February 14-16, 2008, organized by IIM Jamshedpur chapter and TATA STEEL, Jamshedpur, .

Mandal, G K and Mandal, D and Das, S K and Balasubramaniam, R and Mehrotra, S P (2007) Microstructural Study of Galvanized coatings formed in Pure as well as Commercial Grade Zn Baths. In: International Conference on Metals and Alloys : Past, Present and Future Metallo-2007, Dec. 7-10, 2007, NML, Jamshedpur.