Items where Author is "Mandal, D"

Article

Choudhary, C and Bar, H N and Arif, S M D and Sahoo, K L and Mandal, D (2023) Effect of Structural Refinement and Modification on the Mechanical Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance .

Choudhary, C and Bar, H N and Pramanick, A K and Sahoo, K L and Mandal, D (2022) Effect of Strain Induced Melt Activation Process on the Microstructure and Mechanical Properties of Al-5Ti-1B Treated Al-7Si Alloy. Metals and Materials International .

Choudhary, C and Pramanick, A K and Sahoo, K L and Mandal, D (2022) Evaluation of microstructure and mechanical properties of M-SIMA processed Al-7Si alloy. Materials Science and Technology .

Choudhary, C and Sahoo, K L and Roy, Himadri and Mandal, D (2021) Effect of Grain Refiner on Microstructural Feature Influence Hardness and Tensile Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance .

Sahu, Ranjan K and Kumar, Sunil and Mandal , D and Das Chakraborty, S and Bhattacharya, P and Mishra, T (2021) Dangling Bond-Induced Surface Depletion in CdS Leaf. ACS Applied Electronic Materials, 3(7) . pp. 2977-2987.

Chaudhary, C and Sahoo, K L and Mandal, D (2020) Processing and characterisation of modified strain-induced melt activation processed Al-Si alloys. Materials Science and Technology, 36(2) (IF-5.040). pp. 181-193.

Choudhary, C and Sahoo, K L and Mandal, D (2019) The Effect of Thermo-Mechanical Processing on the Microstructure and Mechanical Properties of Modified SIMA Treated Al-7Si Alloy. Light Metals . pp. 241-249.

Mandal, D and Murmu, Laxmi and Choudhury, C and Singh, Gaurav and Sahoo, K L (2019) Influence of alloying elements and grain refiner on microstructure, mechanical and wear properties of Mg-Al-Zn alloys. Canadian Metallurgical Quarterly, 58(2) . pp. 241-251.

Gaurav, G and Murtaza, Q and Yuvraj, N and Mandal, D and Sahoo, K L and Murmu, L (2017) Synthesis and effect of Misch metal on mechanical properties of conventional cast Mg-Al-Zn-Sn-Pb alloy system. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231(7) (IF-1.625).

Das, Suchandan K and Mandal, D and Sahoo, K L (2015) Neural Modeling and Experimental Investigation of the Erosion Characteristics of Boiler Grade Steels Impacted by Fly Ash. Journal of Materials Engineering and Performance, 24(9) (IF-0.998). pp. 3513-3526.

Barat, K and Bar, H N and Mandal, D and Roy, H and Sivaprasad, S and Tarafder, S (2014) Low temperature tensile deformation and acoustic emission signal characteristics of AISI 304LN stainless steel. Materials Science and Engineering A, 597 (IF-2.409). pp. 37-47.

Mandal, D and Ghosh, M and Pal, J and Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Ghosh, Sukomal (2014) Evolution of microstructure and mechanical properties under different austempering holding time of cast Fe–1.5Si–1.5Mn–V steels. Materials & Design, 54 (IF-3.171). pp. 831-837.

Mandal, D and Viswanathan, S (2013) Effect of heat treatment on microstructure and interface of SiC particle reinforced 2124 Al matrix composite. Materials Characterization, 85 (IF-1.880). pp. 73-81.

Mandal, D and Viswanathan, S (2013) Effect of re-melting on particle distribution and interface formation in SiC reinforced 2124Al matrix composite. Materials Characterization, 86 . pp. 21-27.

Sahoo, K L and Mandal, D and Paul, K K and Ghosh, Sukomal (2012) Metallurgical heritage of India : Preservation and rejuvenation. Science and Culture . pp. 532-536.

Sahu, J K and Das, D K and Nandy, T K and Mandal, D and Rajnikanth, V and Swaminathan, J and Ray, Ashok K (2011) Effect of titanium aluminide coating on cyclic plastic deformation and fatigue life of a titanium alloy at 600 °C. Materials Science and Engineering A, 530 . pp. 664-668.

Datta, A K and Mandal, D and Sahoo, K L (2011) Measuring uncertainties of metal working processes in computational simulations : A novel approach. Journal of Metallurgy and Materials Science, 53 (2). pp. 183-187.

Ray, Ashok K and Bose, S C and De, P K and Mandal, D and Alam, H Z and Sharma, VSRA and Das, D K (2010) Evaluation of the Lifetime and Effect of Furnace Thermal Cycling on Stress Rupture Behaviour of a Thermal Barrier Coated Superalloy Used in a Turbine Blade. Canadian Metallurgical Quarterly, 49 (2). pp. 191-214.

Mandal, D and Dutta, B K and Panigrahi, S C (2010) Influence of coating and alloy additions on distribution of fibres and hardness of cast aluminium base short steel fibre reinforced composites. Materials Science and Technology, 26 (2). pp. 157-163.

Mandal, G K and Mandal, D and Das, S K and Balasubramaniam, R and Mehrotra, S P (2009) Microstructural study of galvanized coatings formed in pure as well as commercial grade zinc baths. Transactions of the Indian Institute of Metals, 62 (1). pp. 35-40.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, S (2009) Effect of austempering treatment on microstructure and mechanical properties of high-Si steel. Journal of Materials Science, 44 (4). pp. 1069-1075.

Mandal, D and Dutta, B K and Panigrahi, S C (2008) Effect of copper and nickel coating on short steel fiber reinforcement on microstructure and mechanical properties of aluminium matrix composites. Materials Science and Engineering A, 492 (1-2). pp. 346-352.

Mandal, D and Dutta, B K and Panigrahi, S C (2008) Wear properties of copper-coated short steel fiber reinforced stir cast Al–2Mg alloy composites. Wear, 265 (5-6). pp. 930-939.

Mandal, D and Dutta, B K and Panigrahi, S C (2008) Effect of wt% reinforcement on microstructure and mechanical properties of Al-2Mg base short steel fiber composites. Journal of Materials Processing Technology, 198 (1-3). pp. 195-201.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of mechanical working on properties of aluminium base short steel fiber reinforced composites. Influence of mechanical working on properties of aluminium base short steel fiber reinforced composites , 42 (20). pp. 8622-8628.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Effect of coating on the wear properties of stir cast Al–2Mg base short steel fiber reinforced composites. Materials Science and Engineering A, 460-461 . pp. 485-493.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Dry sliding wear behavior of stir cast aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (7). pp. 2417-2425.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Processing and mechanical properties of Al, A-Mg-2 and Al-Cu-4 alloy base short steel fibre reinforced composites prepared by vortex method. Materials Science and Technology, 23 (1). pp. 23-28.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (8). pp. 2796-2801.

Mandal, D and Dutta, B K and Panigrahi, S C (2007) Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites. Journal of Materials Science, 42 (8). pp. 2796-2801.

Mandal, D and Dutta, B K and Panigrahi, S C (2006) Microstructure and mechanical properties of Al–2Mg alloy base short steel fiber reinforced composites prepared by vortex method. Journal of Materials Science, 41 (15). pp. 4764-4770.

Conference or Workshop Item

Arif, S M and Ghorai, S and Bar, H N and Mandal, D (2022) Effect of quenching and partitioning time on microstructure and mechanical properties of low carbon micro-alloyed steel. In: Symposium on Failure and Preventive Maintenance of Machineries (FPMM), March 08-09, 2022, Durgapur, India.

Mandal , D (2008) Near Net Shape Casting through Investment, Die and Centrifugal Casting. In: Training programme on Special Metal Casting and Forming Processes (CAFP-2008), Feb. 25-26, 2008, NML, Jamshedpur.

Mandal, D (2008) Effect of wt% Reinforcement on Mechanical and Wear properties of Al-2mg base Short Copper Coated Steel Fiber Composites. In: Seminar on Growth with Quality Challenges & Opportunities for foundry, January 18-19, 2008, TMDC Auditorium, Jamshedpur.

Mandal, D (2008) Effect of wt% Reinforcement on Mechanical and Wear Properties of Al-2Mg base short copper Coated Steel Fiber Composites. In: Seminar on Growth with Quality Challenges & Opportunities for foundry, January 18-19, 2008, TMDC Auditorium, Jamshedpur.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2008) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 15-16, 2008, NML, Jamshedpur.

Mandal, G K and Mandal, D and Das, S K and Balasubramaniam, R and Mehrotra, S P (2007) Microstructural Study of Galvanized coatings formed in Pure as well as Commercial Grade Zn Baths. In: International Conference on Metals and Alloys : Past, Present and Future Metallo-2007, Dec. 7-10, 2007, NML, Jamshedpur.

Das, S K and Godiwalla, K M and Mehrotra, S P and Dey, P K and Mandal, D and Hegde, Shubha (2006) Mathematical modelling of ductile erosion behaviour of impacted fly ash particles on steel components of a coal fired boiler. In: 60 Annual Technical Meeting, November, 15-16 2006, IIM & Tata Steel,Jamshedpur.

Das, S K and Godiwalla, K M and Mehrotra, S P and Dey, P K and Mandal , D and Hegde, Shubha (2006) Mathematical Modelling of ductile erosion behaviour of impacted fly ash particles on steel components of coal fired boiler. In: 60 Annual Technical Meeting, November, 15-16, 2006, NML, Jamshedpur.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2006) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 14-16, 2006, NML, Jamshedpur.

Project Reports

Rajnikanth, V and Munda, Parikshit and Mandal, D and Minj, R K and Das, Swapan K and Ghosh Chowdhury, S and Singh, S R (2009) Development and Evaluation of Wear Resistant Material. Exploratory (OLP). NML, Jamshedpur. (Submitted)

Poddar, Palash and De, P K and Srivastava, V C and Das, Swapan K and Das, Goutam and Sahoo, K L and Mandal, D and Paul, K K and Ghosh, Sukomal (2006) Development of Rheocasting Facility and Production of Mg - Based Composites. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Mandal, D and Ghosh, M and Pal, J and De, P K and Das, Goutam and Das, Swapan K and Ghosh Chowdhury, S and Lakra, B A and Ghosh, Sukomal (2006) Development of Cast Austempered Fe-Si-Mn-ME (Microalloying Elements) Steels. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)