Items where Author is "Kumar, B Ravi"

Das, T and Kumar, B Ravi and Sahoo, Biraj K and Roy, Himadri and Lohar, A K and Samanta, S K and Ghosh, Kunal (2024) Implementation of different scanning strategy to improve the mechanical and wear properties of 15-5 PH stainless steel fabricated by laser-directed energy deposition. Materials Today Communications, 38.

Ghosh, M and Mahato, B and Kumar, B Ravi (2023) Operational Failure of Vertical Roller Attached to a Grinding Mill: Root Cause Analysis. Journal of Failure Analysis and Prevention, 23. pp. 2322-2330.

Adediran, A A and Akinwande, A A and Adesina, O S and Agbaso, V and Balogun, O A and Kumar, B Ravi (2023) Modeling and optimization of green-Al 6061 prepared from environmentally source materials. Heliyon, 9(8).

Seshu Kumar, A and Khadeer, S A and Rajinikanth, V and Pahari, Santanu and Kumar, B Ravi (2021) Evaluation of bond interface characteristics of rotary friction welded carbon steel to low alloy steel pipe joints. Materials Science and Engineering A, 824.

Deva, A and Pandey, P and Alam, M S and Sahoo, Biraj K and Kumar, B Ravi and Choudhary, S G and Jha, B K (2021) Processing of Low-Carbon Deep-Drawing Steel with High Plastic Anisotropy Using Two-Stage Batch Annealing Cycle. Journal of Materials Engineering and Performance.

Miadad, S J and Venugopalan, T and Halder, N and Kumar, B Ravi (2020) On the Study of Batch Annealing Parameter Optimization for Higher Lankford Value in High Phosphorus Interstitial Free High Strength Steel. Journal of Materials Engineering and Performance, 29. pp. 7598-7606.

Khadeer, S A and Babu, P R and Kumar, B Ravi and Kumar, A Seshu (2020) Evaluation of friction welded dissimilar pipe joints between AISI 4140 and ASTM A 106 Grade B steels used in deep exploration drilling. Journal of Manufacturing Processes, 56 (Part A) (IF-4.086). pp. 197-205.

Poddar, D and Chakraborty, A and Kumar, B Ravi (2019) Annealing twin evolution in the grain-growth stagnant austenitic stainless steel microstructure. Materials Characterization, 155.

Patel, N K and Walunj, Mahesh G and Kumar, B Ravi (2019) Importance of Martensite Spatial Distribution at Large Volume Fractions in Imparting Ductility in High-Strength Dual-Phase Steel. Journal of Materials Engineering and Performance, 28(3). pp. 1391-1401.

Sharma, Sailaja and Kumar, B Ravi and Kashyap, B P and Prabhu, N (2018) Effect of stored strain energy heterogeneity on microstructure evolution of 90% cold rolled AISI 304L stainless steel during interrupted annealing treatment. Materials Characterization, 140 (IF-2.714). pp. 72-85.

Sharma, Sailaja and Kumar, B Ravi and Kashyap, B P and Prabhu, N (2018) Effects of concurrent strain induced martensite formation on tensile and texture properties of 304L stainless steel of varying grain size distribution. Materials Science and Engineering: A Structural materials properties microstructure, 725 (IF-3.094). pp. 215-227.

Kumar, B Ravi and Singh, Vishal and Nanda, T and Adhikary, M and Haldar, Nimai and Venugopalan, T (2018) Effect of Tailoring Martensite Shape and Spatial Distribution on Tensile Deformation Characteristics of Dual Phase Steels. Journal of Engineering Materials and Technology, 140(2) (IF- 1.141).

Nanda, T and Kumar, B Ravi and Singh, V (2017) A Simplified Micromechanical Modeling Approach to Predict the Tensile Flow Curve Behavior of Dual-Phase Steels. Journal of Materials Engineering and Performance, 26(1) (IF-1.331). pp. 5180-5187.

Mittal, M and Nanda, T and Kumar, B Ravi and Singh, V (2017) Effect of inter-critical annealing parameters on ferrite recrystallization and austenite formation in DP 590 steel. Journal Materials and Manufacturing Processes , 32(11) (IF-2.274). pp. 1231-1238 .

Singh, Virendar and Adhikary, M and Venugopalan, T and Chakraborty, A and Nanda, T and Kumar, B Ravi (2017) Role of recrystallization and pearlite dissolution in industrial processing of DP590 steels. Materials and Manufacturing Processes, 32(16) (IF-2.274). pp. 1806-1816.

Sharma, S and Nanda, T and Adhikary, M and Venugopalan, T and Kumar, B Ravi (2016) A simulation study of pearlite-to-austenite transformation kinetics in rapidly heated hot-rolled low carbon steel. Materials and Design, 107 (IF-4.364). pp. 65-73.

Ghosh, R N and Vaish, A K and Singh, S R and Ghosh Chowdhury, S and Humane, M M and De, P K and Minj, R K and Kumar, B Ravi (2007) High Strength Formable Steels for Automobile Applications. Collaborative (CLP). CSIR-NML, Jamshedpur. (Submitted)

Singh, Raghuvir and Ghosh Chowdhury, S and Chattoraj, I and Das, S K and Kumar, B Ravi and De, P K (2007) Optimization of Sensitization and Intergranular Corrosion (IGC) Resistance of 304L Stainless Steel by Grain Boundary Engineering. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)