Items where Author is "Kumar, A"

Article

Banerjee, Riya and Chakladar, S and Kumar, A and Chattopadhyay, S K and Chakravarty, S (2024) Petrology and association of rare earth elements in magmatically altered high‑ash coal of Indian origin. International Journal of Coal Science & Technology, Online.

Kumar, Arun and Agarwal, Ashish and Kumar, A and Kumar, Sunil (2023) Prediction of hot metal temperature in a blast furnace iron-making process using multivariate data analysis and machine learning methodology. Metallurgical Research & Technology, 120(6).

Chakrabarty, A and Sahu, R and Kumar, A and Bar, H N and Hitzler, L and Khutia, N (2023) Finite element evaluation of fracture toughness and crack propagation in LB-PBF AlSi10Mg. Continuum Mechanics and Thermodynamics, 35(2). pp. 677-697.

Kishore, Kaushal and Kushwaha, S and Teja, K S P and Chandan, A K and Mukherjee, M and Adhikary, M and Kumar, A (2022) Sigma phase embrittlement-induced failures of heat-resistant stainless steel traveling grate links. Engineering Failure Analysis, 144.

Kumar, G and Bar, H N and Kumar, A (2022) Influence of Dynamic Strain Aging on Ratcheting Deformation Behavior of SA333 Gr-6 Steel. Journal of Materials Engineering and Performance.

Kumar, A and Rao, A S and Dey, Shobhana (2021) Conservation of Resources by Processing of Waste Dumped Iron Ore Fines. Journal of Metallurgy and Materials Science, 63 (3-. pp. 55-69. (Unpublished)

Kumar, G and Kumar, A and Bar, H N (2021) Effect of dynamic strain aging on cyclic deformation in piping material SA333 Gr-6 steel. International Journal of Pressure Vessels and Piping, 194 Part A.

Ghosh, Rachit and Gupta, S K and Kumar, A and Kumar, S (2019) Durability and Mechanical Behavior of Fly Ash-GGBFS Geopolymer Concrete Utilizing Bottom Ash as Fine Aggregate. Journal Transactions of the Indian Ceramic Society, 78(1). pp. 24-33.

Kumar, A and Arora, K S and Gupta, R K and Harmain, G A (2019) Investigation on interface morphology and joint configuration of dissimilar sheet thickness FSSW of marine grade Al alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(9). pp. 1-13.

Anand, Kunjan Kumar and Mahato, B and Haase, C and Kumar, A and Ghosh Chowdhury, S (2018) Correlation of defect density with texture evolution during cold rolling of a Twinning-Induced Plasticity (TWIP) steel. Materials Science and Engineering A, 711 (IF-3.094). pp. 69-77.

Bhattacharjee, G and Kushwaha, O S and Kumar, A and Khan, M Y and Patel, J N and Kumar, Rajneesh (2017) Effects of Micellization on Growth Kinetics of Methane Hydrate. Industrial & Engineering Chemistry Research, 56(13) (IF-2.843). pp. 3687-3698.

Ghorai, S and Mandal, G K and Roy, S and Minj, R K and Agarwal, Anup and Singh, D P and Kumar, A and Ramna, R B V (2017) Treatment of LF slag to prevent powdering during cooling. Journal of Mining and Metallurgy Section B- Metallurgy, 53(2)B (IF-0.8). pp. 123-130.

Kumar, A and Tripathi, B and Mishra, S and Kumar, P and Sharma, I H (2015) Power consumption and design optimization of a sustainable H fuel cell powered vehicle. Journal of Metallurgy and Materials Science, 57(3). pp. 157-165.

Malathi, M and Godiwalla, K M and Kumar, A and Chacko, E Z and Ajmani, S K and Ranganathan, S (2014) Generation of magnesium for in-situ desulphurisation–investigations on influence of inert gas flowrate. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 123/2 (IF-0.690). pp. 67-74.

Kumar, A and Chacko, Z E and Malathi, M and Godiwalla, K M and Ajmani, S K and Ranganathan, S (2014) Desulfurization of Hot Metal Through In Situ Generation of Magnesium in 30-kg Molten Iron Bath-Influence of Inert Gas Flow Rate. Steel Research International, 85(5) (IF-1.023). pp. 927-934.

Sinha, Deependra Kumar and Kumar, A and Kumar, Sanjay (2014) Development of Geopolymer Concrete from Fly Ash and Bottom Ash Mixture. Transactions of the Indian Ceramic Society, 73(2) (IF-0.233). pp. 143-148.

Sinha, Deependra Kumar and Kumar, A and Kumar, Sanjay (2014) Reduction of pollution by using Fly ash, bottom ash and granulated blast furnace slag in geopolymer building materials. Scholars Journal of Engineering and Technology (SJET), 1(3). pp. 177-182.

Kumar, A and Singh, R J and Mitra, A and Panda, A K (2008) Preparation of Fe and Co based amorphous wires by in-water quenching process. Materials Science and Technology, 24 (5). pp. 618-622.

Alphonsa, J and Sinha, G and Kumar, A and Jhala, G and Tiwari, S K and Gupta, S and Rayjada, P A and Chauhan, N and Raole, P M and Mukherjee, S (2008) Effect of frequency on the properties of plasma nitrided AISI 4340 steel. Journal of Metallurgy and Materials Science, 50 (2). pp. 119-125.

Panda, A K and Mohanta, Ojaswini and Kumar, A and Ghosh, M and Mitra, A (2007) A Potential Co36Fe36Si4B20Nb4 nanocrystalline alloy for high temperature soft magnetic applications. Philosophical Magazine, 87 (11). pp. 1671-1682.

Mukherjee, Surojit and Raole, P M and Kumar, A and Chattoraj, I and Rao, K R M and Manna, I (2004) Studies on low-energy nitrogen plasma immersion ion implantation on austenitic stainless steel and Cu-strengthened HSLA-100 steel. Surface and Coatings Technology, 186 (1-2). pp. 282-286.

Chattoraj, I and Kumar, A and Das, Swapan K and Tarafder, Mita and Tarafder, S (2003) Factors influencing the extent of hydrogenenhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading. Zeitschrift Fur Metallkunde , 94 (11). pp. 1228-1233.

Singh, Ratnakar and Ravi Kumar, B and Kumar, A and Dey, P K and Chattoraj, I (2003) The effects of cold working on sensitization and intergranular corrosion behavior of AlSl 304 stainless steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science , 34-A (11). pp. 2441-2447.

Singh, D D N and Kumar, A (2003) A fresh look at ASTM g 1-90 solution recommended for cleaning of corrosion products formed on iron and steels. Corrosion Science, 59 (11). pp. 1029-1036.

Kumar, A and Tarafder, S and Mukherjee, Surojit and Das, Swapan K and Ravi Kumar, B and Chattoraj, I (2003) Effect of plasma ion implantation on the hydrogen embrittlement of Cu strengthened HSLA-100 steel. Journal of Materials Science, 38 (12). pp. 2667-2671.

Saha, A K and Kumar, A and Akerkar, D D and Shahani, M J (1972) Production of iron powder from ferrous chloride by hydrogen reduction. NML Technical Journal, 14 (3). pp. 113-118.

Saha, A K and Kumar, A and Akerkar, D D and Shahani, M J (1971) Utilization of indigenous steel scrap for iron powder production-A study of dissolution rates of scrap in hydrocholoric acid. NML Technical Journal, 13 (4). pp. 93-99.

Book or NML Publication

Sengupta, B and Kumar, A and Hashim, M A and Ramakanth, C (1998) Nickel and chromium in wastewater - The Malaysian experience. In: Environmental & Waste Management in NoN-Ferrous Metallurgical Industries. NML Jamshedpur, Jamshedpur, pp. 27-51. ISBN 81-87053-28-7

Project Reports

Kailath, A J and Panda, A K and Minz, R K and Das, Goutam and Ghosh, M and Kumar, A and Giri, A K and Mahato, B (2006) Synthesis and characterisation of Copper based bulk amorphous/nanophase alloys as melt spun ribbons. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Ghosh, Sukomal and Kumar, A and Das, Swapan K and Das, Goutam and De, P K and Chakravarty, S (2006) Development of cast Al-Fe-V-Si alloys as a wear resistant and elevated temperature material for applications in engineering industries. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)

Conference or Workshop Item

Singh, Raghuvir and Dey, P K and Kumar, A and Das, S K and Ravi Kumar, B and Chattoraj, I (2001) Intergranular Corrosion of Deformed SS304. In: National Seminar on Corrosion and Its Prevention(NSCP-2001), 13-14, December, 2001, National Metallurgical Laboratory, Jamshedpur.

Kumar, A and Sen, K (2000) Design and Construction Aspects of Mini Coal Flotation Plant. In: UNSPECIFIED.