Items where Author is "Chandan, A K"

Article

Kishore, Kaushal and Chandan, A K and Hung, P T and Kumar, Saurabh and Ranjan, Manish and Kawasaki, M and Gubicza, Jeno (2023) Effect of Si on the evolution of plasticity mechanisms, grain refinement and hardness during high-pressure torsion of a non-equiatomic CoCrMnNi multi-principal element alloy. International Journal of Plasticity, 169 .

Chandan, A K and Murugaiyan, Premkumar and Chowdhury, S G (2023) Temperature-dependent stacking fault energy, deformation behavior, and tensile properties of a new high-entropy alloy. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 883 .

Shivam, V and Kar, S and Bansal, G K and Chandan, A K and Sahoo, Biraj K and Mandal, G K and Mukhopadhyay, N K and Srivastava, V C (2023) A novel Fe-rich non-equiatomic medium-entropy alloy with superior mechanical properties. Journal of Alloys and Compounds, 952 .

Kishore, Kaushal and Chandan, A K and Purty, M and Karthik, V and Mishra, G and Sahoo, Biraj K and Meena, L K and Chakraborty, J (2023) Effect of microstructure on corrosion behavior of medium manganese steel. Materials Letters, 330 .

Kishore, Kaushal and Kushwaha, S and Teja, K S P and Chandan, A K and Mukherjee, M and Adhikary, M and Kumar, A (2023) Sigma phase embrittlement-induced failures of heat-resistant stainless steel traveling grate links. Engineering Failure Analysis, 144 .

Kishore, Kaushal and Chandan, A K and Hung, P T and Kumar, Saurabh and Kawasaki, M and Gubicza, Jeno (2022) On the enhanced hardening ability and plasticity mechanisms in a novel Mn-added CoCrNi medium entropy alloy during high-pressure torsion. Journal of Alloys and Compounds, 904 .

Sahoo, Biraj K and Srivastava, V C and Chandan, A K and Chowdhury, S G (2022) Enhancing the properties of Al-Ni added medium Mn steel by tailoring B2-NiAl precipitates through aging treatment. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 837 .

Chandan, A K and Kishore, Kaushal and Hung, P T and Ghosh Chowdhury, S and Kawasaki, M and Gubicza, Jeno (2022) Effect of nickel addition on enhancing nano-structuring and suppressing TRIP effect in Fe40Mn40Co10Cr10 high entropy alloy during high-pressure torsion. International Journal of Plasticity, 150 .

Kishore, Kaushal and Chandan, A K and Sahoo, Biraj K and Meena, L K (2022) Novel observation of dominant role of strain rate over strain during pre-straining on corrosion behaviour of 304L austenitic stainless steel. Materials Chemistry and Physics, 277 .

Bansal, G K and Tripathy, S and Chandan, A K and Rajinikanth, V and Ghosh, C and Srivastava, V C and Chowdhury, S G (2021) Influence of quenching strategy on phase transformation and mechanical properties of low alloy steel. Materials Science and Engineering: A, 826, article no. 141937 (5.23). pp. 1-15.

Mishra, G and Chandan, A K (2021) Effect of cold deformation extent and ART annealing duration on the microstructure and mechanical properties of a medium manganese steel. Materials Chemistry and Physics, 271 .

Sahoo, Biraj K and Srivastava, V C and Chandan, A K and Chhabra, H S and Chowdhury, S G (2021) Evolution of microstructure and deformation behavior in Al–Ni added medium-Mn steel processed through intercritical / cold rolling and annealing. Materials Science and Engineering A, 824 .

Chandan, A K and Hung, P T and Kishore, K and Kawasaki, M and Chakraborty, J and Gubicza, Jeno (2021) On prominent TRIP effect and non-basal slip in a TWIP high entropy alloy during high-pressure torsion processing. Materials Characterization, 178 .

Chandan, A K and Tripathy, S and Sen, B and Ghosh, M and Ghosh Chowdhury, S (2021) Temperature dependent deformation behavior and stacking fault energy of Fe40Mn40Co10Cr10 alloy. Scripta Materialia, 199 (IF-5.079). p. 113891.

Chandan, A K and Sahoo, Biraj K and Bansal, G K (2021) Medium Manganese Steel: A Promising Candidate for Automotive Applications. Steel Tech, 15(2) . pp. 60-66.

Kishore, Kaushal and Kumar, R Gaurav and Chandan, A K (2021) Critical assessment of the strain-rate dependent work hardening behaviour of AISI 304 stainless steel. Materials Science and Engineering A, 803 . p. 140675.

Bansal, G K and Chandan, A K and Ghosh, C and Srivastava, V C and Dutta, Monojit and Ghosh Chowdhury, S (2021) The Pros and Cons of an Energy-Efficient Q&P Approach to Develop Advanced Steels. Next Generation Materials and Processing Technologies, Part of the Springer Proceedings in Materials book series (SPM, volume 9) . pp. 15-26.

Bansal, G K and Chandan, A K and Srivastava, V C and Gopalakrishna, K and Das, Goutam and Rajkumar, S and Ghosh Chowdhury, S and Tarafder, S (2021) Studies on Tensile Behaviour of Selective Laser Melted 316L Stainless Steel Using SEM Straining Stage. Transactions of the Indian National Academy of Engineering . pp. 1-11.

Bansal, G K and Chandan, A K and Mandal, G K and Srivastava, V C (2020) High Entropy Alloys: An Overview on Current Developments" in the book "High Entropy Alloys: Innovations, Advances, and Applications. High Entropy Alloys: Innovations, Advances, and Applications (Book). pp. 1-68.

Chandan, A K and Tripathy, S and Ghosh, M and Chowdhury, S G (2020) Evolution of Substructure of a Non-equiatomic FeMnCrCo High Entropy Alloy Deformed at Ambient Temperature (vol 50, pg 128, 2019). Metallurgical and Materials Transactions A-physical metallurgy and materials science, 51(3) (IF-2.050). p. 1438.

Bansal, G K and Sahoo, Biraj and Chandan, A K (2020) Metallurgical Perspective on Quench and Partitioned Advanced High Strength Steels. Steel Tech, 14(4) (NonSCI). pp. 60-64.

Chandan, A K and Bansal, G K and Kundu, J and Chakraborty, J and Ghosh Chowdhury, S (2019) Effect of prior austenite grain size on the evolution of microstructure and mechanical properties of an intercritically annealed medium manganese steel. Materials Science and Engineering: A , 768 (IF-4.081). p. 138458.

Chandan, A K and Mishra, G and Mahato, B and Ghosh Chowdhury, S and Kundu, S and Chakraborty, J (2019) Stacking Fault Energy of Austenite Phase in Medium Manganese Steel. Metallurgical and Materials Transactions A , 50(10) (IF-1.985). pp. 4851-4866.

Chandan, A K and Tripathy, S and Ghosh, M and Ghosh Chowdhury, S (2019) Evolution of Substructure of a Non-equiatomic FeMnCrCo High Entropy Alloy Deformed at Ambient Temperature. Metallurgical and Materials Transactions A, 50(11) (IF-1.985). pp. 5079-5090.