Items where Author is "Bandyopadhyay, D"

Article

Sau, D C and Das, Suchandan K and Bandyopadhyay, D and Mandal, G K (2018) A reduced order mathematical model of the blast furnace raceway with and without pulverized coal injection for real time plant application. International Journal of Modelling and Simulation, online . pp. 1-12.

Kamaraj, A and Mandal, G K and Minj, R K and Misra, S and Bandyopadhyay, D (2017) Characterization and Evolution of Non-metallic Inclusions in Fe–Al–Si–O System. Transactions of the Indian Institute of Metals, 70(7) (IF-0.533). pp. 1887-1899.

Pal, J and Ghorai, S and Bandyopadhyay, D and Ghosh, Sukomal (2015) Performance Assessment of Partially Pre-fused Synthetic Flux in Basic Oxygen Steel Making. Journal of Iron and Steel Research, International, 22 (IF-0.675). pp. 916-923.

Ashok, K and Mandal, G K and Bandyopadhyay, D (2015) Theoretical Investigation on Deoxidation of Liquid Steel for Fe–Al–Si–O System. Transactions of Indian Institute of Metals, 68 Suppl 1 (IF-0.615). pp. 9-18.

Mandal, G K and Sau, D C and Das, Suchandan K and Bandyopadhyay, D (2014) A Steady State Thermal and Material Balance Model for an Iron Making Blast Furnace and Its Validation with Operational Data. Transaction of the Indian Institute of Metals, 67(2) (IF-0.427). pp. 209-221.

Pal, J and Goswami, M C and Ghosh, Dinabandhu and Bandyopadhyay, D and Ghosh, S (2013) Behavior of fluxed lime iron oxide pellets in hot metal bath during melting and refining. International Journal of Minerals, Metallurgy and Materials, 20(4) (IF-0.69). pp. 329-337.

Pal, J and Ghorai, S and Goswami, M C and Bandyopadhyay, D and Ghosh, S (2011) Agglomeration of Waste Iron-oxide for use in Steel Making. Steel Tech, 6 (1). pp. 1-6.

Das, Suchandan K and Kumari, Amrita and Bandyopadhyay, D and Akbar, S A and Mandal, G K (2011) A mathematical model to characterise effects of liquid hold-up on bosh silicon transport in the dripping zone of a blast furnace. Applied Mathematical Modelling, 35 . pp. 4208-4221.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2010) Performance Assessment of CO2 Treated Fluxed Iron Oxide Pellets in Basic Oxygen Steel Making Process. ISIJ International, 50 (1). pp. 105-114.

Pal, J and Ghorai, S and Goswami, M C and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2009) Development of Fluxed iron oxide pellets strengthened by CO2 treatment for use in basic oxygen steel making. ISIJ International, 49 (2). pp. 210-219.

Pal, J and Goswami, M C and Mahato, B and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2009) High Temperature Characterization of CO2 Treated Fluxed Pellets Developed for Basic Oxygen Steel Making. ISIJ International, 49 (9). pp. 1325-1332.

Vaish, A K and Singh, S D and Minj, R K and Bandyopadhyay, D (2004) An insight into energy saving measures in an integrated steel plant. Journal of Metallurgy and materials Science, 46 (4). pp. 213-231.

Bandyopadhyay, D and Singh, S D and Sanyal, D and Singh, K N (2003) A study on dissolution kinetics of carbon in liquid iron bath. Chemical Engineering Journal, 94 (2). pp. 79-92.

Pathak, L C and Bandyopadhyay, D and Srikanth, S and Das, Swapan K (2001) Effect of heating rates on the synthesis of Al2O3–SiC composites by the self-propagating high-temperature synthesis (SHS) technique. Journal of the American Ceramic Society, 84 (5). pp. 915-920.

Bandyopadhyay, D and Pathak, L C and Mukherjee, I and Das, S K and Ganguly, R G and Ramachandrarao, P (1997) Fabrication of Al2O3-SiCw in situ composite through a new combustion technique. Materials Research Bulletin, 32 (1). pp. 75-82.

Bandyopadhyay, D and Ghosh, Arindam (1996) Validity of rate equation based on Langmuir-Hinshelwood mechanism for gasification of carbon - A reappraisal. Steel Research, 67 (3). pp. 79-86.

Bandyopadhyay, D and Chakravorty, N (1993) A study on the kinetics of iron-oxide reduction by solid carbon. Steel Research, 64 (7). pp. 340-345.

Prakash, Ved and Tewari, C R and Bandyopadhyay, D (1981) Kinked hysteresis loop in 36-percent Ni-Fe alloy. Indian journal of pure & applied physics, 19 (5). pp. 492-494.

Conference or Workshop Item

Bandyopadhyay, D and Sau, D C (2017) Low temperature reduction of iron oxide fines. In: Proceedings of 3rd International Conference on Science and Technology of Ironmaking and Steelmaking’ , 11-13th December , 2017, IIT, Kanpur.

Minj, R K and Singh, S D and Ghorai, S and Paswan, Dayanand and Bandyopadhyay, D (2013) Development of a suitable process for effective and efficient de-phosphorisation of liquid metal in induction furnace. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Sau, D C and Das, Suchandan K and Bandyopadhyay, D (2013) A Mathematical Model of The Raceway for Real time Application to an Operating Blast Furnace with Pulverized Coal Injection. In: Proceeding of the International Conference on Science and Technology of Ironmaking and Steelmaking, December 16-18, 2013, CSIR-NML Jamshedpur.

Palit Sagar, S and Prakash, Amit and Bandyopadhyay, D and Parida, N (2011) Feasibility of using ultrasonic technique to measure the blast furnace lining thickness. In: Advances in Analytical Techniques and Characterisation of Materials, July 5-7, 2011, RDCIS, Ranchi.

Bandyopadhyay, D (2008) Kinetic Analysis of Metallurgical Systems. In: Proceedings on Extraction of Nonferrous Metals and their Recycling- A training Programme, Feb. 27-29th, 2008, NML, Jamshedpur.

Bandyopadhyay, D and Pathak, L C and Das, S K and Ravi Kumar, B and Ramachandrarao, P (1997) In-Situ Fabrication of Ceramic Matrix Composites by RH-SHS Technique. In: Proceedings of Golden Jubilee International Conference on Recent Advances in Metallurgical Processes Vol-1, 16-19 July 1997, IIS, Bangalore.