Items where Author is "Ammasi, A"
Group by: Item Type | No Grouping
Jump to: Article | Conference or Workshop Item | Patent | Thesis
Number of items: 16.
Pal, J and Ammasi, A and Bandyopadhyay, B S and Dwarapudi, Srinivas and Paul, I (2022) An innovative approach to replace bentonite in hematite ore pelletizing with organic binder. Mineral Processing and Extractive Metallurgy Review .
Ammasi, A and Pal, Jagannath (2022) Kinetics of Carbon Oxidation During Induration of Hematite Ore Pellet. Mining Metallurgy & Exploration .
Ammasi, A and Pal, J (2021) Blast Furnace Flue Dust as a Potential Carbon Additive in Hematite Ore Pellet. Mineral Processing and Extractive Metallaurgy Review, Online published (IF-2.76).
Adeleke, A A and Odusote, J K and Ikubanni, P P and Orthadahwe, T A and Lasode, O A and Ammasi, A and Kumar, K (2021) Ash analyses of bio‑coal briquettes produced using blended binder. Scientific Reports (IF-3.99).
Ammasi, A (2021) Development of synthetic slag for desulphurisation of the steel during steelmaking in induction furnace. Advances in Materials and Processing Technologies, online .
Ammasi, A (2020) Effect of Heating Rate on Decomposition Temperature of Goethite Ore. Transactions of The Indian Institute of Metals, 73(1) (IF-1.205). pp. 93-98.
Ammasi, A and Pal, J (2020) Reaction Mechanism of In-situ Carbon in Hematite Ore Pellet during Induration. Mineral Processing and Extractive Metallurgy Review (IF-2.785).
Adeleke, A A and Odusote, J K and Ikubanni, P P and Lasode, O A and Agboola, O O and Ammasi, A and Ajao, K R (2018) Dataset on the evaluation of chemical and mechanical properties of steel rods from local steel plants and collapsed building sites. Data in Brief, 21 (IF-). pp. 1552-1557.
Pal, J and Ghorai, S and Ammasi, A and Hota, S K and Koranne, V M and Venugopalan, T (2017) Improving reductibility of iron ore pellets by optimization of physical parameters. Journal of Mining and Metallurgy Section B- Metallurgy, 53(1) (IF-0.804). pp. 37-46.
Ammasi, A and Pal, J (2016) Replacement of bentonite in hematite ore pelletisation using a combination of sodium lignosulphonate and copper smelting slag. Ironmaking and Steelmaking, 43(3) (IF-0.985). pp. 203-213.
Conference or Workshop Item
Ammasi , A and Ashok, K and Thatoi, S and Singh, D.P (2020) Flux Development for Dephosphorization of Steel in Induction Furnace. In: International Conference on Steelmaking and Casting - Sustainable Technology and Practices (SMCSTP2020) , 6 - 7 February 2020, Jamshedpur, India.
Ammasi , A and Pal, J (2018) Influence of addition of carbon on Pelletization of Hematite Ore Fines. In: Asia Steel International Conference 2018, 6-9 Feb., 2018, Mayfair Hotel, Bhubaneswar, India.
Ammasi , A and Pal, J (2018) Effect of Cooling Rate on Cold Compressive Strength of Carbon-Burdened Hematite Pellets. In: MINERAL PROCESSING Technology -2018, 10-12 Oct,2018, Dhanbad.
Ammasi, A and Pal, J (2017) Influences of carbonaceous materials on the quality of hematite ore pellets. In: The 3rd International Conference on Science and Technology of Ironmaking and Steelmaking (STIS-2017), Dec 11-13,2017, IIT Kanpur.
NA (2015) An Improved process for preparation of iron oxide pellets using sodium Lignosulphonate containing wastes and copper smelting slag replacing bentonite. NA.
Ammasi, A and Pal, J (2014) Effect of an organic binder and copper slag on pelletization of hematite ore eliminating bentonite. Masters thesis, AcSIR, CSIR-NML , .