Items where Subject is "Materials Science > Composites"

Article

Adediran, A A and Akinwande, A A and Adesina, O S and Agbaso, V and Balogun, O A and Kumar, B Ravi (2023) Modeling and optimization of green-Al 6061 prepared from environmentally source materials. Heliyon, 9(8) .

Ali, F and Scudino, S and Liu, G and Srivastava, V C and Mukhopadhyay, N K and Khoshkhoo, M S and Prashanth, K G and Uhlenwinkel, V and Calin, M and Eckert, J (2012) Modeling the strengthening effect of Al–Cu–Fe quasicrystalline particles in Al-based metal matrix composites. Journal of Alloys and Compounds, 536S . S130-S133.

Balani, K (2020) An opinion on hydroxyapatite based bio-composites as bone-scaffolds. Journal of Metallurgy and Materials Science, 62(3-4) . pp. 13-19.

Balaraju, J N and Sankara Narayanan, T S N and Seshadri, S K (2003) Electroless Ni–P composite coatings. Journal of Applied Electrochemistry, 33 (9). pp. 807-816.

Balaraju, J N and Sankara Narayanan, T S N and Seshadri, S K (2006) Structure and phase transformation behaviour of electroless Ni–P composite coatings. Materials Research Bulletin, 41 (4). pp. 847-860.

Basariya, M R and Srivastava, V C and Mukhopadhyay, N K (2015) Effect of Milling Time on Structural Evolution and Mechanical Properties of Garnet Reinforced EN AW6082 Composites. Metallurgical and Materials Transaction A, 46A(3) (IF-1.730). pp. 1360-1373.

Baskaran, Irusen and Sankara Narayanan, T S N and Seshadri, S K (2001) Evaluation of the corrosion resistance of electroless Ni-P and Ni-P composite coatings by electrochemical impedance spectroscopy. Journal of Solid State Electrochemistry, 5 (5). pp. 334-338.

Chakladar, S and Mohanty, Ashok and Mandal, S and Chakravarty, S (2019) Structural evaluation of coking component of West Bokaro coal of Indian origin. Journal International Journal of Coal Preparation and Utilization (IF-2.020). pp. 1-14.

Goudar, D M and Rudrakshi, G B and Reddy, G J and Srivastava, V C and Wagamode , J (2012) Microstructural and hardness of spray deposited Al-30Mg2Si-2Cu alloy in solutionized and aged conditions. Materials Science : An Indian Journal, 0974-7486, 8 (8). pp. 303-308.

Goudar, D M and Rudrakshi, G B and Srivastava, V C and Reddy, J and Joshi, A G (2011) Spray Deposition Process of Hypereutectic Al – Si alloys: An overview. International Journal of Scientific and Engineering Research, ISSN 2229-5518, 2 (6). pp. 1-10.

Grahvardhan, G and Singh, J and Kumar, S and Patel, V K and Gangil, B (2019) Study of mechanical and abrasive wear behavior of glass fibre reinforced epoxy-talc/mustard cake hybrid compositions. Journal of Metallurgy and Materials Science, 61(1) . pp. 11-23.

Kamaraj, A and Hore, S and Sathyamoorth, P (2017) Estimation and Analysis of Excess Oxygen Input into Ladle During Liquid Steel Tapping. Transactions of the Indian Institute of Metals, 70(9) (IF-0.533). pp. 2465-2476.

Kaushik, V and Bar, H N and Ghosh, A (2021) Influence of extremely cold environmental conditions on interfacial fracture phenomenon of aerospace grade unidirectional composites. Thin-Walled Structures, 161 .

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2009) Corrosion resistance of electrodeposited Ni–B and Ni–B–Si3N4 composite coatings. Journal of Alloys and Compounds, 480 (2). pp. 765-770.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2008) Electrodeposited Ni–B–Si3N4 composite coating: Preparation and evaluation of its characteristic properties. Journal of Alloys and Compounds, 466 (1-2). pp. 412-420.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2012) Electroless Ni-B-Si3N4 composite coating: deposition and evaluation of its characteristics properties. Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 42(7) . pp. 920-927.

Krishnaveni, K and Sankara Narayanan, T S N and Seshadri, S K (2009) Wear resistance of electrodeposited Ni–B and Ni–B–Si3N4 composite coatings. Journal of Materials Science, 44 (2). pp. 433-440.

Kumar, D Sameer and Suman, K N S and Poddar, Palash (2020) Performance evaluation of surface modified nano Al2O3 (p) reinforced AZ91E composites under impact and fatigue loading conditions. Strojnícky časopis – Journal of Mechanical Engineering, 70(1) .

Kumar, D Sameer and Suman, K N S and Poddar, Palash (2020) A study on the impact and fatigue failure of AZ91E–Ni coated alumina composites. Canadian Metallurgical Quarterly, 59(3) . pp. 316-323.

Mandal, G K and Rajnikanth, V and Kumar, S and Mishra, D and Misra, S and Srivastava, V C and Ghosh Chowdhury, S (2017) Microstructure Evolution During Hot Deformation of a Micro-Alloyed Steel. Transactions of the Indian Institute of Metals, 70(4) (IF 0.533). pp. 1019-1033.

Mishra, V and Singh, K.N. (2017) Microstructural relation of macerals with mineral matter in coals from Ib valley and Umaria, Son-Mahanadi basin, India. International Journal of Coal Science & Technology, 4(2) (IF-). pp. 191-197.

Poddar, Palash (2018) Review of recent studies in magnesium matrix composites fabricated by stir casting. Journal of Metallurgy and Materials Science, 60(3) . pp. 125-137.

Prasad, Sanjay and Maity, S K and Kumari, Aarti and Randhawa, N S and Shekher, M C (2019) Preparation of zinc powder from zinc dross. Journal of Metallurgy and Materials Science, 61(3) . pp. 119-123.

Prashanth, K G and Shahabi, H S and Attar, H and Srivastava, V C and Eckert, J and Scudino, S and Uhlenwinkel, V and Ellendt, N (2015) Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting. Additive Manufacturing, 6 . pp. 1-5.

Rao, Govinda R and Sahoo, K L and Ganguly, R I and Dash, R R and Narasaiah, N (2017) Effect of Flyash Treatment on the Properties of Al-6061 Alloy Reinforced with SiC–Al2O3–C Mixture. Transactions of the Indian Institute of Metals, 70(10) (IF-0.533). pp. 2707-2717.

Rudresh, M and Maruthi, B H (2019) Mechanical assisted modification of halloysite nano clay: expoxy composites. Journal of Metallurgy and Materials Science, 61(2) . pp. 83-93.

Sinha, Shivendra and De, S and Mishra, D and Shekhar, S and Agarwal, A and Sahu, K K (2022) Phosphonomethyl iminodiacetic acid functionalized metal organic framework supported PAN composite beads for selective removal of La(III) from wastewater: Adsorptive performance and column separation studies. Journal of Hazardous Materials, 425 .

Srivastava, V C and Singh, T and Ghosh Chowdhury, S and Jindal, Vikas (2012) Microstructural Characteristics of Accumulative Roll-Bonded Ni-Al-Based Metal-Intermetallic Laminate Composite. Journal of Materials Engineering and Performance, 21(9) . pp. 1912-1918.

Venkata Siva, S B and Sahoo, K L and Ganguly, R I and Dash, R R (2012) Effect of Hot Working on Structure and Tribological Properties of Aluminium Reinforced with Aluminium Oxide Particulates. Journal of Materials Engineering and Performance, 21 (7). pp. 1226-1231.

Zala, D M and Rajput, U P and Darji, S B and Rao, V J and Vaish, A K (2019) Graphene-recent advancements in its extraction, its comparative study with other materials and emerging applications. Journal of Metallurgy and Materials Science, 61(2) . pp. 95-108.

Book or NML Publication

UNSPECIFIED (2011) Frontiers in Mechanochemistry and Mechanical Alloying. In: Kumar, Rakesh and Srinivasan, Srikanth and Mehrotra, Surya Pratap, (eds.) Frontiers in Mechanochemistry and Mechanical Alloying. CSIR-National Metallurgical Laboratory, Jamshedpur, pp. 1-334. ISBN 97881-87053-69-8

Sankara Narayanan, T S N and Seshadri, S K (2011) Electro - and electroless deposited composite coatings: preparation, characteristics and applications. In: Encyclopedia of composites. Wiley, Hoboken, N J.

Conference or Workshop Item

Bhaskar Raju, G and Prabhakar, S and Jolly Kutty, K G and Khangaonkar, P R and Sankaran, C (1991) Cold bonded pelletization of iron ore fines. In: Third Int Symposium on beneficiation and agglomeration, 16-18 January 1991, Bhubaneswar.

Rudrakshi, G B and Reddy, G J and Goudar, D M and Vagmode, J and Srivastava, V C (2011) Microstructural and Hardness of Spray Deposited Al-30Mg 2 Si-2Cu Alloy in Solutionized and Aged Conditions. In: World Congress on Engineering and Technology, October 28 - November 02, 2011, Sanghai, China.

Srivastava, V C and Maheshwari, P and Kumar, N (2005) Preparation and Characterization of Aluminium Alloy Based Quasicrystal Reinforced Composites. In: EURO PM2005 : Powder Metallurgy Congress & Exhibitition, October 2-5, 2005, Prague, Czech Republic.

Srivastava, V C and Schneider, A and Uhlenwinkel, V and Bauckhage, K (2004) Development of 2014-Al Alloy Based SiCp Particulate Reinforced Composites by Spray Co-deposition Process. In: International Conference on Powder Metallurgy-2004, October 17-19, 2004, Vienna, Austria.

Thesis

Krishnaveni, K (2008) Studies on Ni-B and Ni-B-Si3N4 composite coatings obtained by electro- and electroless deposition processes. PhD thesis, University of Madras .

Reddy, B V Ramana (2008) Microstructural variations in Al-Cu-Y systems under metastable conditions. Masters thesis, CSIR-NML .