Items where Author is "Kar, Abhijit"

Article

Char, M and Chakrabarty, A K and Metya, A K and Kar, Abhijit (2020) Retardation Effect of Tin Multilayer on Sn-3.0Ag-0.5Cu (SAC305)-Based Solder Joint Interface. Journal of Material Engineering and Performance, 29(4) (IF-1.652). pp. 2305-2315.

Ray, Ajoy K and Kar , Abhijit and Kori, S A and Pathak , L C and Sonnad, A N (2013) Graphite-to-304SS Braze Joining by Active Metal-Brazing Technique : Improvement of Mechanical Properties. Journal of Materials Enginnering and Performance, 22(1) (IF-0.915). pp. 258-266.

Ghosh, M and Kar, Abhijit and Kumar, K and Kailas, S V (2012) Structural characterisation of reaction zone for friction stir welded aluminium–stainless steel joint. Materials Technology, 27 (2). pp. 169-172.

Bui, Q V and Nam, N D and Yoon, J W and Choi, D H and Kar, Abhijit and Kim, J G and Jung, S B (2011) Effect of Gold on the Corrosion Behavior of an Electroless Nickel/Immersion Gold Surface Finish. Journal of Electronic Materials, 40 (9). pp. 1937-1942.

Bui, Q V and Nam, N D and Choi, D H and Lee, J B and Lee, C Y and Kar, Abhijit and Kim, J G and Jung, S B (2010) Corrosion protection of ENIG surface finishing using electrochemical methods. Materials Research Bulletin, 45 (3). pp. 305-308.

Ghosh, M and Gunjan, M K and Das, Swapan K and Kar, Abhijit and Ghosh, R N and Ray, Ajoy K (2010) Effect of Mn on Sn–Ag–Cu ternary lead free solder alloy–Cu assembly: a comparative study. Materials Science and Technology, 26 (5). pp. 610-614.

Ghosh, M and Kar, Abhijit and Das, Swapan K and Ray, Ajoy K (2009) Aging Characteristics of Sn-Ag Eutectic Solder Alloy with the Addition of Cu, In, and Mn. Metallurgical and Materials Transactions A, 40A . pp. 2369-2376.

Ray, Ashok K and Roy, Nilima and Kar, Abhijit and Ray, Ajoy K and Bose, S C and Das, Goutam and Sahu, J K and Das, D K and Venkataraman, B and Joshi, Srikanth V (2009) Mechanical property and characterization of a NiCoCrAlY type metallic bond coat used in turbine blade. Materials Science and Engineering: A, 505 (1-2). pp. 96-104.

Kar, Abhijit and Ghosh, M and Ray, Ashok K and Ray, Ajoy K (2008) Effect of interfacial thickness and residual stress on the mechanical property of the alumina–stainless steel braze joint interface. Materials Science and Engineering A, 498 (1-2). pp. 283-288.

Ray, Ashok K and Goswami, B and Kar, Abhijit and Ray, Ajoy K and Das, H K and Roy, P K and Kumar, S B and Bose, S C (2008) Damage resistance of a thermal barrier coated superalloy for combustor liners in aero turbines during fatigue and creep. Canadian Metallurgical Quarterly, 47 (4). pp. 479-493.

Sinha, Arvind and Nayar, S and Kar, Abhijit and Gunjan, M K and Mahato, B and Das, Goutam and Kumar, Arun and Chabra, Aman (2008) Microhydrogel-Mediated Synthesis of Sintered Hydroxyapatite Granules. International Journal of Applied Ceramic Technology, 5 (5). pp. 458-463.

Kar, Abhijit and Ghosh, M and Ghosh, R N and Majumdar, Bhaskar S and Ray, Ajoy K (2008) Evolution of mechanical and electrical properties of tin–lead and lead free solder to copper joint interface. Materials Letters, 62 (1). pp. 151-154.

Kar, Abhijit and Chaudhuri, S and Sen, Pratik K and Ray, Ajoy K (2007) Evaluation of hardness of the interfacial reaction products at the alumina–stainless steel brazed interface by modeling of nanoindentation results. Scripta Materialia, 57 (9). pp. 881-884.

Kar, Abhijit and Ghosh, M and Majumdar, Bhaskar S and Ghosh, R N and Ray, Ajoy K (2007) Interfacial microstructure, shear strength and electrical conductivity of Sn-3 center dot 5Ag-o center dot 5In/Cu lead free soldered joints. Materials Technology, 32 (3). pp. 161-165.

Kar, Abhijit and Palit Sagar, S and Ray, Ajoy K (2007) Characterization of the ceramic–metal brazed interface using ultrasonic technique. Materials Letters, 61 (19-20). pp. 4169-4172.

Kar, Abhijit and Mandal, Sudipta and Ghosh, R N and Ghosh, T K and Ray, Ajoy K (2007) Role of Ti diffusion on the formation of phases in the Al2O3-Al2O3 brazed interface. Journal of Materials Science, 42 (14). pp. 5556-5561.

Kar, Abhijit and Ghosh, M and Ray, Ajoy K and Ghosh, R N (2007) Effect of copper addition on the microstructure and mechanical properties of lead free solder alloy. Materials Science and Engineering A, 459 (1-2). pp. 69-74.

Kar, Abhijit and Ray, Ajoy K (2007) Characterization of Al2O3–304 stainless steel braze joint interface. Materials Letters, 61 (14-15). pp. 2982-2985.

Kar, Abhijit and Mandal, Sudipta and Venkateswarlu, K and Ray, Ajoy K (2007) Characterization of interface of Al2O3–304 stainless steel braze joint. Materials Characterization, 58 (6). pp. 555-562.

Kar, Abhijit and Mandal, Sudipta and Rathod, S and Ray, Ajoy K (2006) Effect of Ti diffusivity on the formation of phases in the interface of alumina-alumina brazed with 97(Ag40Cu)3Ti filler alloy. Brazing And Soldering, Proceedings . pp. 219-225.

Conference or Workshop Item

Ghosh, M and Kar, Abhijit and Kumar, K and Kailas, S V and Das, S K and Ray, Ajoy K (2011) Evaluation of interface microstructure for friction stir welded aluminium-stainless steel plate. In: VI International Conference on Mechanochemistry and Mechanical Alloying (INCOME 2008), 1-4 December 2008, NML Jamshedpur, India.

Ghosh, M and Kar, Abhijit and Ghosh, R N and Ray, Ajoy K (2008) A comparative study on the ageing behaviour of solder alloy-cu joint assemly using lead free solder and Sn-Pb eutectic solder alloy. In: The 3rd Asian Thermal Spray Conference (ATSC 2008), 2008, Singapore.

Kar, Abhijit and Ghosh, M and Ghosh, R N and Ray, Ajoy K (2007) Comparative study of tin lead and lead free solder joint interface. In: 2 nd International Conference on Recent Advances in Composite Materials (ICRACM-2007), February, 20-23, 2007, New Delhi.

Ray, Ajoy K and Kar, Abhijit and Ghosh, M (2007) Microstructural characterization of tin lead and lead free solder joint interface. In: Inter. Symp. on Advanced Materials and Processing, ISAMP-2007, 29-30 Oct. 2007, Basaveshwar Engineering College, Bagalkot..