Items where Author is "Kamaraj, A"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Jump to: Article
Number of items: 11.

Article

Kamaraj, A and Haldar, Nimai and Murugaiyan, Premkumar and Misra, S (2020) High-Temperature Simulation of Continuous Casting Mould Phenomena. Transactions of the Indian Institute of Metals, 73(8) (IF-1.205). pp. 2025-2031.

Kamaraj, A and Dash, A and Murugaiyan, Premkumar and Misra, S (2020) Investigation on Mold Flux Melting and Consumption During Continuous Casting of Liquid Steel. Metallurgical and Materials Transactions B, Online (IF-2.035).

Prithiv, T S and Thirumurugan, G and Madan, M and Kamaraj, A (2020) Thermodynamic Assessment of Steelmaking Practices for the Production of Re-sulfur Steels. Transactions of the Indian Institute of Metals, 73(6) (IF-1.205). pp. 1595-1603.

Kamaraj, A and Mandal, G K and Roy, G G (2019) Control of Slag Carryover from the BOF Vessel During Tapping: BOF Cold Model Studies. Metallurgical and Materials Transactions B , 50(1) . pp. 438-458.

Mandal, G K and Kamaraj, A and Minj, M.M. and Das, S K and Ramanan, R B V and Venugopalan, T (2019) Development of Speciality Grade Wire by Controlling the Inclusions in High-Carbon Steel Using Synthetic Slag Treatment. Transactions of the Indian Institute of Metals, 72(2) . pp. 369-381.

Kamaraj, A and Saravana Kumar, S and Rajaguru, M (2018) State of the Art Control Measures for Aluminium Fade and SEN Clogging during Steelmaking Operations. IOP Conference Series: Materials Science and Engineering, 314 (IF-0.32).

Kamaraj, A and Hore, S and Sathyamoorth, P (2017) Estimation and Analysis of Excess Oxygen Input into Ladle During Liquid Steel Tapping. Transactions of the Indian Institute of Metals, 70(9) (IF-0.533). pp. 2465-2476.

Kamaraj, A and Mandal, G K and Minj, R K and Misra, S and Bandyopadhyay, D (2017) Characterization and Evolution of Non-metallic Inclusions in Fe–Al–Si–O System. Transactions of the Indian Institute of Metals, 70(7) (IF-0.533). pp. 1887-1899.

Chidambaram, S and Kamaraj, A (2017) Failure investigation of an industrial crankshaft made of ductile iron. Advances in natural and applied sciences, 11(8) . pp. 25-30.

Chidambaram, S and Kamaraj, A (2017) Failure investigation of an industrial crank shaft pin. Advances in Natural and Applied Sciences . pp. 1-7.

Poddar, Palash and Kamaraj, A and Murugesan, A P and Bagui, Sumanta and Sahoo, K L (2017) Microstructural features of Mg-8%Sn alloy and its correlation with mechanical properties. Journal of Magnesium and Alloys, 5(3) . pp. 348-354.

This list was generated on Sat Sep 26 01:17:19 2020 IST.