Items where Author is "Ghosh, Sukomal"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 28.

Article

Pal, J and Ghorai, S and Bandyopadhyay, D and Ghosh, Sukomal (2015) Performance Assessment of Partially Pre-fused Synthetic Flux in Basic Oxygen Steel Making. Journal of Iron and Steel Research, International, 22 (IF-0.675). pp. 916-923.

PAL, Jagannath and GHORAI, Satadal and BANDYOPADHYAY, Debajyoti and GHOSH, Sukomal (2015) Performance Assessment of Partially Pre-fused Synthetic Flux in Basic Oxygen Steel Making. JOURNAL OF IRON AND STEEL RESEARCH, INTERNATIONAL. , 22(10): 916-923 (2.1). pp. 916-923.

Mandal, D and Ghosh, M and Pal, J and Ghosh Chowdhury, S and Das, Goutam and Das, Swapan K and Ghosh, Sukomal (2014) Evolution of microstructure and mechanical properties under different austempering holding time of cast Fe–1.5Si–1.5Mn–V steels. Materials & Design, 54 (IF-3.171). pp. 831-837.

Pal, J and Ghorai, S and Venkatesh, P and Goswami, M C and Bandopadhyay, D and Ghosh, Sukomal (2013) Development of fluxed micropellets for sintering utilising iron oxide waste fines. Ironmaking & Steelmaking, 40(7) (IF-0.454). pp. 498-504.

Sahoo, K L and Mandal, D and Paul, K K and Ghosh, Sukomal (2012) Metallurgical heritage of India : Preservation and rejuvenation. Science and Culture . pp. 532-536.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2010) Performance Assessment of CO2 Treated Fluxed Iron Oxide Pellets in Basic Oxygen Steel Making Process. ISIJ International, 50 (1). pp. 105-114.

Pal, J and Ghorai, S and Goswami, M C and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2009) Development of Fluxed iron oxide pellets strengthened by CO2 treatment for use in basic oxygen steel making. ISIJ International, 49 (2). pp. 210-219.

Pal, J and Goswami, M C and Mahato, B and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2009) High Temperature Characterization of CO2 Treated Fluxed Pellets Developed for Basic Oxygen Steel Making. ISIJ International, 49 (9). pp. 1325-1332.

Ghosh, Sabita and Pal, T K and Mukherjee, Surojit and Das, Goutam and Ghosh, Sukomal (2008) Comparative study of heat-affected zone with weld and base material after post-weld heat treatment of HSLA steel using ball indentation technique. Journal of Materials Science, 43 (16). pp. 5474-5482.

Pal, J and Bandopadhyay, D and Singh, D P and Ghosh, Sukomal (2008) A comparative study for smelting of chromite ore, pellets, briquettes and sinter. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 117 (3). pp. 129-136.

Das, Goutam and Ghosh, Sabita and Bose, S C and Ghosh, Sukomal (2006) Use of ball indentation technique to evaluate room temperature mechanical properties of a gas turbine blade. Materials Science and Engineering A, 424 (1-2). pp. 326-332.

Das, Goutam and Ghosh, Sabita and Ghosh, Sukomal (2006) Structure–property correlation of EN steel and evaluation of mechanical properties through BIT. NDT & E International, 39 (2). pp. 155-161.

Das, Goutam and Ghosh, Sabita and Ghosh, Sukomal and Ghosh, R N (2005) Materials characterization and classification on the basis of materials pile-up surrounding the indentation. Materials Science and Engineering A, 408 (1-2). pp. 158-164.

Chaudhary, P N and Pal, J and Singh, D P and Singh, M and Ghosh, Sukomal (2004) Dephosphorization of steelmaking slag. Transactions of the Indian Institute of Metals, 57 (5). A5.

Das, Goutam and Ghosh, Sukomal and Ghosh Chowdhury, S and Ghosh, Sabita and Das, Swapan K and Bhattacharya, D K (2003) Investigation of sub-surface cracks in continuous cast billets. Engineering Failure Analysis, 10 (3). pp. 363-370.

Chattaraj, Mousumi and Sahoo, K L and Singh, H P and Ghosh, Sukomal (2003) Studies on the Potentiality of Kusum Oil (Schleichera Oleosa) as a Core and Mould Binder for Foundry Applications. Indian Foundry Journal, 49(4) . pp. 25-28.

Agrawal, A and Sahoo, K L and Ghosh, Sukomal and Pandey, B D (2002) Recovering Iron from Copper Slag. Foundry Management & Technology, October . pp. 16-21.

Conference or Workshop Item

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Goswami, M C and Bandyopadhyaya, D and Ghosh, Dinabandhu and Ghosh, Sukomal (2010) Refining of hot metal utilizing fluxed iron oxide pellets. In: NMD-ATM 2010, 14-16 Nov, 2010, IISC, Bangalore.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Goswami, M C and Bandyopadhyaya, D and Ghosh, Dinabandhu and Ghosh, Sukomal (2009) Development of Fluxed Iron Oxide Pellets for Steel Making Utilizing Waste Materials. In: NMD-ATM 2009, November 14-17, 2009, Kolkata.

Ghosh, Sukomal (2008) Production Aspects of Spheroidal Graphite Iron. In: Training Programme on Special Metal Casting and Forming Processes -(CAFP - 2008), Feb. 25-26, 2008, NML, Jamshedpur.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2008) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 15-16, 2008, NML, Jamshedpur.

Mandal, D and Ghosh, M and Pal, J and De, P K and Ghosh Chowdhury, S and Das, S K and Das, Goutam and Ghosh, Sukomal (2006) Influence of Austempering Temperature on Microstructure and Mechanical Properties of Cast Fe-Si-Mn-VSteel. In: 60 Annual Technical Meeting, November, 14-16, 2006, NML, Jamshedpur.

Ghosh, Sukomal (1995) Micro-Structural Characteristics of Cast Irons. In: Experimaental Techniques in Industrial Metallography [ETIM - 95], Nov.27 to Dec. 1, 1995, National Metallurgical Laboratory (CSIR), Jamshedpur.

Ghosh, Sukomal (1994) Ferrous Castings - Mould, Core, Pattern Materials and Processes. In: Workshop for Small Scale Foundries as a part of Skill-Cum-Technology Upgradation Programme, December 26-27, 1994, NML, Jamshedpur.

Ghosh, Sukomal (1994) Heat Treatment of Cast Irons. In: Workshop on Heat Treatment & Surface Engineering of Iron & Steels (HTIS-94), May 11-13, 1994, NML, Jamshedpur.

Project Reports

Poddar, Palash and De, P K and Srivastava, V C and Das, Swapan K and Das, Goutam and Sahoo, K L and Mandal, D and Paul, K K and Ghosh, Sukomal (2006) Development of Rheocasting Facility and Production of Mg - Based Composites. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Mandal, D and Ghosh, M and Pal, J and De, P K and Das, Goutam and Das, Swapan K and Ghosh Chowdhury, S and Lakra, B A and Ghosh, Sukomal (2006) Development of Cast Austempered Fe-Si-Mn-ME (Microalloying Elements) Steels. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

Ghosh, Sukomal and Kumar, A and Das, Swapan K and Das, Goutam and De, P K and Chakravarty, S (2006) Development of cast Al-Fe-V-Si alloys as a wear resistant and elevated temperature material for applications in engineering industries. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)

This list was generated on Fri Mar 29 17:32:22 2024 IST.