Items where Author is "Das, Samar "

Article

Sinha, Arvind and Gupta, A K and Pramanick, A K and Nayar, S and Gunjan, M K and Mishra, T and Bhatt, N C and Vishwanath, N and Das, Samar (2009) Mimicking biomineralization under microgravity. Materials Science and Engineering: C, 29 (3). pp. 779-784.

Ghosh, Arindam and Das, Samar and Chatterjee, S (2008) Ageing behavior of a Cu-bearing ultrahigh strength steel. Materials Science and Engineering A, 486 (1-2). pp. 152-157.

Ghosh Chowdhury, S and Das, Samar and Ravi Kumar, B and De, P K (2006) Twinning-induced sluggish evolution of texture during recrystallization in AISI 316L stainless steel after cold rolling. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials, 37 A (8). pp. 2349-2359.

Ghosh Chowdhury, S and Das, Samar and De, P K (2005) Cold rolling behaviour and textural evolution in AISI 316L austenitic stainless steel. Acta Materialia, 53 (14). pp. 3951-3959.

Ghosh, Arindam and Mishra, B and Das, Samar and Chatterjee, S (2005) Structure and properties of a low carbon Cu bearing high strength steel. Materials Science and Engineering A, 396 (1-2). pp. 320-332.

Palit Sagar, S and Parida, N and Das, Samar and Dobmann, G and Bhattacharya, D K (2005) Magnetic Barkhausen emission to evaluate fatigue damage in a low carbon structural steel. International Journal of Fatigue, 27 (3). pp. 317-322.

Ghosh, Arindam and Chatterjee, S and Mishra, B and Das, Samar (2005) Microstructure, properties, and age hardening behavior of a thermomechanically processed ultralow-carbon cu-bearing high-strength steel. Metallurgical and Materials Transactions A, 36 (3). pp. 703-713.

Ghosh, Arindam and Das, Samar and Chatterjee, S (2005) Ultrahigh strength hot rotted microalloyed steel: microstructure and properties. Materials Science and Technology, 21 (3). pp. 325-333.

Ghosh, M and Das, Samar and Banarjee, P S and Chatterjee, S (2005) Variation in the reaction zone and its effects on the strength of diffusion bonded titanium–stainless steel couple. Materials Science and Engineering A, 390 (1-2). pp. 217-226.

Ghosh, Arindam and Mishra, B and Das, Samar and Chatterjee, S (2004) An ultra low carbon Cu bearing steel: influence of thermomechanical processing and aging heat treatment on structure and properties. Materials Science and Engineering A, 374 (1-2). pp. 43-55.

Sahoo, K L and Das, Samar and Murty, B S (2004) Formation of quasicrystalline related intermetallic compounds in conventionally cast Al-Fe-V-Si alloy. Journal of Non-Crystalline Solids, 334 . pp. 29-32.

Das, Samar and Ghosh, Arindam and Kundu, Sukumar and Chatterjee, S (2004) A study on structure and properties of a hot forged HSLA-80 steel. Transactions of the Indian Institute of Metals, 57 (1). pp. 25-33.

Ravi Kumar, B and Singh, A K and Das, Samar and Bhattacharya, D K (2004) Cold rolling texture in AISI 304 stainless steel. Materials Science and Engineering A, 364 (1-2). pp. 132-139.

Das, Samar and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2003) Microstructural characterization of controlled forged HSLA-80 steel by transmission electron microscopy. Materials Characterization, 50 (4-5). pp. 305-315.

Ghosh, Arindam and Das, Samar and Chatterjee, S and Mishra, B and Ramachandrarao, P (2003) Influence of thermo-mechanical processing and different post-cooling techniques on structure and properties of an ultra low carbon Cu bearing HSLA forging. Materials Science and Engineering A, 348 (1-2). pp. 299-308.

Das, Samar and Ghosh, Arindam and Chatterjee, S and Ramachandrarao, P (2003) The effect of cooling rate on structure and properties of a HSLA forging. Scripta Materialia, 48 (1). pp. 51-57.

Nayar, S and Sinha, Arvind and Das, Samar and Ramachandrarao, P (2001) In situ synthesis of nanosized cadmium sulfide using bovine serum albumin. Journal of Materials Science Letters, 20 (23). pp. 2099-2100.

Vaish, A K and Humane, M M and De, P K and Ranganath, V R and Minj, R K and Das, Goutam and Das, S K and Kumar, R and Das, Samar and Lakra, B A (2001) Development of microalloyed steels and its design aspects Part I : Medium and low carbon microalloyed. Journal of Metallurgy and materials Science., 43 (3). pp. 147-173.

Vaish, A K and Humane, M M and De, P K and Ranganath, V R and Das, Goutam and Das, Swapan K and Kumar, R and Das, Samar (2001) Effect of thermo-mechanical processing on the microstructure and mechanical properties of micro alloyed steels. Journal of Metallurgy and materials Science., 43 (4). pp. 221-238.

Chattoraj, I and Rao, K R M and Das, Samar and Mitra, A (1999) Anodic reactions of amorphous and devitrified Fe-B-Si-Nb-Cu alloys in buffered chloride and fluoride. Corrosion Science , 41 (1). pp. 1-16.

Pathak, L C and Ray, Ashok K and Das, Samar (1999) Carbothermal synthesis of nanocrystalline aluminum nitride powders. Journal of the American Ceramic Society, 82 (1). pp. 257-260.

Mishra, Suman K and Ranganathan, S and Das, Swapan K and Das, Samar (1998) Investigations on precipitation characteristics in a high strength low alloy (HSLA) steel. Scripta Materialia, 39 (2). pp. 235-259.

Kumar, Rakesh and Das, Samar (1998) Physicochemical and structural factors in the sulfuric acid leaching of nickel- and copper-bearing synthetic birnessites. Metallurgical and Materials Transactions B, 29 (3). pp. 527-540.

Das, Samar and Joarder, A (1997) Effect of long-term service exposure at elevated temperature on microstructural changes of 5Cr-0.5Mo steels. Metallurgical and Materials Transactions A, 28 (8). pp. 1607-1616.

Conference or Workshop Item

Das, Samar (1999) Metallographic sample preparation techniques. In: UNSPECIFIED.

Patent

US2003000393398 (2005) Process for the production of zirconium boride powder. US6908599.

US2002000112044 (2004) Process for the preparation of nanosized iron oxide by biomimetic route. US6800271.