Items where Author is "Bose, S C"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 19.

Article

Rao, R G and Ghosh, M and Ganguly, R I and Bose, S C and Sahoo, K L (2020) Mechanical properties and age hardening response of Al6061 alloy based composites reinforced with fly ash. Materials Science and Engineering A, 772 (IF-4.081). p. 138823.

Ray, Ashok K and Kumar, S and Guguloth, K and Gunjan, M K and Goswami, B and Bose, S C (2011) Microstructural studies and remnant life assessment of eleven years service exposed reformer tube. Materials Science and Engineering A, 529 (1). pp. 102-112.

Ray, Ashok K and Tiwari, Y N and Guguloth, K and Das, Goutam and Gunjan, M K and Bose, S C and Ghosh, R N (2011) Health assessment of 22 years service-exposed radiant tube from an oil refinery. Engineering Failure Analysis, 18 (3). pp. 1067-1075.

Ray, Ashok K and Bose, S C and De, P K and Das, D K (2010) Lifetime evaluation of a thick thermal barrier coated superalloy used in turbine blade. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 527 (21-22). pp. 5474-5483.

Roy, Nilima and Bose, S C and Ghosh, R N (2010) Stochastic aspects of evolution of creep damage in austenitic stainless steel. Materials Science and Engineering: A, 527 (18-19). pp. 4810-4817.

Ray, Ashok K and Bose, S C and De, P K and Mandal, D and Alam, H Z and Sharma, VSRA and Das, D K (2010) Evaluation of the Lifetime and Effect of Furnace Thermal Cycling on Stress Rupture Behaviour of a Thermal Barrier Coated Superalloy Used in a Turbine Blade. Canadian Metallurgical Quarterly, 49 (2). pp. 191-214.

Roy, Nilima and Ghosh, R N and Bose, S C (2010) A stochastic model for evolution of creep damage in engineering materials. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 665-669.

Ray, Ashok K and Roy, Nilima and Kar, Abhijit and Ray, Ajoy K and Bose, S C and Das, Goutam and Sahu, J K and Das, D K and Venkataraman, B and Joshi, Srikanth V (2009) Mechanical property and characterization of a NiCoCrAlY type metallic bond coat used in turbine blade. Materials Science and Engineering: A, 505 (1-2). pp. 96-104.

Ray, Ashok K and Guguloth, K and Swaminathan, J and Bose, S C and Roy, Nilima and Tiwari, Y N and Roy, P K and Alam, Z and Sharma, VSRA and Joshi, Srikanth V and Venkataraman, B and Das, D K (2009) Damage Resistance of a Thermal Barrier Coated Superalloy Used in Aero Turbine Blade under Accelerated Creep Condition. High Temperature Materials And Processes, 28 (1-2). pp. 35-53.

Ray, Ashok K and Goswami, B and Kar, Abhijit and Ray, Ajoy K and Das, H K and Roy, P K and Kumar, S B and Bose, S C (2008) Damage resistance of a thermal barrier coated superalloy for combustor liners in aero turbines during fatigue and creep. Canadian Metallurgical Quarterly, 47 (4). pp. 479-493.

Bose, S C and Singh, Kulvir and Ray, Ashok K and Ghosh, R N (2008) Effect of thermal ageing on mechanical properties and microstructures of a standard G-X 12 CrMoVWNbN 1011 grade of cast steel for turbine casing. Materials Science and Engineering A, 476 (1-2). pp. 257-266.

Ray, Ashok K and Tiwari, Y N and Roy, P K and Chaudhuri, S and Bose, S C and Ghosh, R N and Whittenberger, J D (2007) Creep rupture analysis and remaining life assessment of 2.25Cr–1Mo steel tubes from a thermal power plant. Materials Science and Engineering A, 454-455 . pp. 679-684.

Das, Goutam and Ghosh, Sabita and Bose, S C and Ghosh, Sukomal (2006) Use of ball indentation technique to evaluate room temperature mechanical properties of a gas turbine blade. Materials Science and Engineering A, 424 (1-2). pp. 326-332.

Ray, Ashok K and Singh, S R and Swaminathan, J and Roy, P K and Tiwari, Y N and Bose, S C and Ghosh, R N (2006) Structure property correlation study of a service exposed first stage turbine blade in a power plant. Materials Science and Engineering A, 419 (1-2). pp. 225-232.

Bose, S C and Singh, K and Swaminathan, J and Sarma, D S (2004) Prediction of creep life of X10CrMoVNbN-91 (P-91) steel through short term stress relaxation test methodology. Materials Science and Technology, 20 (10). pp. 1290-1296.

Bose, S C and Singh, Kulvir and Jayaraman, G and Venugopal, K (2000) Evaluation and establishment of short-term stress relaxation test methodology for predicting long-term creep life of steam turbine components. Journal of Metallurgy and materials Science, 42 (3). pp. 177-197.

Conference or Workshop Item

Bose, S C and Roy, Nilima and Ghosh, R N (2009) Probabilistic creep life assessment of austenitic stainless steel. In: NMD - ATM 2009, November 14, 2009 to November 17, 2009, Science City Complex,Kolkata, India.

Bose, S C and Singh, K and Sarma, D S (2008) Effect of service simulated ageing on microstructure and creep rupture properties of I CrMoV (Casing Casting) steel vis-a-vis remnant life assessment in view of latent creep strength. In: UNSPECIFIED.

Project Reports

Roy, Nilima and Ghosh, R N and Bose, S C and Swaminathan, J (2007) A Stochastic Model for Assessment of Creep damage. Exploratory (OLP). CSIR-NML, Jamshdpur. (Submitted)

This list was generated on Fri Jul 3 01:00:32 2020 IST.