Items where Author is "Bar, H N"

Article

Nath, Prekshya and Bar, H N and Bhattacharjee, Amit and Sen, I (2024) Designing of novel microstructure and its impact on the improved service temperature mechanical performance of 2nd and 3rd generation advanced intermetallic TiAl alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and processing, 893.

Choudhary, C and Bar, H N and Arif, S K MD and Sahoo, K L and Mandal, D (2024) Effect of Structural Refinement and Modification on the Mechanical Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance, 33. pp. 5155-5167.

Metya, Avijit Kumar and Pramanick, A K and Bar, H N and Gupta, Suneel K and Sagar, Sarmishtha Palit (2023) Detection of fatigue crack initiation pre-cursor in meta-stable SS 304LN using Rayleigh surface wave harmonic generation. Materials Characterization, 201.

Choudhary, C and Bar, H N and Arif, S M D and Sahoo, K L and Mandal, D (2023) Effect of Structural Refinement and Modification on the Mechanical Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance.

Chakrabarty, A and Sahu, R and Kumar, A and Bar, H N and Hitzler, L and Khutia, N (2023) Finite element evaluation of fracture toughness and crack propagation in LB-PBF AlSi10Mg. Continuum Mechanics and Thermodynamics, 35(2). pp. 677-697.

Chakrabarty, A and Chakrabarty, P and Jain, R and Sahu, V K and Gurao, N P and Bar, H N and Khutia, N (2023) Influence of Scanning and Building Strategies on the Deformation Behavior of Additively Manufactured AlSi10Mg: CPFEM and Finite Element Studies. Metals and Materials International.

Choudhary, C and Bar, H N and Pramanick, A K and Sahoo, K L and Mandal, D (2022) Effect of Strain Induced Melt Activation Process on the Microstructure and Mechanical Properties of Al-5Ti-1B Treated Al-7Si Alloy. Metals and Materials International.

Kumar, G and Bar, H N and Kumar, A (2022) Influence of Dynamic Strain Aging on Ratcheting Deformation Behavior of SA333 Gr-6 Steel. Journal of Materials Engineering and Performance.

Kumar, G and Kumar, A and Bar, H N (2021) Effect of dynamic strain aging on cyclic deformation in piping material SA333 Gr-6 steel. International Journal of Pressure Vessels and Piping, 194 Part A.

Chakrabarty, A and Sahu, V K and Das, Anindya and Mukherjee, Shreya and Gurao, N P and Chakraborty, P and Bar, H N and Khutia, N (2021) Study of the Effect of Two Separate Tilt Angles of Laser Scanning Lines on the Microstructure and Mechanical Properties in Direct Metal Laser Sintered AlSi10Mg Alloy. Metals and Materials International.

Kaushik, V and Bar, H N and Ghosh, A (2021) Influence of extremely cold environmental conditions on interfacial fracture phenomenon of aerospace grade unidirectional composites. Thin-Walled Structures, 161.

Firoz, R and Basantia, S K and Khutia, N and Bar, H N and Sivaprasad, S and Murthy, G V S (2020) Effect of microstructural constituents on mechanical properties and fracture toughness of Inconel 718 with anomalous deformation behavior at 650 degrees C. Journal of Alloys and Compounds, 845 (IF-4.650). p. 156276.

Kumar, G and Kumar, Ashok and Bar, H N and Sivaprasad, S (2019) A comparative assessment of cyclic deformation behavior of SA333 Gr-6 steel at ambient and elevated temperatures. International Journals of Material Research, 110(11). pp. 1000-1009.

Paul, S K and Roy, S and Sivaprasad, S and Bar, H N and Tarafder, S (2018) Identification of Post-necking Tensile Stress–Strain Behavior of Steel Sheet: An Experimental Investigation Using Digital Image Correlation Technique. Journal of Materials Engineering and Performance, 27(11) (IF-1.094). pp. 5736-5743.

Chakrabarty, A K and Khutia, N and Bar, H N and Dey, P P and Sivaprasad, S (2017) Effect of Loading Variations on Damage of SA333 C-Mn Steel. Materials Today: Proceedings, 4(2) P. pp. 415-423.

Prakash, Amit and Bar, H N and Sivaprasad, S and Tarafder, S and Dwivedi, J P (2017) The Effect of Residual Stress on Fatigue crack growth rate in AISI 304LN Stainless Steel. Materials Today: Proceedings, 4(2). pp. 677-686.

Paul, Surajit Kumar and Roy, Satish and Sivaprasad, S and Bar, H N and Tarafder, S (2017) Local Ratcheting Response in Dissimilar Metal Weld Joint: Characterization Through Digital Image Correlation Technique. Journal of Materials Engineering and Performance, 26(10) (IF-1.331). pp. 4953-4963.

Metya, Avijit Kumar and Bar, H N and Tarafder, Soumitra and Balasubramaniam, Krishnan (2017) Nonlinear Lamb wave for the assessment of ratcheting behavior in IF steel. Journal of Non Destructive Testing & Evaluation, 15/10.

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2016) Comparative assessment of cyclic J-R curve determination by different methods in a pressure vessel steel. Journal of Nuclear Materials, 472 (IF-2.048). pp. 55-64.

Das, A R and Chowdhury, T and Sivaprasad, S and Bar, H N and Narasaiah, N and Tarafder, S (2016) Influence of dynamic strain ageing on fracture behaviour and stretch zone formation of a reactor pressure vessel steel. International Journal of Fracture, 202(1) (IF-2.247). pp. 79-91.

Dutta, A K and Sivaprasad, S and Bar, H N and Prasad, P and Kumar, K (2016) Numerical modelling of dissipation energy of high tensile steel frames against cyclic earthquake excitations. Journal of Metallurgy and Materials Science, 58(3) (IF-0.0). pp. 133-146.

Datta, A K and Sivaprasad, S and Bar, H N and Halder, N and Prasad, P (2015) Estimation of available in-elastic dissipation energy of high tensile steels against earthquake excitations. Journal of Metallurgy and Materials Science, 57(4). pp. 197-209.

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2015) Incremental cyclic fracture behaviour of 20MnMoNi55 steel at room temperature. International Journal of Fracture, 192(1) (IF-1.348). pp. 117-132.

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2015) Cyclic fracture behaviour of 20MnMoNi55 steel at room and elevated temperatures. Fatigue & Fracture of Engineering Materials & Structures, 38 (IF-1.561). pp. 813-827.

Seth, P P and Das, Arpan and Bar, H N and Sivaprasad, S and Basu, A and Dutta, K (2015) Evolution of Dislocation Density During Tensile Deformation of BH220 Steel at Different Pre-strain Conditions. Journal of Materials Engineering and Performance, 24(7) (IF-0.998). pp. 2779-2783.

Sivaprasad, S and Bar, H N and Gupta, Suneel K and Arora, Punit and Bhasin, V and Tarafder, S (2014) A comparative assessment of cyclic deformation behaviour in SA333 Gr.6 steel using solid, hollow specimens under axial and shear strain paths. International Journal of Fatigue, 61 (IF- 1.916). pp. 76-86.

Barat, K and Bar, H N and Mandal, D and Roy, H and Sivaprasad, S and Tarafder, S (2014) Low temperature tensile deformation and acoustic emission signal characteristics of AISI 304LN stainless steel. Materials Science and Engineering A, 597 (IF-2.409). pp. 37-47.

Bar, H N and Sivaprasad, S and Narasaiah, N and Paul, S K and Sen, B N and Chandra, Sanjay (2013) Low Cycle and Ratchetting Fatigue Behavior of High UTS/YS Ratio Reinforcing Steel Bars. Journal of Materials Engineering and Performance, 22(6) (IF- 0.92). pp. 1701-1707.

Panda, A K and Metya, Avijit Kumar and Bar, H N and Roy, Rajat K and Murthy, G V S and Palit Sagar, S and Mitra, A (2012) Non-destructive evaluation for structural health assessment. Science and Culture.

Roy, H and Bar, H N and Sivaprasad, S and Tarafder, S and Ray, K K (2010) Acoustic emission during monotonic and cyclic fracture toughness tests of 304LN weldments. International Journal of Pressure Vessels and Piping, 87 (10). pp. 543-549.

Bar, H N and Dayal, V and Barnard, D and Hsu, D K (2010) Plate Wave Resonance with Air-Coupled Ultrasonics. Review of Progress in Quantitative Nondestructive Evaluation, 29A 29B (1211). pp. 1069-1076.

Project Reports

Bagui, S and Narasaiah, N and Bar, H N and Das, Swapan K and Parida, N and Upadhyay, A K and Sharma, R K (2011) Evaluation of Center Buffer Coupler. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Metya, Avijit Kumar and Bar, H N and Parida, N and Das, S K (2011) Failure Analysis of Ball Clevis of 320KN Hardware Fittings. Sponsored (SSP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Bar, H N and Sahu, J K and Parida, N and Gunjan, M K (2011) Failure Investigation of Components of Aero Engine No. HDR-80376U. Other (TMP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Bar, H N and Parida, N and Palit Sagar, S and Ghosh, R N (2007) Evaluation of Prototype Horton Sphere using Acoustic Emission. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)

Conference or Workshop Item

Arif, S M and Ghorai, S and Bar, H N and Mandal, D (2022) Effect of quenching and partitioning time on microstructure and mechanical properties of low carbon micro-alloyed steel. In: Symposium on Failure and Preventive Maintenance of Machineries (FPMM), March 08-09, 2022, Durgapur, India.

Metya, Avijit Kumar and Murthy, G V S and Bar, H N and Parida, N (2009) Microstructural Characterization of Precipitation Process in a Nickel-Alloy by Non-linear Ultrasonic. In: Proceedings of the National Seminar & Exhibition on Non-Destructive Evaluation, December 10-12, 2009, Trichy.