Items where Author is "Bar, H N"

Nath, Prekshya and Bar, H N and Bhattacharjee, Amit and Sen, I (2024) Designing of novel microstructure and its impact on the improved service temperature mechanical performance of 2nd and 3rd generation advanced intermetallic TiAl alloys. Materials Science and Engineering A-Structural Materials Properties Microstructure and processing, 893 .

Metya, Avijit Kumar and Pramanick, A K and Bar, H N and Gupta, Suneel K and Sagar, Sarmishtha Palit (2023) Detection of fatigue crack initiation pre-cursor in meta-stable SS 304LN using Rayleigh surface wave harmonic generation. Materials Characterization, 201 .

Choudhary, C and Bar, H N and Arif, S M D and Sahoo, K L and Mandal, D (2023) Effect of Structural Refinement and Modification on the Mechanical Properties of Al-7Si Alloy. Journal of Materials Engineering and Performance .

Chakrabarty, A and Sahu, R and Kumar, A and Bar, H N and Hitzler, L and Khutia, N (2023) Finite element evaluation of fracture toughness and crack propagation in LB-PBF AlSi10Mg. Continuum Mechanics and Thermodynamics, 35(2) . pp. 677-697.

Chakrabarty, A and Chakrabarty, P and Jain, R and Sahu, V K and Gurao, N P and Bar, H N and Khutia, N (2023) Influence of Scanning and Building Strategies on the Deformation Behavior of Additively Manufactured AlSi10Mg: CPFEM and Finite Element Studies. Metals and Materials International .

Arif, S M and Ghorai, S and Bar, H N and Mandal, D (2022) Effect of quenching and partitioning time on microstructure and mechanical properties of low carbon micro-alloyed steel. In: Symposium on Failure and Preventive Maintenance of Machineries (FPMM), March 08-09, 2022, Durgapur, India.

Choudhary, C and Bar, H N and Pramanick, A K and Sahoo, K L and Mandal, D (2022) Effect of Strain Induced Melt Activation Process on the Microstructure and Mechanical Properties of Al-5Ti-1B Treated Al-7Si Alloy. Metals and Materials International .

Kumar, G and Bar, H N and Kumar, A (2022) Influence of Dynamic Strain Aging on Ratcheting Deformation Behavior of SA333 Gr-6 Steel. Journal of Materials Engineering and Performance .

Kumar, G and Kumar, A and Bar, H N (2021) Effect of dynamic strain aging on cyclic deformation in piping material SA333 Gr-6 steel. International Journal of Pressure Vessels and Piping, 194 Part A .

Chakrabarty, A and Sahu, V K and Das, Anindya and Mukherjee, Shreya and Gurao, N P and Chakraborty, P and Bar, H N and Khutia, N (2021) Study of the Effect of Two Separate Tilt Angles of Laser Scanning Lines on the Microstructure and Mechanical Properties in Direct Metal Laser Sintered AlSi10Mg Alloy. Metals and Materials International .

Kaushik, V and Bar, H N and Ghosh, A (2021) Influence of extremely cold environmental conditions on interfacial fracture phenomenon of aerospace grade unidirectional composites. Thin-Walled Structures, 161 .

Firoz, R and Basantia, S K and Khutia, N and Bar, H N and Sivaprasad, S and Murthy, G V S (2020) Effect of microstructural constituents on mechanical properties and fracture toughness of Inconel 718 with anomalous deformation behavior at 650 degrees C. Journal of Alloys and Compounds, 845 (IF-4.650). p. 156276.

Kumar, G and Kumar, Ashok and Bar, H N and Sivaprasad, S (2019) A comparative assessment of cyclic deformation behavior of SA333 Gr-6 steel at ambient and elevated temperatures. International Journals of Material Research, 110(11) . pp. 1000-1009.

Paul, S K and Roy, S and Sivaprasad, S and Bar, H N and Tarafder, S (2018) Identification of Post-necking Tensile Stress–Strain Behavior of Steel Sheet: An Experimental Investigation Using Digital Image Correlation Technique. Journal of Materials Engineering and Performance, 27(11) (IF-1.094). pp. 5736-5743.

Chakrabarty, A K and Khutia, N and Bar, H N and Dey, P P and Sivaprasad, S (2017) Effect of Loading Variations on Damage of SA333 C-Mn Steel. Materials Today: Proceedings, 4(2) Part A . pp. 415-423.

Prakash, Amit and Bar, H N and Sivaprasad, S and Tarafder, S and Dwivedi, J P (2017) The Effect of Residual Stress on Fatigue crack growth rate in AISI 304LN Stainless Steel. Materials Today: Proceedings, 4(2) . pp. 677-686.

Paul, Surajit Kumar and Roy, Satish and Sivaprasad, S and Bar, H N and Tarafder, S (2017) Local Ratcheting Response in Dissimilar Metal Weld Joint: Characterization Through Digital Image Correlation Technique. Journal of Materials Engineering and Performance, 26(10) (IF-1.331). pp. 4953-4963.

Metya, Avijit Kumar and Bar, H N and Tarafder, Soumitra and Balasubramaniam, Krishnan (2017) Nonlinear Lamb wave for the assessment of ratcheting behavior in IF steel. Journal of Non Destructive Testing & Evaluation, 15/10 .

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2016) Comparative assessment of cyclic J-R curve determination by different methods in a pressure vessel steel. Journal of Nuclear Materials, 472 (IF-2.048). pp. 55-64.

Das, A R and Chowdhury, T and Sivaprasad, S and Bar, H N and Narasaiah, N and Tarafder, S (2016) Influence of dynamic strain ageing on fracture behaviour and stretch zone formation of a reactor pressure vessel steel. International Journal of Fracture, 202(1) (IF-2.247). pp. 79-91.

Dutta, A K and Sivaprasad, S and Bar, H N and Prasad, P and Kumar, K (2016) Numerical modelling of dissipation energy of high tensile steel frames against cyclic earthquake excitations. Journal of Metallurgy and Materials Science, 58(3) (IF-0.04). pp. 133-146.

Datta, A K and Sivaprasad, S and Bar, H N and Halder, N and Prasad, P (2015) Estimation of available in-elastic dissipation energy of high tensile steels against earthquake excitations. Journal of Metallurgy and Materials Science, 57(4) . pp. 197-209.

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2015) Incremental cyclic fracture behaviour of 20MnMoNi55 steel at room temperature. International Journal of Fracture, 192(1) (IF-1.348). pp. 117-132.

Chowdhury, T and Sivaprasad, S and Bar, H N and Tarafder, S and Bandyopadhyay, N R (2015) Cyclic fracture behaviour of 20MnMoNi55 steel at room and elevated temperatures. Fatigue & Fracture of Engineering Materials & Structures, 38 (IF-1.561). pp. 813-827.

Seth, P P and Das, Arpan and Bar, H N and Sivaprasad, S and Basu, A and Dutta, K (2015) Evolution of Dislocation Density During Tensile Deformation of BH220 Steel at Different Pre-strain Conditions. Journal of Materials Engineering and Performance, 24(7) (IF-0.998). pp. 2779-2783.

Sivaprasad, S and Bar, H N and Gupta, Suneel K and Arora, Punit and Bhasin, V and Tarafder, S (2014) A comparative assessment of cyclic deformation behaviour in SA333 Gr.6 steel using solid, hollow specimens under axial and shear strain paths. International Journal of Fatigue, 61 (IF- 1.916). pp. 76-86.

Barat, K and Bar, H N and Mandal, D and Roy, H and Sivaprasad, S and Tarafder, S (2014) Low temperature tensile deformation and acoustic emission signal characteristics of AISI 304LN stainless steel. Materials Science and Engineering A, 597 (IF-2.409). pp. 37-47.

Bar, H N and Sivaprasad, S and Narasaiah, N and Paul, S K and Sen, B N and Chandra, Sanjay (2013) Low Cycle and Ratchetting Fatigue Behavior of High UTS/YS Ratio Reinforcing Steel Bars. Journal of Materials Engineering and Performance, 22(6) (IF- 0.92). pp. 1701-1707.

Panda, A K and Metya, Avijit Kumar and Bar, H N and Roy, Rajat K and Murthy, G V S and Palit Sagar, S and Mitra, A (2012) Non-destructive evaluation for structural health assessment. Science and Culture .

Bagui, S and Narasaiah, N and Bar, H N and Das, Swapan K and Parida, N and Upadhyay, A K and Sharma, R K (2011) Evaluation of Center Buffer Coupler. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Metya, Avijit Kumar and Bar, H N and Parida, N and Das, S K (2011) Failure Analysis of Ball Clevis of 320KN Hardware Fittings. Sponsored (SSP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Bar, H N and Sahu, J K and Parida, N and Gunjan, M K (2011) Failure Investigation of Components of Aero Engine No. HDR-80376U. Other (TMP). CSIR -NML Jamshedpur, Jamshedpur. (Submitted)

Roy, H and Bar, H N and Sivaprasad, S and Tarafder, S and Ray, K K (2010) Acoustic emission during monotonic and cyclic fracture toughness tests of 304LN weldments. International Journal of Pressure Vessels and Piping, 87 (10). pp. 543-549.

Bar, H N and Dayal, V and Barnard, D and Hsu, D K (2010) Plate Wave Resonance with Air-Coupled Ultrasonics. Review of Progress in Quantitative Nondestructive Evaluation, 29A 29B (1211). pp. 1069-1076.

Metya, Avijit Kumar and Murthy, G V S and Bar, H N and Parida, N (2009) Microstructural Characterization of Precipitation Process in a Nickel-Alloy by Non-linear Ultrasonic. In: Proceedings of the National Seminar & Exhibition on Non-Destructive Evaluation, December 10-12, 2009, Trichy.

Bar, H N and Parida, N and Palit Sagar, S and Ghosh, R N (2007) Evaluation of Prototype Horton Sphere using Acoustic Emission. Exploratory (OLP). CSIR-NML, Jamshedpur. (Submitted)