Items where Subject is "Metallurgy > Extractive Metallurgy > Pyrometallurgy"
Group by: Creators | Item Type Number of items at this level: 73.
AAbhilash, (2008) Compedium of Lectures for Training Programme on Mineral Processing and Extractive Metallurgy. In: Compedium of Lectures for Training Programme on Mineral Processing and Extractive Metallurgy. CSIR-NML, Jamshedpur. Adekunle , Adeleke and Jamiu , Odusote and Peter , Ikubanni and Olumuyiwa , Lasode and Madhurai , Malathi and Paswan, Dayanand (2021) Physical and mechanical characteristics of composite briquette from coal and pretreated wood fines. Int J Coal Sci Technol . Adeleke, A A and Odusote, J K and Lasode, O A and Ikubanni, P P and Malathi, M and Paswan, Dayanand (2019) Evaluation of Thermal Decomposition Characteristics and Kinetic Parameters of Melina Wood. Biofuels (IF-1.130). pp. 1-7. Agarwal, Sanjay and Dubey, Vishal kumar and Park, K H and Lee, Jin-Young (2021) Distribution of Rare Earth Elements in Coal and Coal Fly Ash. In: Clean Coal Technologies Beneficiation, Utilization, Transport Phenomena and Prospective. Springer Nature , Switzerland AG , pp. 557-574. ISBN 978-3-030-68501-0 Agarwal, Sanjay and Kim, Hong-In and Park, K H and Lee, Jin-Young (2020) Thermodynamic Aspects for Rare Earth Metal Production. In: Rare-Earth Metal Recovery for Green Technologies, Methods and Applications. Springer, Switzerland, pp. 39-56. ISBN ISBN 978-3-030-38106-6 (eBook) Agarwal, Sanjay and Kim, Hong-In and Park, Kyung-Ho and Lee, Jin-Young (2017) Monazite Mineral Processing. In: Mineral Processing Methods, Applications and Technology, Geology and Mineralogy Research Development. Nova Science Publishers, Inc. New York, USA, NEW YORK, USA, pp. 39-56. ISBN 978-1-53612-893-2 (eBook) Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Agglomeration of chromite ore fines through direct sintering route. In: International Conference on “Processing of Lean Grade and Urban Ores (IC-LGO 2015), 20-22nd January 2015, Jamshedpur . Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Sintering of chromite ore fines for its utilization in arc furnace for ferrochrome production. In: 13th Iron and Steel summit, 25-26th September, 2015, Raipur, India. Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2015) Smelting characteristics of fluxed chromite sinter and its performance assessment in electric arc furnace to produce high carbon ferrochrome. Ironmaking & Steelmaking . Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2018) Study on production of low carbon ferrochrome from chromite concentrate. In: Manganese/Chrome Ores & Ferro-Alloy Summit, 15-16th February 2018, Visakhapatnam, India . Agarwal, Sanjay and Pal, J and Ghosh, Dinabandhu (2016) Utilization of low grade chromite ore fines to recover chromium as charge-chrome. In: 20th National conference on Non-ferrous minerals and metals-2016, 8-9th July, 2016, Jamshedpur . Agarwal, Sanjay and Sahu, K K and Jana, R K and Mehrotra, S P (2009) Recovery of Cu, Ni, Co and Mn from sea nodules by direct reduction smelting. In: Proceedings of the Eighth (2009) ISOPE Ocean Mining Symposium , 20-24 September 2009, Chennai, India. Agarwal, Sanjay and Sahu, K K and Jana, R K and Mehrotra, S P (2009) Studies on recovery of Ni, Co & Cu from polymetallic sea nodules by direct reduction smelting. In: Pyrometallurgy of Nickel and Cobalt 2009, 23- 26 AUGUST 2009, SUDBURY, ONTARIO, Canada. Ammasi, A (2021) Development of synthetic slag for desulphurisation of the steel during steelmaking in induction furnace. Advances in Materials and Processing Technologies, online . Ammasi, A and Pal, J (2021) Blast Furnace Flue Dust as a Potential Carbon Additive in Hematite Ore Pellet. Mineral Processing and Extractive Metallaurgy Review, Online published (IF-2.76). Ammasi, A and Pal, J (2014) Effect of an organic binder and copper slag on pelletization of hematite ore eliminating bentonite. Masters thesis, AcSIR, CSIR-NML , . Ammasi, A and Pal, J (2016) Replacement of bentonite in hematite ore pelletisation using a combination of sodium lignosulphonate and copper smelting slag. Ironmaking and Steelmaking, 43(3) (IF-0.985). pp. 203-213. Ammasi, A and Pal, J and Pal, Jagannath and Ammasi, Ayyandurai (2024) Use of Additives as Internal Heat Sources in Hematite Ore Pellets- A Review. Mineral Processing and Extractive Metallurgy Review, online (4.5). Ammasi , A and Ashok, K and Thatoi, S and Singh, D.P (2020) Flux Development for Dephosphorization of Steel in Induction Furnace. In: International Conference on Steelmaking and Casting - Sustainable Technology and Practices (SMCSTP2020) , 6 - 7 February 2020, Jamshedpur, India. Ammasi , A and Pal, J (2018) Effect of Cooling Rate on Cold Compressive Strength of Carbon-Burdened Hematite Pellets. In: MINERAL PROCESSING Technology -2018, 10-12 Oct,2018, Dhanbad. Ammasi , A and Pal, J (2018) Influence of addition of carbon on Pelletization of Hematite Ore Fines. In: Asia Steel International Conference 2018, 6-9 Feb., 2018, Mayfair Hotel, Bhubaneswar, India. CCSIR-NML, Director Manufacture of sponge iron. Other (TMP). CSIR, NML. (Submitted) DDeo, Brahma and Gupta, P and Malathi, M and Pieter, Koopmans and Overbosch, Aart and Boom, Rob (2006) Theoretical and Practical Aspects of Dissolution of Lime in Laboratory Experiments and in BOF. In: 5th European Oxygen Steelmaking Conference, 26-28, June, 2006, Aachen, Germany. EElzohiery, Mohamed and Mohassab, Yousef and Pal, J and Zhang, Shengqin and Sohn, Hong Yong (2016) Reduction kinetics of magnetite concentrate particles with H2 + CO at 1200 to 1600 oC relevant to a novel Ironmaking process. 7th International Symposium on High-Temperature Metallurgical Processing . pp. 35-41. GGupta, R D and Gupta, P K and Nijhawan, B R (1965) Some Laboratory–Scale trials on Electro-slag melting. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. JJana, R K and Randhawa, N S (2009) Production of Silicomanganese Alloy from Low Manganese Containing Leached Sea Nodules Residue. In: The Eighth (2009) ISOPE Ocean Mining Symposium, September 20-24, 2009, Chennai, India. Jana, R K and Randhawa, N S and Agarwal, Sanjay (2008) Making standard grade FeSiMn alloy by blending of different low grade materials. In: National Metallurgist Day - Annual Technical Meeting (NMD-ATM), 12-15 November 2008, New Delhi. Jana, R K and Randhawa, N S and Agarwal, Sanjay and Maity, S K and Ghorai, S (2008) Two stage smelting process for recovery of manganese from low manganese bearing material. In: 12th Int. Sem. Nonferrous Metals – 2008, 4-5 July, 2008, Nagpur. Jana, R K and Randhawa, N S and Pal, J and Minj, R K and Godiwalla, K M (2005) Recovery of manganese as ferro-silico-manganese alloy from leached sea nodule residue. In: National Seminar on Polymetallic Nodule, 29-30th September 2005, Bhubaneswar. KKanari, N and Mishra, D and Fillipov, L and Diot, F and Mochon, J and Allain, E (2010) Kinetics of hematite chlorination with Cl(2) and Cl(2) + O(2). Part II. Chlorination with Cl(2) + O(2). Thermochimica Acta, 506 (1-2). pp. 34-40. Kanari, N and Mishra, D and Fillipov, L and Diot, F and Mochon, J and Allain, E (2010) Kinetics of hematite chlorination with Cl(2) and Cl(2) + O(2): Part I. Chlorination with Cl(2). Thermochimica Acta, 497 (1-2). pp. 52-59. Kanari, N and Mishra, D and Gaballah, I and Dupre, B (2002) Kinetics aspects of zinc basic carbonate decomposition. In: EPD Congress -2002 (Annual Meeting of the Minerals-Metals-and-Materials-Society ), Feb. 17-21, 2002, Seatle. Kumar, Rakesh and Srivastava, J P and Premchand, (1998) Utilization of iron values of red mud for metallurgical applications. In: Environmental and Waste Management (ISSN : 0971-9407). National Metallurgical Laboratory, Jamshedpur, India, Jamshedpur, India, pp. 108-119. MMahanty, M S and Misra, R N and Bhatnagar, P P (1967) Studies on the Extraction of Nickel from a low grade Nickeliferous Serpentine ore from Rajasthan. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Malathi, M and Deo, Brahma and Prasad, N and Sukla, A K and Boom, Rob (2007) Theoretical and Practical Aspects of Lance Skulling and Slag Foaming in BOF Vessels. In: AISTech Conference Proceedings, May 7-10, 2007, Indiana Convention Center, Indianapolis, Ind., USA. Malathi, M and Godiwalla, K M and Kumar, A and Chacko, E Z and Ajmani, S K and Ranganathan, S (2014) Generation of magnesium for in-situ desulphurisation–investigations on influence of inert gas flowrate. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 123/2 (IF-0.690). pp. 67-74. Malathi, M and Kumar, Anil and Chacko, Z.E and Godiwalla, K.M and Ajmani, S K and Ranganathan, S (2013) Desulfurization of Hot Metal Through In Situ Generation of Magnesium in 30-kg Molten Iron Bath-Influence of Inert Gas Flow Rate. Steel Research International, 85 (IF-1.15). pp. 927-934. Malathi, M and Roy, T K and Shainu, S and Ajmani, S K and Paswan, Dayanand and Prakash, S and Mahashabde, V V (2014) Prediction of Longitudinal Facial Crack and Optimization of Process Parameters during Continuous Casting of Slabs Using Artificial Neural Network Models. Tata search, 2 . pp. 227-235. Manocha, Rajindra and Bhatnagar, P P and Banerjee, T (1954) Preparation of Titanium by Kroll’s Process. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. Md., Meraj and Pramanik, Susanta and Pal, J (2014) Effect of MgO bearing flux material of different sources in iron ore pellets. Masters thesis, CSIR-NML and NIT-Durgapur. Meraj, Md and Pramanik, Susanta and Pal, J (2016) Role of MgO and Its Different Minerals on Properties of Iron Ore Pellet. Transaction of the Indian Institute of Metals, 69(6) (IF- 0.533). pp. 1141-1153. Meshram, Pratima and Pandey, B D and Abhilash, (2019) Perspective of availability and sustainable recycling prospects of metals in rechargeable batteries – A resource overview. Resources Policy, 60 . pp. 9-22. Meshram, Pratima and Pandey, B D and Mankhand, T R (2014) Extraction of lithium from primary and secondary sources by pre-treatment, leaching and separation: A comprehensive review. Hydrometallurgy, 150 (IF-2.224). pp. 192-208. OOdusote, Jamiu and Adekunle, Adeleke and Olumuyiwa, Lasode and Malathi, M and Paswan, Dayanand (2019) Optimization of Torrefaction Parameters for High Energetic Yields. In: 11th International Symposium on Green and Sustainable Technologies for Materials Manufacturing and Processing, September 29-October 3, 2019, Portland, Ore. PPal, J (2019) Innovative Development on Agglomeration of Iron Ore Fines and Iron Oxide Wastes. Mineral Processing and Extractive Metallurgy Review, 40(4) (IF-1.615). pp. 248-264. Pal, J (2016) Utilization of micro fines in iron and steel making process. Steel World, June . pp. 86-90. Pal, J and Chelladurai, Arunkumar and Yamuzala, Rajshekhar and Das, Goutam and Goswami, M C and Venugopalan, T (2014) Development on Iron Ore Pelletization Using Calcined Lime and MgO Combined Flux Replacing Limestone and Bentonite. ISIJ International, 54 (IF-1.69). pp. 2169-2178. Pal, J and Ghorai, S and Goswami, M C and Prakash, S and Venugopalan, T (2014) Development of Pellet-Sinter Composite Agglomerate for Blast Furnace. ISIJ International, vol 54 (IF-1.069). pp. 620-627. Pal, J and Ghorai, S and Venugopalan, T (2020) Effect of high Blaine iron ore fines in hematite ore pelletization for blast furnace. Mineral Processing and Extractive Metallurgy (Trans. IMM C), 129 (3–4) (IF-0.89). pp. 299-307. Pal, J and Ghorai , S and Rajshekhar, Y and Koranne, V. M (2017) Development of blast furnace quality pellet optimising blue dust, hard ore and friable ore ratio. Ironmaking and Steelmaking , 44(8) (IF-0.985). pp. 568-576. Pal, J and Venugopalan, T (2015) Carbon as in situ energy source in induration of hematite pellets and its effect on pellet properties. Ironmaking and Steelmaking, 42 (IF-0.553). pp. 139-147. Pal, Jagannath and D, Prasad and T, Venugopalan (2021) Modified coke breeze distribution in Iron ore sintering - A Novel technique of reducing energy consumption and improving quality. Journal of Mining and Metallurgy, Section B: Metallurgy, 57(1) (IF-1.6). pp. 73-82. Pal, Jagannath and Ghorai, S and Venugopalan, T (2018) Effect of high Blaine iron ore fines in hematite ore pelletization for blast furnace. Mineral Processing and Extractive Metallurgy . (In Press) PAL, Jagannath and GHORAI, Satadal and BANDYOPADHYAY, Debajyoti and GHOSH, Sukomal (2015) Performance Assessment of Partially Pre-fused Synthetic Flux in Basic Oxygen Steel Making. JOURNAL OF IRON AND STEEL RESEARCH, INTERNATIONAL, 22(10) (2.1). pp. 916-923. Pal, Jagannath and Rajshekar, Y and Kumar, Sanjay and Venugopalan, T (2021) Development of carbon composite iron ore slime briquettes for using in ironmaking. Journal of Metallurgy and Materials Science, Vol. 63, No. 1-2, January-June 2021 . pp. 1-11. PAL, Jagannath and GHORAI, Satadal and BANDYOPADHYAY, Debajyoti and GHOSH, Sukomal (2015) Performance Assessment of Partially Pre-fused Synthetic Flux in Basic Oxygen Steel Making. JOURNAL OF IRON AND STEEL RESEARCH, INTERNATIONAL. , 22(10): 916-923 (2.1). pp. 916-923. Pandey, B D and Abhilash, and Meshram, Pratima (2019) An overview of the recent status of critical and strategic metal production and development in India. In: Critical and Rare Earth Elements. CRC Press, Boca Raton, US, pp. 1-36. ISBN 978-0367086473 Paswan, Dayanand and Malathi, M and Minj, R K and Bandopadhyay, D (2015) Mill Scale: A Potential Raw Material for Iron and Steel Making. Steelworld , 21 . pp. 54-56. Paswan, Dayanand and Minj, R K and Singh, S D and Vaish, A K and Ghorai, S and Malathi, M and Mehta, K D and Prasad, S and Venugopalan, T (2014) Exploitation of banded hematite quartzite and Jhama coal for the production of higher grade ferro-silicon. IIM Metal News, 17(4) . pp. 23-28. Priya, Jayati and Randhawa, N S and Hait, Jhumki and Bordoloi, N and Patel, J N (2020) High purity copper recycled from smelter dust by sulfation roasting, water leaching and electrorefining. Environmental Chemistry Letters (IF-5.922). pp. 1-7. RRajshekar, Y and Pal, J and Venugopalan, T (2018) Development of hematite ore pellet utilizing mill scale and iron ore slime combination as additive. Journal of Mining and Metallurgy Section B: Metallurgy, 54(2) . pp. 197-208. Rajshekhar, Y and Pal, J and Venugopalan, T (2018) Mill scale as a potential additive to improve the quality of hematite ore pellet. Mineral Processing and Extractive Metallurgy Review, 39(3) (IF-1.5). pp. 202-210. Randhawa, N S and Jana, R K (2013) Different applications of waste generated in reduction roasting – ammonia leaching of manganese nodules. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM) 2013, 12-15 November 2013, IIT-BHU, Varanasi. Randhawa, N S and Jana, R K and Agarwal, Sanjay and Ghorai, S and Maity, S K and Pal, J (2007) Production of Fe-Si-Mn from leached sea nodule residue. In: Inter. Sem. on Mineral Processing Technology, 2007, 22-24 Feb, 2007, IIT Mumbai. Randhawa, N S and Jana, R K and Das, N N (2012) Manganese Nodules Residue: Potential Raw Material for FeSiMn Production. International Journal of Metallurgical Engineering, 1(2) . pp. 22-27. Randhawa, N S and Jana, R K and Das, N N (2012) Silicomanganese production utilising low grade manganese nodules leaching residue. Mineral Processing and Extractive Metallurgy (Trans. IMM C) (0.667). pp. 1-9. Randhawa, N S and Jana, R K and Das, N N (2012) Thermodynamics and Viscosity Aspects in Manganese Nodule Residue Smelting for Silicomanganese Production. International journal of Metallurgical Engineering, 1(5) . pp. 88-95. Randhawa, N S and Minj, R K (2020) An improved process for the production of low carbon ferromanganese. Transaction of Indian Institute of Metals (IF-1.205). pp. 1-7. Randhawa, N S and Mishra, D and Jana, R K (2010) Smelting of leached sea nodule residue blended with manganese ore for recovery of manganese. In: 14th Int. Conf. on non-ferrous Min. & Met. 2010, 9-10 July, 2010, Varanasi. Ranjan, P and Pal, J (2016) Salt solution treatment to prevent the low temperature reduction degradation of haematite pellet. Ironmaking and Steelmaking , 43(9) (IF-0.985). pp. 688-696. Roy, Mrinal and Bhatnagar, P P (1960) Studies on the Extraction of Vanadium pentoxide from Vanadium bearing Titaniferrous Magnetite ores of Bihar and Orissa. Other (TMP). CSIR-NML, Jamshedpur, Jamshedpur. YY, Rajshekar and Pal, J and T, Venugopalan (2018) Sintering characteristics and kinetics of acidic haematite ore pellets with and without mill scale addition. Ironmaking and Steelmaking, 45(4) . pp. 325-334. |