Coupling of electronic transport and defect engineering substantially enhances the thermoelectric performance of p-type TiCoSb HH alloy

Further advancements in thermoelectric technology rely on the capacity to control both electrical and thermal transport properties simultaneously. Although TiCoSb-based half-Heusler compounds are pro-mising for mid-range-temperature thermoelectric applications owing to their high Seebeck coefficient and good electrical conductivity, their high thermal conductivity has been so far the main issue to overcome. Here, we show that a combined approach of tuning the electronic properties and defect engineering en-hances the thermoelectric performance of p-type TiCoSb-based compounds. By alloying on the Co and Ti sites with Fe and Zr, respectively, an overall increase in the peak ZT value of up to similar to 90% at 823 K is achieved in Ti0.8Zr0.2Co0.85Fe0.15Sb. This enhancement is directly tied to the more pronounced metallic nature of transport upon Fe alloying combined with a significant reduction in thermal conductivity due to mass and strain field fluctuations driven by the substitution of Zr for Ti, as evidenced by the Debye-Callaway model. Further adjusting the hole concentration with aliovalent Sn doping leads to an additional increase in ZT, eventually leading to a peak value of similar to 0.54 at 823 K in Ti0.8Zr0.2Co0.85Fe0.15Sb0.96Sn0.04, which is 224% higher than in TiCo0.85Fe0.15Sb, and the highest value reported so far in Hf-free p-type TiCoSb based HH alloys.(c) 2023 Elsevier B.V. All rights reserved.