Items where Year is 2010

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 407.

Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D and Tamrakar, P K (2010) Bioleaching - an alternate uranium ore processing technology for India. In: 2nd International conference on Asian nuclear prospects, 11-13 October 2010, Mamallapuram, Chennai, India.

Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D and Tamrakar, P K (2010) Column Bioleaching of a Low-Grade Silicate Ore of Uranium. Mineral Processing and Extractive Metallurgy Review, 31 (4). pp. 224-235.

Abhilash, and Pandey, B D and Ray, L (2010) Kinetics and mechanism of uranium bioleaching from a low grade indian ore. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Abhilash, and Venkat Ramam, R and Mehta, K D and Pandey, B D (2010) Native Marine Isolates from Indian Ocean Nodules. Microbiology Focus, 2.3 . p. 7.

Acharya, S and Jena, M S and Mohanty, J K (2010) Aqueous alkaline processing of chromite mine overburden. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Agarwal, Sanjay and Sahu, K K and Godiwalla, K M and Rajak, D K and Smita, K and Jana, R K (2010) An experimental and thermodynamic study on reduction smelting of sea nodules to recover valuable metals. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Agrawal, A and Sahu, K K (2010) Problems, prospects and current trends of copper recycling in India: An overview. Resources, Conservation and Recycling, 54 (7). pp. 401-416.

Agrawal, A and Sahu, K K (2010) Treatment of Chloride Waste Pickle Liquor by Solvent Extraction for the Recovery of Iron. Mineral Processing and Extractive Metallurgy Review, 31 (3). pp. 121-134.

Al-Samman, T and Li, X and Ghosh Chowdhury, S (2010) Orientation dependent slip and twinning during compression and tension of strongly textured magnesium AZ31 alloy. Materials Science and Engineering: A, 527 (15). pp. 3450-3463.

Alex, T C and Kumar, Rakesh and Kailath, A J and Roy, S K and Mehrotra, S P (2010) Physicochemical changes during mechanical activation of boehmite. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Aman, Noor and Mishra, T and Sahu, Ranjan K and Tiwari, J P (2010) Facile synthesis of mesoporous N doped zirconium titanium mixed oxide nanomaterial with enhanced photocatalytic activity under visible light. Journal of Materials Chemistry, 20 (48). pp. 10876-10882.

Anil, M and Srivastava, V C and Ghosh, M K and Ojha, S N (2010) Influence of tin content on tribological characteristics of spray formed Al–Si alloys. Wear, 268 (11-12). pp. 1250-1256.

Anupam, A and Singh, G and Raghav, P K and Suresh, N (2010) Studies on beneficiation of BHQ samples by different methods. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Arora, K S and Pandey, S and Schaper, M and Kumar, Rajneesh (2010) Effect of process parameters on friction stir welding of aluminum alloy 2219-T87. The International Journal of Advanced Manufacturing Technology, 50 (9). pp. 941-952.

Arora, K S and Pandey, S and Schaper, M and Kumar, Rajneesh (2010) Microstructure Evolution during Friction Stir Welding of Aluminum Alloy AA2219. Journal of Materials Science & Technology, 26 (8). pp. 747-753.

Arthanareeswari, M and Sankara Narayanan, T S N and Kamaraj, P and Tamilselvi, M (2010) Influence of galvanic coupling on the formation of zinc phosphate coating. Indian Journal of Chemical Technology, 17 (3). pp. 167-175.

Aruna, V A J and Goswami, S N and Bawane, P R and Ram, Mohan and Gundewar, C S (2010) Enhancing chalcopyrite flotation by tackling hydrophobic silicate gangue. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Balusamy, T and Satendra, Kumar and Sankara Narayanan, T S N (2010) Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel. Corrosion Science, 52 . pp. 3826-3834.

Banerjee, Prasun and Ghosh, Gautam and Biswas, Salil K (2010) Measurement of dielectric properties of medium loss samples at X-band frequencies. Journal of Metallurgy and Materials Science, 52 (3). pp. 247-255.

Banerjee, T H and Sengupta, A K and Ram, Mohan (2010) Beneficiation of titaniferrous iron ore sample. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Bar, H N and Dayal, V and Barnard, D and Hsu, D K (2010) Plate Wave Resonance with Air-Coupled Ultrasonics. Review of Progress in Quantitative Nondestructive Evaluation, 29A 29B (1211). pp. 1069-1076.

Barik, Anil (2010) Effective management of coke oven solid waste and by-products in steel plant. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Baruah, B P and Khare, Puja and Dutta, D K and Dutta, N N (2010) Nagaland coals: suitability as an energy source. Proceedings of the XI International Seminar on Mineral Processing Technology, I . pp. 64-68.

Bedre, Mahesh D and Basavaraja, S and Deshpande, Raghunandan and Sawle, Balaji D and Lagashetty, Arun Kumar and Govindraj, B and Venkataraman, A (2010) Preparation and characterization of polyaniline-NiO nanocomposites via interfacial polymerization. Journal of Metallurgy and Materials Science, 52 (2). pp. 149-154.

Bedre, Mahesh D and Raghunandan, D and Basavaraja, S and Balaji, D S and Lagashetty, Arun Kumar and Venkataraman, A (2010) Preparation and characterization of Magnetic Fe3O4 nanoparticles. Journal of Metallurgy and Materials Science, 52 (3). pp. 209-214.

Behera, R K and Rout, K and Das, N N (2010) Mineralogical characterization and sorption properties of goethite rich iron ore from daitari, Orissa, India. Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), I . pp. 16-23.

Behera, R K and Satapathy, P K and Randhawa, N S and Das, N N (2010) Adsorptive Removal of Phosphate Ions Using Leached Sea Nodule Residue Generated by the Reduction–Roasting Ammoniacal Leaching Process. Adsorption Science & Technology, 28 (7). pp. 611-627.

Behera, S K and Sukla, L B and Mishra, B K (2010) Leaching of nickel laterite using fungus mediated organic acid and synthetic organic acid: a comparative study. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Beisembetov, I K and Kenzhaliev, B K and Zakharova, N A and Dosymbaeva, Z D (2010) Study and development of advanced technology for silver sorption recovery from multicomponent leaching solutions. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Besra, L and Sengupta, D K and Roy, S K (2010) Influence of flocculant overdosing on solid/liquid separation properties. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Bhagat, R P (2010) Effect of Bed Height on Strength of Sinter and other Sintering Indices. Steel India, 33 (2). pp. 184-191.

Bhanawat, S C and Ramarao, V V and Vishwanath, U (2010) Development of a fast and accurate method for testing of nigrosine. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Bharti, Amishi and Kumar, Gautam and Sinha, Moni and Chakraborty, D S (2010) Characterization of sinter return fines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Bhaskar Raju, G and Latha Priya, D and Latha, Swarna and Parvathy, S and Prabhakar, S (2010) Removal of organics from the waste waters of dyebath by electrooxidation. Asian Journal of Water, Environment and Pollution, 7 (4). pp. 19-23.

Bhattacharya, Sumantra and Dey, Shobhana (2010) An operator friendly performance index for frother selection and optimization in coal flotation. In: XVI International Coal Preparation Congress, 2010, Lexington, UK.

Bhattacharyya, A S and Mishra, Suman K (2010) Raman studies on nanocomposite silicon carbonitride thin film deposited by r.f. magnetron sputtering at different substrate temperatures. Journal of Raman Spectroscopy, 41 (10). pp. 1234-1239.

Bhattacharyya, A S and Mishra, Suman K and Mukherjee, S (2010) Correlation of structure and hardness of rf magnetron sputtered silicon carbonitride films. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 28 (4). pp. 505-509.

Borah, Sarat Ch and Das, Manash R and Tamuly, Chandan (2010) Characterization of graphite deposits of Arunachal pradesh. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Bui, Q V and Nam, N D and Choi, D H and Lee, J B and Lee, C Y and Kar, Abhijit and Kim, J G and Jung, S B (2010) Corrosion protection of ENIG surface finishing using electrochemical methods. Materials Research Bulletin, 45 (3). pp. 305-308.

Chakraborty, Debarun and Goswami, M C and Bhagat, R P (2010) Effect of process variables on sintering indices in relation to high LOI hematite ore fines of Gua mines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Chakraborty, Dolly and Ranganathan, S and Sinha, S N (2010) Carbothermic Reduction of Chromite Ore Under Different Flow Rates of Inert Gas. Metallurgical and Materials Transactions B, 41 (1). pp. 10-18.

Chakraborty, Jay and Kumar, Kishor and Ranjan, R and Ghosh Chowdhury, S and Singh, S R (2010) Stress, Texture and Phase Transformation in Titanium Thin Films. Texture and Anisotropy of Polycrystals, 160 . pp. 109-116.

Chakravarty, S and Mohanty, Ashok and Nag, Sudha T and Upadhyay, A K and Konar, J and Sircar, J K and Madhukar, A and Gupta, K K (2010) Removal of Pb(II) ions from aqueous solution by adsorption using bael leaves (Aegle marmelos). Journal of Hazardous Materials, 173 (1-3). pp. 502-509.

Chandraprabha, M N and Natarajan, K A (2010) Biomodulation of mineral surfaces for selective separation of pyrite from chalcopyrite: a ftir study. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Chatterjee, Amit and Raj, Manish (2010) How the steel industry can get the best out of Indian coal. Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), 1 (Section 6). pp. 411-418.

Chattopadhyay, U S and Gouri Charan, T and Kabiraj, S K and Haldar, D D (2010) Multi product beneficiation of non-coking coal from eastern coalfields—a case study. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Chaudhuri, S and Roy, Nilima and Ghosh, R N (2010) Assessment of creep and rupture behavior of 2.25Cr-1Mo steel — A strain based approach and its limitation. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 403-409.

Chaudhuri, Sanjay and Singh, K M P and Sharma, K K and Haldar, D D (2010) Beneficiation of coking coal fines lying in washery lagoons by froth flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Chawngte, Rimi Lalrinpuii and Khatri, Varsha (2010) Prospect of non/heat recovery coke oven plant in India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Chennakesavulu, K and Bhaskar Raju, G (2010) Mechanochemical Synthesis of p-Nitro Calix[6]arene. Asian Journal of Chemistry, 22 (6). pp. 4947-4949.

Chennakesavulu, K and Bhaskar Raju, G and Prabhakar, S (2010) A novel de-tert-butylation of p-tert-butylcalix[n]arenes. Asian Journal of Chemistry, 22 (7). pp. 5513-5516.

Chennakesavulu, K and Bhaskar Raju, G and Prabhakar, S (2010) Studies on the adsorption of arsenic on Cali[6]arene. Journal of Physical Organic Chemistry, 23 . pp. 723-729.

Chinnamaneni, Satya Vani and Balakrishnakurra, and Chintala, Rambabu and Kavuri, Sethu R and Mukkamala, S Babu (2010) Influence of vitamin B3 on morphosynthesis of CaCO3, BaCO3 and SrCO3 micro and nano structures. Journal of Metallurgy and Materials Science, 52 (4). pp. 351-356.

Choubey, Pankaj K and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2010) Leaching studies for the recovery of tin from the solder of waste printed circuit boards. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Choudhury, Samrat Sen and Bandyopadhyay, N R and Pramanick, A K and Bhattacharjee, S (2010) Syntheis and characterization of an aqueous nanometric iron hydroxide suspension suitable for the removal of As(III) and As(V). Journal of Metallurgy and Materials Science, 52 (3). pp. 215-229.

CSIR, (2010) CSIR Technofest - 2010: Theme 12: Mining, Minerals & Materials. In: CSIR Technofest - 2010, 14-27 November, 2010, New Delhi. (Unpublished)

Das, Avimanyu and Bhattacharyya, K K (2010) An improved process for the beneficiation of fine coking coal from Munidih area. Steel Tech, 4 (July). pp. 29-33.

Das, Avimanyu and Sarkar, B and Vidyadhar, A and Roy, Subrata (2010) Efficient Recovery of Combustibles From Coking Coal Fines. Mineral Processing and Extractive Metallurgy Review, 31 (4). pp. 236-249.

Das, Goutam and Das, Mousumi and Ghosh, Sabita and Dubey, A K (2010) Effect of aging on mechanical properties of 6063 Al-alloy using instrumented ball indentation technique. Materials Science and Engineering: A, 527 (6). pp. 1590-1594.

Das, Manash R and Sarma, Jyotirmoy and Sarma, Namrata and Mahiuddin, Sekh (2010) Characterization and ion specificity of the iron ore beneficiation waste. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Das, N N and Konar, J and Mohanta, M K and Upadhyay, A K (2010) Synthesis, characterization and adsorptive properties of hydrotalcite-like compounds derived from titanium rich bauxite. Reaction Kinetics, Mechanisms and Catalysis, 99 (1). pp. 167-176.

Das, Suchandan K and Das, Rashmita (2010) A Mathematical Model To Characterize Erosion Behaviour Of Boiler Grade Steels Impacted By Fly Ash In Coal Fired Power Plants. In: MS’10 Prague Proceedings of the International Conference on Modelling and Simulation 2010, 22 – 25 June 2010, Prague, Czech Republic.

Das, Suchandan K and Kumari, Preeti and Bhattacharyya, K K and Singh, Ratnakar (2010) A mathematical model to characterize separation behavior of a spiral for processing iron ore using a mechanistic approach. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Das, Suchandan K and Kumari, Preeti and Bhattacharyya, K K and Singh, Ratnakar (2010) A multi-input multi-output artificial neural network model to predict the separation characteristics of iron ore by a magnetic separator. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Das, Suchandan K and Kumari, Sabita (2010) A Multi-Input Multi-Output Neural Network Model To Characterize Mechanical Properties Of Strip Rolled High Strength Low Alloy (HSLA) Steel. In: MS’10 Prague Proceedings of the International Conference on Modelling and Simulation 2010, 22 – 25 June 2010, Prague, Czech Republic.

Das, Suchandan K and Mehrotra, S P and Godiwalla, K M (2010) Technological advances in Refining and Processing of stainless Steel - A brief overview. In: Advances in Stainless Steel. Series in Metallurgy and Materials Science . University Press of India Pvt, Hyderabad, pp. 431-452. ISBN 9788173716966

Das Biswas, Rupa and Upadhyay, A K and Kumari, Rashmi and Mohanty, Ashok and Gupta, K K and Konar, J and Chakravarty, S (2010) Uncertainty of measurement for determination of major elements in iron ore using ICP-OES. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Dayal, V and Pan, S K and Mukherjee, S K and Rai, S (2010) Commercial utilization of waste/low-grade iron ore fines in SAIL mines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

De, Santanu and Palit Sagar, S and Dey, Swapna and Prakash, Amit and Chattoraj, I (2010) Quantification of pitting in two tempers of 7075 aluminium alloy by non-destructive evaluation. Corrosion Science, 52 (5). pp. 1818-1823.

Deb, M K and Verma, D and Verma, S K and Bodhankar, N and Sircar, J K (2010) Quantitative analysis of inorganic ions in soil employing diffuse reflectance Fourier transform infrared spectroscopy (DRS-FTIR). Journal of the Indian Chemical Society, 87 (11). pp. 1317-1327.

Dey, Shobhana and Bhattacharya, Sumantra (2010) A new approach to performance optimization in coal flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Dey, Sujit Kumar and Vidyadhar, A and Das, Avimanyu (2010) Study of progeny particle size distribution in an impact hammer mill. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Dey, Swapna and Das, S K and Basumallick, A and Chattoraj, I (2010) The Effect of pitting on fatigue lives of peak-aged and overaged 7075 aluminum alloys. Metallurgical and Materials Transactions A , 41A . pp. 3297-3307.

Dhal, B and Abhilash, and Mehta, K D and Kumar, Vinay and Pandey, B D (2010) Bio-processing for metal extraction, recycling and effluent treatment- an overview. In: International Conference on Non-ferrous Metals 2010, 10-11th Aug 2010, Varanasi.

Dhal, B and Abhilash, and Mehta, K D and Pandey, B D (2010) Microbial Bioremediation of Chromium: A promising approach of environmental microbiology. In: Microbial Biotechnology. APH Pub. Corp., New Delhi, New Delhi, pp. 130-168. ISBN ISBN 978-81-313-0849-3

Dhal, B and Das, N N and Thatoi, Hruayanath and Pandey, B D (2010) Kinetic aspects of Cr(VI) bioremediation of water and soil contaminated from chromite mine overburden dumps. In: XI International Seminar on Mineral Processing Technology (MPT-2010), 15-17th Dec. 2010, NML Jamshedpur.

Dhal, B and Thatoi, Hruayanath and Das, N N and Pandey, B D (2010) Reduction of hexavalent chromium by Bacillus sp. isolated from chromite mine soils and characterization of reduced product. Journal of Chemical Technology & Biotechnology, 85 (11). pp. 1471-1479.

Director, NML (2010) Annual Report 2009-2010. CSIR-National Metallurgical Laboratory, Jamshedpur. ISBN 0972-4273

Director, NML (2010) Director's Desk: 58th RC Meeting of CSIR-NML (English Version). NML, Jamshedpur.

Director, NML (2010) NML Diamond Jubilee Souvenir. In: NML Diamond Jubilee Souvenir. National Metallurgy Laboratory, Jamshedpur.

Director, NML (2010) NML Technology Handbook. National Metallurgical Laboratory, Jamshedpur.

Director, NML (2010) NML: Glimpses of Life and Times. In: NML Diamond Jubilee Celebrations, Nov 26-27, 2010, NML Jamshedpur, India.

Dodbiba, G and Dai, D and Okaya, K and Matsuo, S and Fujita, T (2010) Treatment of arsenic-containing acid mine drainage by micro-bubble flotation. Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), 2(Section 14) . pp. 1175-1180.

Dutta, K and Sivaprasad, S and Tarafder, S and Ray, K K (2010) Influence of asymmetric cyclic loading on substructure formation and ratcheting fatigue behaviour of AISI 304LN stainless steel. Materials Science and Engineering A, 527 (29-30). 7571-7579 .

Ebrahimifar, Hadi and Zandrahimi, Morteza (2010) The effect of chromia scale thickness on ASR of solid oxide fuel cell interconnects at presence of Mn3O4 and MnFe2O4 spinels. Journal of Metallurgy and Materials Science, 52 (1). pp. 103-107.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2010) Evaluation of electrical conductivity activation energy of manganese coated Fe-17%Cr ferritic stainless steel. Journal of Metallurgy and Materials Science, 52 (3). pp. 273-278.

Ebrahimifar, Hadi and Zandrahimi, Morteza (2010) Reduced parabolic rate constant at presence of Mn3O4 and MnFe2O4. Journal of Metallurgy and Materials Science, 52 (3). pp. 267-271.

Ebrahimifar, Hadi and Zandrahimia, Morteza (2010) Coating of AISI 430 ferritic stainless steel used in SOFCs in a Co-base pack mixture. Journal of Metallurgy and Materials Science, 52 (2). pp. 155-160.

Eslamian, Atiye and Rezai, Bahram and Mohammad, Reza Aslani (2010) Study and prediction of a relationship between particles shape characteristics of minerals and their flotation kinetics. Proceedings of the XI International Seminar on Mineral Processing Technology, I . pp. 43-46.

Garg, Niti and Scholl, Clark and Mohanty, Ashok and Jin, Rongchao (2010) The Role of bromide ions in seeding growth of Au nanorods. Langmuir, 26 (12). pp. 10271-10276.

Ghosh, M and Gunjan, M K and Das, Swapan K and Kar, Abhijit and Ghosh, R N and Ray, Ajoy K (2010) Effect of Mn on Sn–Ag–Cu ternary lead free solder alloy–Cu assembly: a comparative study. Materials Science and Technology, 26 (5). pp. 610-614.

Ghosh, M and Kumar, K and Kailas, S V and Ray, Ajoy K (2010) Optimization of friction stir welding parameters for dissimilar aluminum alloys. Materials & Design, 31 (6). pp. 3033-3037.

Ghosh, M and Kumar, K and Mishra, R S (2010) Analysis of microstructural evolution during friction stir welding of ultrahigh-strength steel. Scripta Materialia, 63 (8). pp. 851-854.

Ghosh, Sabita and Tarafder, Mita and Sivaprasad, S and Tarafder, S (2010) Experimental and numerical study of ball indentation for evaluation of mechanical properties and fracture toughness of structural steel. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 617-622.

Ghosh Chowdhury, S and Munda, Parikshit and Singh, S R (2010) Development of Advanced High Strength Steels (AHSS) for Automobiles: A Review on Design Criteria. In: International Conference : Automotive Materials & Manufacturing - 2010, Oct 2010, Pune.

Goenka, Ashish and Bhunia, Kamalendu and Shukla, Satish Chandra and Kundu, Gautam (2010) Effect of particle shape on settling characteristics. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Goswami, B and Ray, Ashok K (2010) Emerging trends in alternative processing and weather effects of Al-Li-X alloys. Journal of Metallurgy and Materials Science, 52 (3). pp. 187-208.

Goswami, B and Ray, Ashok K (2010) Emerging trends in joining processes of Al-Li-X alloys. Journal of Metallurgy and Materials Science, 52 (2). pp. 109-128.

Goswami, B and Ray, Ashok K (2010) Emerging trends in precipitation phenomenon of Al-Li-X alloys. Journal of Metallurgy and Materials Science, 52 (1). pp. 19-45.

Goswami, Linee and Khare, Puja and Baruah, B P (2010) Emission of fine particulates and SO2 during coke making—a pilot plant study. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Gouri Charan, T and Haldar, D D and Nagnoor, P C (2010) Studies on the cleaning potentialties of IB valley coal by washability investigations. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Govindaraj, M and Muthkumar, M and Bhaskar Raju, G (2010) Electrochemical oxidation of tannic acid contaminated wastewater by RuO2/IrO2/TaO2-coated titanium and graphite anodes. Environmental Technology, 31 (14). pp. 1613-1622.

Goyal, Anshul and Roy, Papiya and Banerjee, P K (2010) Effect of air core on flow rate and split in a hydrocyclone. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Guha, Avijit and Nayar, S and Thatoi, Hruayanath (2010) Microwave irradiation enhances kinetics of the biomimetic process of hydroxyapatite nanocomposites. Bioinspiration & Biomimetics, 5 (2). 024001.

Gupta, Ramendra (2010) Challenges and opportunities in uranium processing industry in India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Gupta, Siddhi and Sinha, Satish and Sinha, Arvind (2010) Composition dependent mechanical response of transparent poly(vinyl alcohol) hydrogels. Colloids and Surfaces B: Biointerfaces, 78 (1). pp. 115-119.

Gurulaxmi, S N and Ghosh, T K and Mukherjee, A K (2010) State of art characterization study of banded hematite jasper for the purpose of beneficiation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Haldar, D D (2010) Beneficiation of non-coking coals: basic concepts and technology routes. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Hatami, Mahdi Kazemi and Barsoum, Zuheir (2010) Fatigue assessment of cruciform joints welded in different positions. Journal of Metallurgy and Materials Science, 52 (1). pp. 87-102.

Haxhiaj, A and Haxhiaj, E (2010) The optimization of the quantity of coke and agglomerate in lead production in 'Water-jacket' furnace. Journal of Metallurgy and Materials Science, 52 (3). pp. 257-265.

Herbert, M A and Das, Goutam and Maiti, R and Chakraborty, M and Mitra, R (2010) Tensile properties of cast and mushy state rolled Al-4.5Cu alloy and in situ Al4.5Cu-5TiB(2) composite. International Journal of Cast Metals Research, The, 23 (4). pp. 216-224.

Holmes, Ralph J (2010) CSIRO carbon steel raw materials research. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Humane, M M and Minj, R K and Paretkar, R K and Peshwe, D R (2010) Effect of cold rolling and mode of annealing on textures, mechanical properties and formability limit diagrams in interstitial free steel sheets. Transactions of the Indian Institute of Metals, 63 (6). pp. 867-880.

Humane, M M and Minj, R K and Peshwe, D R and Paretkar, R K (2010) Effect of two step cold rolling — continuous annealing on micro-structures, textures and mechanical properties in IF and IF-HS steel sheets. Transactions of the Indian Institute of Metals, 63 (1). pp. 21-30.

Ismail, A K (2010) Energy saving during alum production from kaolin with coproduction of alumina-silica composites from process silica wastes. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Jain, Jitendra and Soni, S L and Sharma, Dilip (2010) Determination of wear rate of steel in high pressure and temperature zone for prediction of balance life of autofretagged tubes. Journal of Metallurgy and Materials Science, 52 (2). pp. 181-187.

Jayabal, S and Natarajan, U (2010) Effect of fibre length and fibre content on the mechanical properties of coir fiber/polyester composites. Journal of Metallurgy and Materials Science, 52 (4). pp. 341-350.

Jha, G S and Chattopadhyay, P C and Prasad, P S and Mitra, A N and Maji, S C and Gouri Charan, T and Haldar, D D (2010) Washability studies and characterization of cleans of coking coal sample from BCCL, CIL, India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Jha, Manis K and Kumari, Archana and Choubey, Pankaj K (2010) E-waste recycling: alternative metal resources. Mineral and Metal Review (5). pp. 50-53.

Jha, Manis K and Shivendra, and Kumar, Vinay and Pandey, B D and Kumar, Rakesh and Lee, Jae-chun (2010) Leaching studies for the recovery of metals from the waste printed circuit boards (PCBs). In: Proceedings of TMS-2010, Feb 2010.

Jin, Rongchao and Qian, Huifeng and Wu, Zhikun and Zhu, Yan and Zhu, Manzhou and Mohanty, Ashok and Garg, Niti (2010) Size focusing: a methodology for synthesizing atomically precise gold nanoclusters. The Journal of Physical Chemistry Letters, 1 (19). pp. 2903-2910.

Joseph, P F and Prasad, V G K and Janarthanan, A J and Bhaktadarsan, K S (2010) Enhanced zircon recovery through centrifugal jigging. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Joseph, P F and Prasad, V G K and Janarthanan, A J and Chandrasekar, V (2010) Environmental management in beach sand mining and processing—a role model. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Joseph, P F and Prasad, V G K and Janarthanan, A J and Viswanath, R V (2010) Wet high intensity magnetic separation: efforts taken to adapt the machine to the mineral separation plant of IREL, chavara. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Jyoti, Divya and Rath, R K and Mohanty, Sunati and Singh, Ratnakar and Bhattacharyya, K K (2010) Beneficiation of a finely disseminated low-grade iron ore by froth flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kanari, N and Mishra, D and Fillipov, L and Diot, F and Mochon, J and Allain, E (2010) Kinetics of hematite chlorination with Cl(2) and Cl(2) + O(2). Part II. Chlorination with Cl(2) + O(2). Thermochimica Acta, 506 (1-2). pp. 34-40.

Kanari, N and Mishra, D and Fillipov, L and Diot, F and Mochon, J and Allain, E (2010) Kinetics of hematite chlorination with Cl(2) and Cl(2) + O(2): Part I. Chlorination with Cl(2). Thermochimica Acta, 497 (1-2). pp. 52-59.

Kanari, N and Mishra, D and Mochon, J and Verdeja, L F and Diot, F and Allain, E (2010) Some kinetics aspects of chlorine-solids reactions. REVISTA DE METALURGIA, 46 (1). pp. 22-36.

Kar, A K and Rath, R K and Mohanta, M K and Singh, Ratnakar and Kumar, Anil (2010) Characterisation and surface chemical studies on ultrafine iron ore. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kenzhaliev, B K and Abdykirova, G Zh. and Zhapbasbaev, U K and Beisembaeva, G Zh. and Suleimenov, E N (2010) Development of new modifying reagent- assisted technology for rebellious gold-bearing ores processing. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kenzhaliev, B K and Berkinbaeva, A N and Beisembaeva, G Zh. and Asilbekov, B and Suleimenov, E N (2010) Development of resource saving technology for gold recovery with intensifying additives. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kenzhaliev, B K and Berkinbayeva, A N and Khodaryova, T A (2010) Effects of microorganisms and their metabolites on nonferrous and precious metal ores leaching. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kenzhaliev, B K and Lozhnikov, S S and Chanturiya, V A and Zhapbasbaev, U K and Suleimenov, E N (2010) Development of combined technology for rebellious metamorphized polymetallic ores. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kenzhaliev, B K and Yarmukhamedov, E K and Akhmetova, K. Sh. and Ponomaryova, E I and Atanova, K. Sh. (2010) Extraction of gold from heap cyanic solutions of polymetallic ores by polycondensational anionites. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Khare, Puja and Sahu, O P and Baruah, B P (2010) Chemometric analysis: a tool to predict the release behaviour of hazardous trace elements (HTEs) during coal mining and utilization. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kim, Joon-Soo and Lee, Jin-Young and Kumar, J Rajesh and Yoon, Ho-Soon (2010) Leaching methodologies for uranium. Journal of Metallurgy and Materials Science, 52 (1). pp. 1-17.

Kopparthi, Prasad and Gupta, Ashiwanit Kumar and Banerjee, P K (2010) The effect of softening recycled water on coal flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kumar, Abhishek and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2010) Solvent extraction: a potential tool for the separation of metals from leach liquor of electronic scraps. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kumar, Aman (2010) Increasing crushing circuit efficiency. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kumar, Binod and Pramanick, A K (2010) A Dissertation Report on Hydrophilic Coating on Glass Substrate. Masters thesis, National Institute of Foundry and Forge Technology, Hatia, Ranchi.

Kumar, G and Singh, S K and Sinha, B K and Prasad, Bikas (2010) Ground water recharge potential of the tasra block of chasnala—a case study. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kumar, Harendra and Mohapatra, J N and Roy, Rajat K (2010) Evaluation of tempering behaviour in modified 9Cr–1Mo steel by magnetic non-destructive techniques. Journal of Materials Processing Technology, 210 (4). pp. 669-674.

Kumar, M (2010) Synthesis, characterization and phase equilibrium of perovskite oxides and development of intermediate temperature solid oxide fuel cells. PhD thesis, University of Madras.

Kumar, M Ashok and Reddy, K Hemachandra and Reddy, Y Venkata Mohana and Reddy, G Ramachandra and Kumar, N S Venkatesh and Reddy, BH Nanjunda (2010) Assessment of nanoclay filled epoxy on mechanical, thermal and chemical resistance properties of nanocomposites. Journal of Metallurgy and Materials Science, 52 (4). pp. 305-315.

Kumar, Manoj and Babu, M Nani and Mankhand, T R and Pandey, B D (2010) Precipitation of sodium silicofluoride (Na2SiF6) and cryolite (Na3AlF6) from HF/HCl leach liquors of alumino-silicates. Hydrometallurgy, 104 (2). pp. 304-307.

Kumar, Pawan and Sah, Rakesh and Vidyadhar, A and Das, Avimanyu (2010) Dry beneficiation of coal fines using air table. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kumar, Rakesh and Kumar, Sanjay and Alex, T C and Srikanth, S and Mehrotra, S P (2010) Process innovations using mechanical activation of minerals and wastes. In: Experimental and theoretical studies in modern mechanochemistry. Transworld Research Network, Trivandrum, pp. 255-272. ISBN 978-81-7895-454-7

Kumar, Sanjay and Kumar, Rakesh (2010) Tailoring geopolymer properties through mechanical activation of fly ash. In: 2nd International conference on sustainable construction materials and technologies, 28-30 June, 2010, Ancona, Italy.

Kumar, Sanjay and Kumar, Rakesh and Mehrotra, S P (2010) Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer. Journal of Materials Science, 45 (3). pp. 607-615.

Kumar, Shivesh and Rath, R K and Singh, Ratnakar and Kumar, Anil (2010) Separation of iron bearing minerals from slime by flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kumar, Vinay and Jha, Manis K and Kumar, Manoj and Jeong, Jinki and Lee, Jae-chun (2010) Extraction of copper from sulfate leach solution containing minor metallic constituents in mixer settler unit. EPD Congress (TMS) . pp. 413-420.

Kumar, Vinay and Sahu, S K and Pandey, B D (2010) Prospects for solvent extraction processes in the Indian context for the recovery of base metals. A review. Hydrometallurgy, 103 (1-4). pp. 45-53.

Kumar, Vinod and Jadhav, G N and Khosla, N K and Mehrotra, S P (2010) Implication of process mineralogy for beneficiation of low grade iron ore resources containing high alumina from eastern part of India. Proceedings of the XI International Seminar on Mineral Processing Technology, I . pp. 82-91.

Kumari, Archana and Jha, Manis K and Kumar, Vinay and Jeong, Jinki and Lee, Jae-chun (2010) Recovery of lead from the solder of waste printed circuit boards. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Kumari, Asha and Jha, Manis K and Kumar, Vinay (2010) A Novel technique Pulse Sieve Plate Column: Prospect of its utilization for solvent extraction of copper from sulfate solution. Training Report (TR). National Metallurgical Laboratory, Jamshedpur. (Unpublished)

Kumari, Neha and Vidyadhar, A and Konar, J and Bhagat, R P (2010) Beneficiation of iron ore slimes from Karnataka through dispersion and selective flocculation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Lagashetty, Arun Kumar and Bedree, Mahesh and Venkataraman, A (2010) Adsorption study of Pb+2 ions on nanoceramics. Journal of Metallurgy and Materials Science, 52 (4). pp. 357-362.

Lakshmipathiraj, P and Prabhakar, S and Bhaskar Raju, G (2010) Studies on the electrochemical decontamination of wastewater containing arsenic. Separation and Purification Technology, 73 . pp. 114-121.

Lal, S M and Ram, Mohan and Gundewar, C S (2010) Beneficiation of a low grade magnetite ore from Jharkhand area. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Lendave, S A and Karande, V S and Deskmukh, L P (2010) Structural and transport characteristics of HgxCd1-xS thin composite films : A correlation. Journal of Metallurgy and Materials Science, 52 (4). pp. 363-370.

Liu, Peikun and Cui, Xueqi and Wang, Xiaopeng (2010) Application of new type pre-classification hydrocyclone with centrifugal volute in grinding process. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mahato, M M and Agrawal, M K and Sinha, S N (2010) Production of sg grade pig iron by optimising slag chemistry in mini blast furnace. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Maity, S and Chandrasekhar, M and Godiwalla, K M and Bhattacharyya, P and Nayak, B and Minj, R K and Mehrotra, S P (2010) A study of separation of iron powder and preparation of Ti-Al alloy by selective electrolysis of ilmenite. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Malode, Parag and Chhangani, Ravindra and Datta, Amlan and Basu, Biswajit (2010) DEM analysis of the role of lifter design on performance of rotary cooler. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mandal, D and Dutta, B K and Panigrahi, S C (2010) Influence of coating and alloy additions on distribution of fibres and hardness of cast aluminium base short steel fibre reinforced composites. Materials Science and Technology, 26 (2). pp. 157-163.

Mandal, G K and Das, Swapan K and Balasubramaniam, R and Mehrotra, S P (2010) Effect of Elevated Strip Entry Temperature on the Aluminum Rich Inhibition Layer at the Substrate Coating Interface During Galvanizing. Canadian Metallurgical Quarterly , 49 (3). pp. 301-309.

Mandal, S K (2010) Study of particle dynamics in Floatex Density Separator through image processing and analysis technique. In: Proceedings of First International Joint Conference on Information & Communication Technology 09-10 January 2010, January 09-10, 2010, Interscience Institute of Management & Technology, Bhubaneswar.

Manju, M S and Savithri, S (2010) Three dimensional cfd simulation of pneumatic coal injection in a direct reduction rotary kiln. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mehta, K D and Das, Chitrangada and Kumar, Rakesh and Pandey, B D and Mehrotra, S P (2010) Effect of mechano-chemical activation on bioleaching of Indian Ocean nodules by a fungus. Minerals Engineering, 23 . pp. 1207-1212.

Mehta, K D and Das, Chitrangada and Pandey, B D (2010) Leaching of copper, nickel and cobalt from Indian Ocean manganese nodules by Aspergillus niger. Hydrometallurgy, 105 (1-2). pp. 89-95.

Mehta, K D and Das, Chitrangada and Pandey, B D (2010) Reductive leaching of valuable metals from indian ocean nodules by bacillus circulans. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mehta, K D and Pandey, B D and Nayak, B and Kumar, Vinod and Upadhyay, A K and Abhilash, (2010) Final Project Report on "Microbial Leaching of uranium from Narwapahar ore". Exploratory (OLP). NML, Jamshedpur. (Submitted)

Meshram, Pratima and Sahu, S K and Sinha, Manish K and Khan, Pritam and Pandey, B D and Mankhand, T R (2010) Solvothermal synthesis of high value copper powder from Copper bleed solution. In: NMD - ATM 2010, 14-16th November 2010, National Science Seminar Complex, Indian Institute of Science, Bangalore.

Mir, Aparna and Mallik, D and Bhattacharya, S and Mahata, D and Sinha, Arvind and Nayar, S (2010) Aqueous ferrofluids as templates for magnetic hydroxyapatite nanocomposites. Journal of Materials Science-Materials in Medicine, 21 (8). pp. 2365-2369.

Mishra, D and Sahu, K K and Agrawal, A and Jana, R K (2010) Selective Reduction of Cu, Ni & Co from Aqueous Solutions through Hydrothermal Route for Production of Metal Powders. Collaborative (CLP). NML, NML, JSR. (Submitted)

Mishra, I B (2010) Investigation of concrete foundation to assess the cause of failure of the Transmission Tower of Power Grid Corporation Ltd. erected by KEC International Ltd near Bihar-Sharif in Bihar. Consultancy (CNP). National Metallurgy Laboratory, Jamshedpur. (Unpublished)

Mishra, P K and Asadullah, I M and Lal, H S (2010) Environmental impact of coal-carbonization and its bioremediation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mishra, P N and Panda, Krushna C and Goswami, N G (2010) Citation analysis and research impact of National Metallurgical Laboratory, India during 1972- 2007: a case study. Malaysian Journal of Library & Information Science, 15 (1). pp. 91-113.

Mishra, T (2010) Transition Metal Oxide-Pillared Clay Catalyst: Synthesis to Application. In: A. Gil et al. (eds.), Pillared Clays and Related Catalysts, 2010, DOI 10.1007/978-1-4419-6670-4_5, © Springer Science+Business Media, LLC 2010.

Mishra, T and Pal, S and Patel, J N and Bhattacharjee, S (2010) Study on arsenic removal capacity of iron oxide pillared montmorillonite clay from ground water. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mishra, T and Sahu, Ranjan K and Lim, S -H and Salamanca-Riba, L G and Bhattacharjee, S (2010) Hexadecylamine capped silver and gold nanoparticles: Comparative study on formation and self-organization. Materials Chemistry and Physics, 123 (2-3). pp. 540-545.

Mitra, A and Sinha, Arvind and Mishra, Suman K and Sahoo, K L (2010) Nanostructured materials: research at NML. Nano Digest, 2 (3). pp. 42-44.

Moaveni, A Kamali and Noaparast, M and Rezai, B (2010) The effect of different parameters on the power draw of miduk copper concentrator sag mill. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Moazemi, M and Rezai, B (2010) Desilication studies of diasporic bauxite by thermochemical treatment. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mohanta, Ojaswini and Basumallick, A and Mitra, A and Panda, A K (2010) Enhancement in soft magnetic and ferromagnetic ordering behaviour through nanocrystallisation in Al substituted CoFeSiBNb alloys. Journal of Magnetism and Magnetic Materials, 322 (1). pp. 112-118.

Mohanty, Ashok and Garg, Niti and Jin, Rongchao (2010) Robust gold nanoparticles stabilized by trithiol for application in chemiresistive sensors. Nanotechnology, 21 . p. 405501.

Mohanty, Ashok and Garg, Niti and Jin, Rongchao (2010) A Universal Approach to the Synthesis of Noble Metal Nanodendrites and Their Catalytic Properties. Angewandte Chemie International Edition, 49 (29). pp. 4962-4966.

Mohanty, Sunati and Nayak, B and Bhattacharyya, K K (2010) High intensity magnetic separation of iron ore slime and its limitations. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mohapatra, B J and Singh, S K and Rao, D S and Martha, R K and Mishra, S (2010) Characterisation of BOG manganese ore associated with BIF in iron ore group, north orissa for its optimum utilization. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Mohapatra, J N and Bandopadhyay, N R and Gunjan, M K and Mitra, A (2010) Study of high-temperature ageing and creep on bainitic 5Cr–0.5Mo steel by magnetic NDE techniques. Journal of Magnetism and Magnetic Materials, 322 (6). pp. 589-595.

Mohapatra, J N and Swaminathan, J and Ghosh, M K and Mitra, A (2010) Magnetic Nondestructive Evaluation of Creep Behavior in Water-Quenched Modified 9Cr-1Mo Steel. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 41A (4). pp. 900-905.

Mondal, G C and Singh, Abhay Kumar and Singh, T B and Tewary, B K and Sinha, Amlendu (2010) Wet and dry deposition of atmospheric pollutants around coal mining area of Dhanbad and Bokaro District. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Munda , Parikshit and Das, Swapan K and Ghosh Chowdhury, S and Das, Goutam and Singh, S R (2010) Investigation on the Failure of Gear Pump. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Murugananthan, M and Bhaskar Raju, G (2010) Removal of organic dyes and tannins by electrochemical techniques. Photo-electrochemistry & photobiology for the sustainability, 1 (Chapter 8). pp. 189-215.

Murugananthan, M and Latha, S S (2010) Anodic oxidation of ketoprofen- an anti inflammatory drug using boron doped diamond and platinum electrodes. Journal of Hazardous Materials, 180 (1-3). pp. 753-758.

Murugananthan, M and Latha, S S and Bhaskar Raju, G and Yoshihara, S (2010) Anodic oxidation of ketofrofen-an anti-inflammatory drug using boron doped diamond electrode. Journal of Hazardous Materials, 180 . pp. 753-758.

Narasaiah, N and Sivaprasad, S and Chattopadhyay, J and Kushwaha, H S and Roos, E and Tarafder, S (2010) Effect of constraint on fracture parameters of piping materials. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 541-545.

Narasaiah, N and Tarafder, S and Sivaprasad, S (2010) Effect of crack depth on fracture toughness of 20MnMoNi55 pressure vessel steel. Materials Science and Engineering: A, 527 (9). pp. 2408-2411.

Narasimha, M and Brennan, M S and Holtham, P N (2010) Multi-phase modelling of hydrocyclone: validation of particle size distributions against sampling probe data. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Natarajan, K A (2010) Biotechnological innovations in iron ore beneficiation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Nath, S K and Kumar, Sanjay (2010) Wear Resistant Ceramics from Fly Ash. In: National Seminar on Refractories & Furnaces for Energy Efficient & Environment Friendly Steel & Metal Processing, 09-10 September, 2010, CGCRI, Kolkata. (Unpublished)

Nayak, B and Vaish, A K and Singh, S D and Bhattacharyya, K K (2010) Petrography, Chemistry and Economic Potential of the Magnetite Ores of Pokphur Area, Nagaland. MEMOIR GEOLOGICAL SOCIETY OF INDIA, 75 . pp. 341-348.

Nayar, S and Mir, Aparna and Ashok, Aarti and Guha, Avijit and Sharma, Vikas (2010) Bovine Serum Albumin Binding and Drug Delivery Studies with PVA-Ferrofluid. Journal of Bionic Engineering, 7 (1). pp. 29-34.

Nayar, S and Palit Sagar, S and Guha, Avijit (2010) Non-destructive evaluation of mechanical properties of poly (vinyl) alcohol-hydroxyapatite nanocomposites. Journal of Materials Science-Materials in Medicine, 21 (4). pp. 1099-1102.

Nguyen, N V and Jeong, Jinki and Jha, Manis K and Lee, Jae-chun and Osseo-Asare, Kwadwo (2010) Comparative studies on the adsorption of Au(III) from waste rinse water of semiconductor industry using various resins. Hydrometallurgy, 105 (1-2). pp. 161-167.

Nguyen, N V and Lee, Jae-chun and Kim, Soo-kyoung and Jha, Manis K and Chung, Kang-Sup and Jeong, Jinki (2010) Adsorption of gold(III) from waste rinse water of semiconductor manufacturing industries using Amberlite XAD-7HP resin. Gold Bulletin, 43 (3). pp. 200-208.

Onal, Guven and Acarkan, Neset and Bulut, Gulay and Gul, Alim (2010) Recovery from complex ore by floatation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Padmanabhan, N P H and Suri, A K and Ghosh, S K (2010) R&D input to extraction of uranium from different primary and secondary resources in India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Paetzke, N and Shakhverdova, I P and Levin, A A and Reibold, M and Kochmann, W and Paufler, P and Meyer, D C (2010) Nanoindentation behaviour and microstructure of several wootz-type steels. Journal of Metallurgy and Materials Science, 52 (1). pp. 47-65.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Ghosh, Sukomal and Ghosh, Dinabandhu and Bandyopadhyay, D (2010) Performance Assessment of CO2 Treated Fluxed Iron Oxide Pellets in Basic Oxygen Steel Making Process. ISIJ International, 50 (1). pp. 105-114.

Pal, J and Ghorai, S and Singh, D P and Upadhyay, A K and Goswami, M C and Bandyopadhyaya, D and Ghosh, Dinabandhu and Ghosh, Sukomal (2010) Refining of hot metal utilizing fluxed iron oxide pellets. In: NMD-ATM 2010, 14-16 Nov, 2010, IISC, Bangalore.

Palit, M R and Rudramuniyappa, M V (2010) Beneficiation studies on low-grade, limestone of Shahabad area, Shahabad, Gulbarga district, Karnataka. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Palit Sagar, S and Hua , Jia Jerry and Rose, Joseph (2010) Ultrasonic Guided Wave Phased Array Inspection of Pipelines. Journal of Non destructive Testing & Evaluation, 9 (2). pp. 33-36.

Panda, A K and Mitra, A and Mohapatra, J N (2010) Magnetic Barkhausen Emissions: A Tool to Study Creep Damage in Steel. In: 8th International conference on Barkhausen Noise and Micromagnetic Testing (ICBM8), , Feb 11-12, 2010, Anupuram, India.

Panda, A K and Mohanta, Ojaswini and Basumallick, A and Mitra, A (2010) Low temperature magnetization behavior in Co36Fe36Si3Al1Nb4B20 (at%) nanostructured alloy. Journal of Magnetism and Magnetic Materials, 322 (23). pp. 3802-3806.

Panda, Bijayalaxmi and Das, S C and Panda, R K (2010) Oxidation of sulfurous acid on a graphite anode in the presence and absence of cobalt ion during electrodeposition of copper from a acidic sulfate bath. Journal of Metallurgy and Materials Science, 52 (3). pp. 231-237.

Panda, S and Panda, S K and Nayak, B D and Rao, D S and Pradhan, N and Sukla, L B and Mishra, B K (2010) Effect of thermal activation on recovery of copper using microorganisms from ball mill spillage. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Panda, S R and Barik, Anil (2010) Impact of iron ore mines generated pollutants on peripheral environment and its effective management—a case study of Koira region, Odisha. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Pandya, Achal and Singh, D D N (2010) The Delhi Iron Pillar: A study of the Corrosion Formed in Areas of Surface Deformation. Metal 2010 : Charleston, South Carolina, USA . pp. 1-6.

Pani, Santosh and Dey, Shobhana and Mohanta, M K and Singh, Ratnakar (2010) An approach for recovery of iron values from slimes. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Pansare, J N and Samant, Roopali and Kulkarni, M M and Pandey, P K and Mani, T V (2010) Tailored clays for acid and effluent treatment. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Park Kyung-Ho, Nam Chul-Woo, Mishra Devabrata (2010) Leaching method of valuable metals from synthetic matte. 10-0999194/01.12.2010.

Parkih, S C and Purohit, Anil and Verma, Vijay and Agarwal, L K and Singh, Ashish K (2010) Recovery of lead, silver and manganese from anode mud generated at zinc smelter Debari (Udaipur). In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Parmar, Kavita and Pramanick, A K and Bandopadhyay, N R and Bhattacharjee, S (2010) Synthesis and characterization of Fe(III)-silicate precipitation tubes. Materials Research Bulletin, 45 (9). pp. 1283-1287.

Parveen, Nikhat and Murthy, G V S (2010) Studies on ilmenite for applications as electronic materials. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Pattathil, Raghavan (2010) Technology development for kaolin processing. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, Mita and Tarafder, S (2010) Simulation of cyclic plastic deformation response in SA333 C–Mn steel by a kinematic hardening model. Computational Materials Science, 48 (3). pp. 662-671.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2010) Cyclic plastic deformation and cyclic hardening/softening behavior in 304LN stainless steel. Theoretical and Applied Fracture Mechanics, 54 (1). pp. 63-70.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2010) Ratcheting and low cycle fatigue behavior of SA333 steel and their life prediction. Journal of Nuclear Materials, 401 . pp. 17-24.

Paul, Surajit Kumar and Sivaprasad, S and Dhar, S and Tarafder, S (2010) True stress control asymmetric cyclic plastic behavior in SA333 C–Mn steel. International Journal of Pressure Vessels and Piping, 87 (8). pp. 440-446.

Ponomaryova, E I and Koizhanova, A K (2010) Redox processes in sulfide minerals biochemical solutions reactions. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Prabhakar, S and Bhaskar Raju, G and Subba Rao, S and Vijaya Kumar, T V (2010) Column flotation technology — NML experience. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Prakash, S and Shah, Liaquat Ali (2010) Impression on Collaboration between NML, India and CARIRI, Trinidad and Tobago. WAITRO News, DIT 4th Strategic Forum WAITRO . pp. 9-10.

Pramanick, A K (2010) The Effect of Cobalt Addition on Microstructural Variation in Melt Spun ZR-Al-Cu-Ni Alloys. In: National Conference with international participation of Materials science and new materials-2008, December 4-5, 2008, Sofia, Bulgaria.

Prasad, A B Krishna and Ravindran, Indira and Ravi, B P and Haran, N P and Majumdar, A (2010) Optimization flotation studies on a phosphorite sample from Jhamarkotra, Udaipur district, Rajasthan, India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Prasad, Bably and Sangeeta, Kumari and Tewary, B K (2010) Utilisation of geosynthetic liner for prevention of ground water contamination due to coal ash disposal in abandoned open cast mines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Prasad, K and Prasad, Lakshman and Rao, P V T (2010) Preparing superior grade raw materials to enhance the viability of Indian sponge iron sector. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Prasad, Ranjit and Chaudhary, Akhilesh (2010) Phase transformation of friable chromite ore during heating in the inert atmosphere. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Prasad, Ranjit and Shallika, Swati (2010) Molecular approach for phytoremediation and phytomining of metal-contaminated sites. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Prasad, Ranjit and Verma, Meenu and Kumari, Kriti (2010) The phytoavaibility and phytomining of uranium. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Prasad, Sanjay (2010) Environmental Impact on Electronic Waste. In: Electronic Waste, 2010, NML, Jamshedpur.

Prasad, Sanjay (2010) An Examination of the Environmental Impact of Electronic Waste. In: National Seminar on Environmental Management in Metallurgical Industrial, 2010, BHU, Varanasi.

Prasad, Sanjay (2010) Kinetics of chromium extraction as sodium chromate from stainless steel dust. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Premkumar, P and Kannan, K and Venkatakrishnan, P G (2010) Menthol as volatile corrosion inhibitor for mild steel in HCl environment. Journal of Metallurgy and Materials Science, 52 (4). pp. 371-377.

Raghu Kumar, C and Tripathy, Sunil Kumar and Mohanan, Srijith and Venugopalan, T and Suresh, N (2010) Evaluation of floatex density separator performance using silica sand. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rajak, K K and Yadav, B K and Mandal, R B and Saxena, V K and Mandre, N R (2010) Bio-desulphurization of makum (Assam) coal. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Raji, K and Cecil Raj, S Alfred (2010) Sintered properties of aluminium alloy for better nano tool products. Journal of Metallurgy and Materials Science, 52 (2). pp. 169-172.

Raji, K and Raj, S Alfred Cecil (2010) Plasticity of tensile specimen of 7% copper in aluminium composite. Journal of Metallurgy and Materials Science, 52 (4). pp. 379-383.

Rajini Kanth, B and Ramarao, N V and Panda, A K and Gopalan, R and Mitra, A and Mukhopadhyay, P K (2010) Effect of annealing on the martensitic transformation of a CoNiAl ferromagnetic shape memory alloy. Journal of Alloys and Compounds, 491 (1-2). pp. 22-25.

Rajnikanth, V and Husain, M M and Ray, Ajoy K (2010) Difffusion bonding of non weldable high alloy steel. In: National Welding Meet , August 2010, Puducherry.

Ram, Mohan and Lal, S M (2010) Systematic characterization of bentonitic clay and its industrial significance. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rama Murthy, Y and Rao, Chenna B and Kapure, Gajanan and Tathavadkar, V (2010) New prospective for the utilisation of Indian lateritic chromite overburden. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Ramaswamy, S and Raghavan, P (2010) Investigations on a kaolin sample from kerala for possible value addition. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Randhawa, N S and Das, N N and Jana, R K (2010) Sorption of cadmium ions from aqueous solution by manganese nodules leached residue. In: National Metallurgist Day-Annual Technical Meeting (NMD-ATM) 2010, 13-15 November 2010, IISc Bangalore.

Randhawa, N S and Mishra, D and Jana, R K (2010) Smelting of leached sea nodule residue blended with manganese ore for recovery of manganese. In: 14th Int. Conf. on non-ferrous Min. & Met. 2010, 9-10 July, 2010, Varanasi.

Randhawa, N S and Mishra, D and Smita, K and Konar, J and Jana, R K (2010) Silicomanganese production from manganese nodules leach residue by blending with manganese ore. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Ranganathan, S and Ramachandrarao, P (2010) Thermodynamic modelling of the spontaneous vitrification process using transformation diagrams. Calphad, 34 . pp. 387-392.

Rao, B Ashwath and Kumar, Abhishek and Sinha, S N (2010) A study of froth flotation of coal using artificial neural networks. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rao, B Venkoba and Gopalakrishna, S J (2010) Simulation studies on robustness of multi-stage gravity circuit performance by random perturbations. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rao, D S and Vijaya Kumar, T V and Angadi, Shivakumar and Prabhakar, S and Bhaskar Raju, G (2010) Effects of modulus and dosage of sodium silicate on limestone flotation. Maejo International Journal of Science and Technology, 4 (3). pp. 397-404.

Rao, K Anand and Sreenivas, T and Venkitakrishnan, R R and Serajuddin, Md. and Karthikayini, P and Padmanabhan, N P H (2010) A kinetic model for alkaline leaching of uranium from dolomitic limestone ore. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rao, K Eswara and Ramesh, M and Suresh, K and Krishna, V Rama and Rao, D V Subba and Chaudhuri, S and Chattopadhyay, U S and Sharma, K K and Gouri Charan, T and Haldar, D D (2010) Laboratory flotation studies of imported coking coal fines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rao, K Hanumantha (2010) Revisiting sulphide mineral flotation: a few priorities and directions. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rao, M S and Ram, Mohan and Gundewar, C S (2010) Process development for recovery of chromite values from COB plant tailing samples collected from various operating plants in Sukinda. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rath, R K and Kar, S (2010) A numerical model for cyclic solid-liquid phase change. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rath, R K and Mohanty, S and Mohanta, M K and Singh, Ratnakar and Bhattacharyya, K K (2010) Efficacy of enhanced gravity separator in processing indian iron ore slime. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rath, R K and Mohanty, Sunati and Mohanta, M K and Singh, Ratnakar and Bhattacharyya, K K (2010) Enhanced gravity separator in processing Indian iron ore slime. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rath, R K and Mohanty, Sunati and Singh, Ratnakar and Nayak, B and Bhattacharyya, K K (2010) Beneficiation response of a low grade iron ore from eastern India for the production of sinter and pellet feed. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Ravi Kumar, B (2010) Influence of crystallographic textures on tensile properties of 316L austenitic stainless steel. Journal of Materials Science, 45 (10). pp. 2598-2605.

Ravi Kumar, B and Das, Swapan K and Mahato, B and Ghosh, R N (2010) Role of strain-induced martensite on microstructural evolution during annealing of metastable austenitic stainless steel. Journal of Materials Science, 45 (4). pp. 911-918.

Ravi Kumar, B and Das, Swapan K and Sharma, Sailaja and Sahu, J K (2010) Effect of thermal cycles on heavily cold deformed AISI 304L austenitic stainless steel. Materials Science and Engineering: A, 527 (4-5). pp. 875-882.

Ray, Ashok K and Bose, S C and De, P K and Das, D K (2010) Lifetime evaluation of a thick thermal barrier coated superalloy used in turbine blade. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 527 (21-22). pp. 5474-5483.

Ray, Ashok K and Bose, S C and De, P K and Mandal, D and Alam, H Z and Sharma, VSRA and Das, D K (2010) Evaluation of the Lifetime and Effect of Furnace Thermal Cycling on Stress Rupture Behaviour of a Thermal Barrier Coated Superalloy Used in a Turbine Blade. Canadian Metallurgical Quarterly, 49 (2). pp. 191-214.

Ray, Ashok K and Goswami, B and Tiwari, Y N and Das, H K and Das, D K and Kumar, Sashi Bhusan (2010) Fatigue and creep damage resistance of a thermal barrier coated superalloy for combustor liners in aero turbines. Transactions of The Indian Institute of Metals, 63 (2-3). pp. 485-491.

Ray, Ashok K and Roy, Nilima and Dash, Byomkesh and Ranganath, V R and Tiwari, Y N and Goswami, B and Dwarakadasa, E S (2010) Failure: Chapter 8. In: Introduction to the science and engineering of materials; MSE 209. Uinversity of Virginia, USA.

Ray, K K and Dutta, K and Sivaprasad, S and Tarafder, S (2010) Fatigue damage of AISI 304 LN stainless steel: Role of mean stress. Procedia Engineering, 2 (1). pp. 1805-1813.

Ray, Mallar and Basu, T S and Jana, Arpita and Bandopadhyay, N R and Hossain, S M and Pramanick, A K and Kile, Robert F (2010) Luminescent core-shell nanostructures of silicon and silicon oxide: Nanodots and nanorods. Journal of Applied Physics, 107 (6). 064311.

Reddy, Purushottam R and Raghavendra, N R and Sathyagangadharudu, A (2010) The study of banded iron formations of coppermountain belt near Torangal, Bellary District, Karnataka State (India). Journal of Metallurgy and Materials Science, 52 (2). pp. 161-168.

Reja, Yogesh and Garg, Pallav and Gupta, V K (2010) A model for simulation and control of open-circuit rod milling operation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rezai, B and Rahimi, M and Aslani, M R and Eslamian, Atiye and Dehghani, F (2010) Relationship between surface roughness of minerals and their flotation kinetics. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Rosenkranz, Jan (2010) Pressure agglomeration in solids processing— fundamentals and recent developments. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Routray, Sunita and Rao, R Bhima and Padhi, L N and Mishra, B and Panda, B K (2010) Recovery of placer zircons from konark— ramchandi beach and dunes and its value addition for refractory industries. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Roy, Animesh and Srivastava, R R and Smita, K and Mishra, D and Agrawal, A and Hait, Jhumki and Sahu, K K (2010) Acid pressure dissolution of matte produced from the alloy obtained from direct smelting of sea nodules. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Roy, Bhaskar (2010) Utilisation of india’s iron ore resources— present situation and future possibilities. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Roy, H and Bar, H N and Sivaprasad, S and Tarafder, S and Ray, K K (2010) Acoustic emission during monotonic and cyclic fracture toughness tests of 304LN weldments. International Journal of Pressure Vessels and Piping, 87 (10). pp. 543-549.

Roy, Nilima and Bose, S C and Ghosh, R N (2010) Stochastic aspects of evolution of creep damage in austenitic stainless steel. Materials Science and Engineering: A, 527 (18-19). pp. 4810-4817.

Roy, Nilima and Ghosh, R N and Bose, S C (2010) A stochastic model for evolution of creep damage in engineering materials. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 665-669.

Roy, Rajat K and Ghosh, M and Panda, A K and Ghosh, R N and Mitra, A (2010) Development of rapidly solidified 6.5 wt% silicon steel for magnetic applications. Transactions of the Indian Institute of Metals, 63 (4). pp. 745-750.

Runyoro, Joseph (2010) Effect of restrained hot spots and integrity of steel welded joints. Journal of Metallurgy and Materials Science, 52 (2). pp. 129-140.

Runyoro, Joseph (2010) The effect of tightening torque on anchor bolts embedded in concrete. Journal of Metallurgy and Materials Science, 52 (1). pp. 67-85.

Sah, Rakesh and Dey, S K and Vidyadhar, A and Das, Avimanyu (2010) Investigation on the applicability of advanced gravity separation for cleaning semi coking coal fines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Saha, Jayant K and Mitra, P K and Paul, S and Singh, D D N (2010) Performance of different organic coatings on steel substrate by accelerated and in atmospheric exposure tests. Indian Journal of Chemical Technology, 17 (2). pp. 102-110.

Sahu, A K and Goswami, N G (2010) Digital Repository of National Metallurgical Laboratory (CSIR),India. SPARC Open Access Newsletter, 151 (ISSN 1546-7821).

Sahu, A K and Goswami, N G (2010) Eprints@NML: Digital Repository of National Metallurgical Laboratory (CSIR),India. Open Access and Institutional Repositories with EPrints . pp. 1-4.

Sahu, B K (2010) Optimal liberation of ore minerals for ore beneficiation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sahu, K K and Agarwal, Sanjay and Ojasvi, and Mishra, D and Agrawal, A and Konar, J and Minj, R K and Godiwalla, K M (2010) Removal of manganese and iron from the alloy obtained from direct smelting of sea nodules. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sahu, Puspendu and Curtze, Sven and Das, Arpan and Mahato, B and Kuokkala, Veli Tapani and Ghosh Chowdhury, S (2010) Stability of austenite and quasi-adiabatic heating during high-strain-rate deformation of twinning-induced plasticity steels. Scripta Materialia, 62 (1). pp. 5-8.

Sahu, Rina and Chatterjee, S and Sahoo, K L (2010) Mechanical Properties and Nanocrystallization Behavior of Al-Ni-La Alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41 (4). pp. 861-869.

Sahu, Rina and Kailath, A J and Chatterjee, S and Sahoo, K L (2010) Effect of La content on the room temperature ageing behavior of Al90−xNi6La4+x (x = 0–3) metallic glasses. Materials Science and Engineering: A, 527 (6). pp. 1339-1342.

Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay and Mankhand, T R (2010) A comparative performance of two resins based on polysterene for removal of chromium(III) from tannery solution. In: Environmental Management in Metallurgical Industries, March 15-16, 2010, Banars Hindu University, Varanasi.

Saikia, Niharika and Khare, Puja and Dutta, M N and Baruah, B P (2010) Petrographic studies of Nagaland coals. Proceedings of the XI International Seminar on Mineral Processing, I . pp. 69-74.

Samal, S and Mukherjee, P S and Ray, Ajoy K (2010) Comparative Study on Energy Consumption and Yield by Various Thermal Plasma Routes for Production of Titania slag. Plasma Chemistry and Plasma Processing, 30 (3). pp. 413-428.

Sankara Narayanan, T S N (2010) Corrosion Science and Engineering. [Presentation Slide] (Unpublished)

Sankara Narayanan, T S N and Satendra, Kumar (2010) Evaluation of the fretting corrosion behaviour of surface modified CP-Ti for biomedical applications (OLP-0126). Exploratory (OLP). NML, Jamshedpur. (Submitted)

Sarkar, B and Das, Avimanyu (2010) A comparative study of slip velocity models for the prediction of performance of floatex density separator. International Journal of Mineral Processing, 94 (1-2). pp. 20-27.

Sarkar, Partha and Mohanta, Ojaswini and Pal, S K and Panda, A K and Mitra, A (2010) Magneto-Impedance behavior of Co-Fe-Nb-Si-B-based ribbons. Journal of Magnetism and Magnetic Materials, 322 (8). pp. 1026-1031.

Sarmah, Mridusmita and Khare, Puja and Baruah, B P (2010) Pyrolysis of high sulphur coals: possible sulphate aerosol formation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sasikumar, R and Arunachalam, R M (2010) Production of nanomaterials through machining. Journal of Metallurgy and Materials Science, 52 (2). pp. 141-147.

Satendra, Kumar (2010) Corrosion and fretting corrosion behaviour of surface modified titanium and ti6al4v in simulated body fluid. Masters thesis, Indian Institute of Technology Madras, Chennai.

Satendra, Kumar and Sankara Narayanan, T S N and Saravana Kumar, S (2010) Influence of fluoride ion on the electrochemical behaviour of β-Ti alloy for dental implant application. Corrosion Science, 52 (5). pp. 1721-1727.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh (2010) Corrigendum to “Thermal oxidation of CP-Ti: Evaluation of characteristics and corrosion resistance as a function of treatment time” [Mater. Sci. Eng., 29 (2009) 1942–1949]. Materials Science and Engineering: C, 30 (2). p. 330.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Fretting corrosion behaviour of thermally oxidized CP-Ti in Ringer’s solution. Corrosion Science, 52 (3). pp. 711-721.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Surface modification of CP-TI to improve the fretting corrosion resistance: Thermal oxidation vs. anodizing. Materials Science and Engineering: C, 30 (6). pp. 921-927.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Thermal oxidation of CP Ti — An electrochemical and structural characterization. Materials Characterization, 6 1 . pp. 589-597.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Thermal oxidation of Ti6Al4V alloy: Microstructural and electrochemical characterization. Materials Chemistry and Physics, 119 (1-2). pp. 337-346.

Satendra, Kumar and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Evaluation of fretting corrosion behaviour of CP-Ti for orthopaedic implant applications. Tribology International, 43 (7). pp. 1245-1252.

Satendra, Kumar and Sivakumar, B and Sankara Narayanan, T S N and Sundara Raman, Ganesh and Seshadri, S K (2010) Fretting-corrosion mapping of CP-Ti in Ringer's solution. Wear, 268 (11-12). pp. 1537-1541.

Sau, D C and Mohanty, Swati and Biswal, K C (2010) Experimental studies and empirical models for the prediction of bed expansion in gas–solid tapered fluidized beds. Chemical Engineering and Processing: Process Intensification, 49 (4). pp. 418-424.

Saxena, V K and Varma, Atul K and Kumar, Gunjan (2010) Effect of stamping and binder on coke quality for LVMC Coal. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sen, P K (2010) Exergy analysis of mineral processing flow sheets: implications in process design. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sen, S and Saha, P and Prasad, K (2010) A novel technique for the synthesis of CaCu3Ti4O12 ceramics. Materials Science-Poland, 28 (1). pp. 265-271.

Senapati, Bimalananda and Kumar, C Satish and Banerjee, Tonmoy (2010) Water management at Vedanta aluminium Ltd., Lanjigarh refinery. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sengupta, A K and Banerjee, T H and Ram, Mohan (2010) Beneficiation of iron ore fines from mine rejects. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Serajuddin, Md. and Rajan, K C and Anand Rao, K and Sreenivas, T and Padmanabhan, N P H (2010) Filtration studies on a limestone hosted uranium ore leached slurry. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Seshu Kumar, A and Ravi Kumar, B and Datta, G L and Ranganath, V R (2010) Effect of microstructure and grain size on the fracture toughness of a micro-alloyed steel. Materials Science and Engineering: A, 527 (4-5). pp. 954-960.

Shahrokhi, Sayed Vahid and Farhadinejad, Taher and Sahamieh, Reza Zarei (2010) Study of mineralization in gholgholeh area based on SEM and fluid inclusion (southwest of saghez city—Iran). Proceedings of the XI International Seminar on Mineral Processing Technology, I . pp. 57-63.

Shaik, Shamshad and Bagchi, Sudeep and Ghosh, S and Mukherji, A K (2010) Beneficiation of iron ore fines to improve blast furnace productivity. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Shankargouda, M and Eligar, Suresh and Swamy, Gurubasayya and Sri Raghava, T J (2010) Adaptation of efficient thickeing technology in the circuit for economical recovery of gold at Hutti gold mine. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sharma, Abhishek and Rai, Nandani (2010) Effect of burnt lime addition on sintering of iron ore fines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sharma, K K and Sinha, K M K and Gouri Charan, T and Haldar, D D (2010) Generation of fines by crushing the raw coal to different sizes and effects of lab flotation tests on its results using these coal fines. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sharma, Mamta and Singh, A K and Choudhury, Nandita and Bhattacharyya, K K (2010) Petrography of beneficiated heat altered coals from damodar valley coalfields, India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sharma, Meenakshi (2010) Hydrophillic coating on Glass Substrate. Masters thesis, CSIR-National Metallurgical Laboratory (NML).

Shukla, S and Bhunia, Kamalendu and Kundu, G and Mukherjee, D (2010) Study of liquid phase mixing characteristics in flotation column. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Singh, Ashok K and Sharma, Mamta and Singh, Mahendra P and Choudhury, Nandita (2010) SEM study of some Indian natural cokes (jhama). In: International Pittsburgh Coal Conference, October, 2010, Istanbul, Turkey.

Singh, Ashok K and Shukla, N K and Sharma, Mamta and Choudhury, Nandita (2010) Beneficiation prospects of baked coking coals from seam XV, Jharia Coalfield, Damodar Valley, India. In: International Pittsburgh Coal Conference, October 11-14, 2010, Istanbul, Turkey.

Singh, D D N and Bhattacharya, D (2010) Performance and mechanism of action of self-priming organic coating on oxide covered steel surface. Progress in Organic Coatings, 68 (1-2). pp. 62-69.

Singh, D D N and Bhattacharya, D (2010) Performance and mechanism of action of self-priming organic coating on oxide covered steel surface. Progress in Organic Coatings, 67 (2). pp. 129-136.

Singh, D D N and Pandeya, A (2010) Role of Self-Assembled Monolayer of 1,2,3-Benzotriazole in Protecting Copper Artifacts Covered with Sulfide Film. Corrosion, 66 (11). 115002-115002-11.

Singh, K K and Mankhand, T R and Sinha, S N (2010) High temperature treatment of waste printed circuit boards to recover valuable metals. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Singh, K M P and Udayabhanu, G and Gouri Charan, T and Haldar, D D (2010) Flocculation studies on non-coking coal fines using suitable reagents. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Singh, Krishna (2010) Optimization of parameters for Biosorption of Cr(III) by Aspergillus niger. Masters thesis, National Metallurgical Laboratory (NML).

Singh, Kulwant and Bidaye, A C and Suri, A K (2010) Model for prediction of coating composition deposited by sputtering using composite target in a reactive gas environment. Journal of Metallurgy and Materials Science, 52 (4). pp. 317-329.

Singh, R N and Awasthi, R and Tiwari, S K (2010) Electro-Catalytic Activities of Binary Nano-Composites of Pt and NanoCarbon/Multiwall Carbon Nanotube for Methanol Electro-Oxidation. The Open Catalysis Journal, 3 (1876-214X/10). pp. 50-57.

Singh, Rajesh Kumar (2010) The corrosion protection of stainless steel in phosphate fertilizer industry. Journal of Metallurgy and Materials Science, 52 (2). pp. 173-180.

Singh, Ratnakar and Sinha, N (2010) Floatation studies on a low grade graphite sample from Palamu. Journal of Chemtracks, 12 (1). pp. 71-74.

Singh, S K and Singh, A K and Sarangi, A K (2010) Flocculation and filtration studies on uranium ore slurry using some commercial flocculating agents. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Singh, Sanjay and Bhardwaj, S and Panda, A K and Ahire, V and Mitra, A and Awasthi, A M and Barman, S R (2010) Structural, Thermal and Magnetic Properties of Ga Excess Ni-Mn-Ga. Materials Science Forum, 635 . pp. 43-47.

Sinha, K M K and Sharma, T and Haldar, D D (2010) Effect of ash of raw and beneficiated coal as well as operating variables on gasification process. Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), 1 (Section 6). pp. 498-501.

Sinha, Manish K and Sahu, S K and Meshram, Pratima and Pandey, B D and Kumar, Vinay (2010) Extractive separation and recovery of hydrochloric acid and iron values from spent pickle liquor. In: XI International Seminar on Mineral Processing Technology (MPT-2010), 15 - 17 December, 2010, NML, Jamshedpur.

Sinha, Satish and Guha, Avijit and Sinha, Arvind (2010) Macroporous hybrid frameworks for bone graft substitute. Materials Science and Engineering: C, 30 . pp. 873-877.

Sivaprasad, S and Narasaiah, N and Das, Swapan K and Das, Goutam and Tarafder, S and Gupta, K K and Ghosh, R N (2010) Investigation on the failure of air compressor. Engineering Failure Analysis, 17 (1). pp. 150-157.

Sivaprasad, S and Paul, Surajit Kumar and Das, Arpan and Narasaiah, N and Tarafder, S (2010) Cyclic plastic behaviour of primary heat transport piping materials: Influence of loading schemes on hysteresis loop. Materials Science and Engineering: A, 527 (26). pp. 6858-6869.

Sivaprasad, S and Paul, Surajit Kumar and Gupta, Suneel K and Bhasin, V and Narasaiah, N and Tarafder, S (2010) Influence of uniaxial ratchetting on low cycle fatigue behaviour of SA 333 Gr.6 C–Mn steel. International Journal of Pressure Vessels and Piping, 87 (8). pp. 464-469.

Sivaprasad, S and Paul, Surajit Kumar and Gupta, Suneel K and Bhasin, Vivek and Narasaiah, N and Tarafder, S (2010) Influence of uniaxial ratchetting on low cycle fatigue behviour of SA 333 Gr. 6 C–Mn steel. International Journal of Pressure Vessels and Piping, 87(8) . pp. 464-469.

Sivaprasad, S and Paul, Surajit Kumar and Narasaiah, N and Tarafder, S (2010) Experimental investigation on cyclic deformation behaviour of primary heat transport piping materials: Masing analysis of hysteresis loops. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 559-563.

Smita, K and Srivastava, R R and Mishra, D and Sahu, K K and Singh, T B and Agrawal, A and Jana, R K (2010) Recovery of valuable metals from sea nodules through reduction-roasting ammonia leaching process. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sontakkey, V A and Rao, M S and Ram, Mohan (2010) Development of simple process flowsheet for a silica sand sample to produce high grade silica sand concentrate from Ratnagiri district, Maharashtra. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sreenivas, T and Rao, K Anand and Rao, M Manmadha and Rajan, K C and Serajuddin, Md. and Karthikayini, P and Padmanabhan, N P H (2010) Autoclave leaching of refractory uranium minerals. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sriamoju, S K and Suresh, A and Lingam, R K and Ray, Tathagata and Dash, P S and Banerjee, P K (2010) Determination of diffusion coefficient for coal leaching process. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Srikanth, S (2010) CSIR-NML Diamond Jubilee Anniversary Celebrations. [Presentation Slide] (Unpublished)

Srinivasa Rao, D and Rajalaxmi, M and Vasumathi, N and Bhima Rao, R (2010) Beneficiation studies on beach placer sample for steel making industries. Journal of Mining and Metallurgy Section A: Mining, 46 A . pp. 11-21.

Srinivasan, A and Swaminathan, J and Gunjan, M K and Pillai, U T S and Pal, B C (2010) Effect of intermetallic phases on the creep behavior of AZ91 magnesium alloy. Materials Science and Engineering: A, 527 (6). pp. 1395-1403.

Srivastava, B N (2010) Analysis of iron ore by axios-advanced x-ray fluorescence spectrometer using potassium pyro-sulphate fusion technique. Proceedings of the XI International Seminar on Mineral Processing Technology, I . pp. 47-50.

Srivastava, V C and Surreddi, K B and Scudino, S and Schowalter, M and Uhlenwinkel, V and Schulz, A and Eckert, J and Rosenauer, A and Zoch, H -W (2010) Microstructure and mechanical properties of partially amorphous Al85Y8Ni5Co2 plate produced by spray forming. Materials Science and Engineering A, 527 (10-11). pp. 2747-2758.

Statsjuk, V N and Kenzhaliev, B K and Fogel, L A (2010) Elecrocemical formation of semiconductor nanocrystalline thin films from complex electrolyts. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Stoichev, N and Pramanick, A K and Yaneva, S and Giurov, S and Lazarova, M and Setman, D and Stefanov, G (2010) Influence of Zr on structure development in rapidly solidified AI-Si alloys. In: Nanoscience & Nanotechnology-10. Bulgaria, Sofia, Bulgaria, pp. 138-140. ISBN 1313-8995

Subramanian, S and Chockalingam, Evvie and Braun, J J (2010) Studies on acid production potential of mine tailings and bioremediation of acid mine water from an abandoned indian copper mine. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Sukharnikov, Yu I and Yefremova, S V and Zharmenov, A A (2010) Some advanced materials from the rice processing waste and their application in various branches of industry and agriculture. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Suleimenov, E N and Mahato, M M (2010) Changes in melted slag structure with their temperature change. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Suleimenov, E N and Mahato, M M (2010) Melted slag and electric current. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Suresh, A and Ray, T and Dash, Pratik S. and Banerjee, P K (2010) Coke property prediction from coal blend properties using ANFIS model. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Surreddi, K B and Srivastava, V C and Scudino, S and Sakaliyska, M and Uhlenwinkel, V and Kim, Joon-Soo and Eckert, J (2010) Production of high-strength Al85Y8Ni5Co2 bulk alloy by spark plasma sintering. Journal of Physics: Conference Series, 240 . 012155.

Swain, Ranjita and Rao, R Bhima (2010) Leaching kinetics for iron from partially laterised khondalite rocks by hydrochloric acid solution. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Tamrakar, P K and Prajapati, D and Sarangi, A K (2010) Study of leaching characteristics on low grade uranium ore of bagjata mine. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Tarafder, Mita and Chattoraj, I and Nasipuri, M and Tarafder, S and Das, S K (2010) Fractal Analysis of Microstructural Images For Evaluation of HSLA Steel. TMS 2010 139th Annual Meeting & Exhibition - Supplemental Proceedings, 2 . pp. 567-276.

Tarafder, Mita and Das, S K and Chattoraj, I and Nasipuri, M and Tarafder, S (2010) Fractal-based quantification of crack paths for determination of effective microstructural length scales and fracture toughness. Scripta Materialia, 62 (2). pp. 109-112.

Tarafder, S (2010) Technology for Engineering Critical Assessment: Project Completion Report. Grant in Aid (GAP). CSIR-NML, Jamshedpur. (Submitted)

Thella, John Samuel and Mukherjee, Asim Kumar and Rajshekhar, Y (2010) Recovering iron values from iron ore slimes using cationic and anionic collectors. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Thriveni, Thenepalli and Ryu, Miyoung and Kim, Hwan and Han, GI-Chun and Ahn, Ji-Whan (2010) Aragonite precipitated calcium carbonate : A new kind of functional filler. Journal of Metallurgy and Materials Science, 52 (4). pp. 279-303.

Tiwari, Y N (2010) Assessment of SRT & Mechanical properties on boiler tubes. Sponsored (SSP). National Metallurgical Laboratory, Jamshedpur. (Submitted)

Tiwary, S N and Tripathi, P S M (2010) Effect of variation of moisture content of Hariajam coal on its electrical resistivity. Journal of Metallurgy and Materials Science, 52 (3). pp. 239-245.

Tran, N and Mir, Aparna and Mallik, D and Sinha, Arvind and Nayar, S and Webster, Thomas J (2010) Bactericidal effect of iron oxide nanoparticles on Staphylococcus aureus. International Journal of Nanomedicine, 5 . pp. 277-283.

Tripathi, Avinash and Agrawal, Ashish and Gupta, V K (2010) Development of a mathematical model for simulation of coal crushing in a Hammer mill. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Tripathy, Sunil Kumar and Ramamurthy, Y and Sahu, G P and Panda, Lopamudra and Singh, Virendra and Tathavadkar, V (2010) Influence of shaking table process parameters on concentration of chromite plant tailings. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Tripathy, Sunil Kumar and Ramamurthy, Y and Sahu, G P and Tathavadkar, V (2010) Ultra fine chromite concentration using spiral concentrator. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Umadevi, T and Rao, S Rakesh and Roy, Pankaj and Mahapatra, P C (2010) Influence of LD slag on iron ore sinter properties and productivity. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Upadhyay, Rajendra Kumar and Venkatesh, Akella Satya and Roy, Subrata (2010) Mineralogical Characteristics of Iron Ores in Joda and Khondbond Areas in Eastern India with Implications on Beneficiation. Resource Geology, 60 (2). pp. 203-211.

Vaish, A K and Nayak, B and Goswami, M C and Singh, S D and Singh, D P and Gupta, R C (2010) Magnetite ore of nagaland—its mineralogy and reduction kinetics. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Vaish, A K and Singh, S D and Minj, R K and Chishi, H K and Gupta, R C (2010) Prospects of Nickel—Chromium—Cobalt Bearing Magnetite Ore Deposit of Nagaland. IIM Metal News, 13 (4). pp. 17-22.

Vasumathi, N and Vijaya Kumar, T V and Rao, D S and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2010) Quality improvement of garnet and quartz by environment friendly natural surfactant. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Venkateswarlu, K and Rajnikanth, V and Ray, Ajoy K and Xu, Cheng and Langdon, T G (2010) The characteristics of aluminum–scandium alloys processed by ECAP. Materials Science and Engineering: A, 527 (6). pp. 1448-1452.

Venkateswarlu, K and Rajnikanth, V and Ray, Ajoy K and Xu, Cheng and Langdon, T G (2010) Effect of A Scandium Addition On An Al-2% Si Alloy Processed by ECAP. Reviews on Advanced Materials Science, 25 (2). pp. 99-106.

Venkateswarlu, K and Rajnikanth, V and Sen, Mani Kuntal and Alhajeri, S N and Langdon, T G (2010) Application of High-Pressure Torsion to Al-Si Alloys with and without Scandium Additions. Materials Science Forum, 667-669 . pp. 743-748.

Venkateswarlu, K and Saurabh, Suman and Rajnikanth, V and Sahu, Ranjan K and Ray, Ajoy K (2010) Synthesis of TiN Reinforced Aluminium Metal Matrix Composites Through Microwave Sintering. Journal of Materials Engineering and Performance, 19 (2). pp. 231-236.

Venugopal, R (2010) Solid waste processing for industrial utilization— a few case studies. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Vidyadhar, A and Singh, A K and Srivastava, A and Nayak, B and Rao, K V and Das, Avimanyu (2010) Beneficiation of banded hematite quartzite from meghatuburu mine, eastern India. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Vijaya Kumar, T V and Rao, D S and Bhaskar Raju, G and Prabhakar, S and Subba Rao, S (2010) Cleaner production of garnet sand for environmental abatement. The Pacific Journal of Science and Technology , 11 (2). pp. 585-591.

Vijaya Kumar, T V and Rao, D S and Subba Rao, S and Prabhakar, S and Bhaskar Raju, G (2010) Reverse flotation studies on an Indian low-grade iron ore slimes. International Journal of Engineering Science and Technology, 2 (4). pp. 637-648.

Vijaya Kumar, T V and Subba Rao, S and Bhaskar Raju, G and Shivakumar, S and Raman, Uma (2010) Development, testing and plant trails of single reagent system for coal flotation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Vinh, H H and Lee, Jae-chun and Jeong, Jinki and Huyunh, Trung Hai and Jha, Manis K (2010) Thiosulfate leaching of gold from waste mobile phones. Journal of Hazardous Materials, 178 (1-3). pp. 1115-1119.

Wackermann, Ken and Kumar Sahu, Jitendra and Christ, H J (2010) 475oC Embrittlement and Room Temperature Fatigue of Duplex Stainless Steel. In: Proceedings of 18th European Conference on Fracture of Materials and Structures"Fracture of Mateials and Structures from Micro to Macro Scale, 2010, DVM, Berlin.

Wackermann, Ken and Sahu, J K and Christ, H J (2010) 475°C Embrittlement and Room Temperature Fatigue of Duplex Stainless Steel. In: Proceedings of 18th European Conference on Fracture of Materials and Structures "Fracture of Materials and Structures from Micro to Macro Scale", D. Klingbeil, M. Vormwald, K.-G. Eulitz (Hg), 2010, DVM, Berlin.

Wetter, Martin and Bandopadyay, Ketan (2010) Crushing solutions for rom sizing. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Zakharova, N A and Dosymbaeva, Z D and Koiyzhanova, A K and Suleimenov, E N and Beisembaeva, G Zh. (2010) Study of gold and silver leaching processes from sulfide ores. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Zandrahimi, Morteza and Ebrahimifar, Hadi (2010) A study on the formation of intermetallic compound coatings on Inconel through pack cementation method. Journal of Metallurgy and Materials Science, 52 (4). pp. 331-339.

Zarei Sahamieh, Reza and Pazoki, Amir and Rezaei, Peiman and Saket, Ali (2010) Petrological and geochemical characteristics of the Granitoid complex of astaneh, western Iran, from the point of beneficiation. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

Ziaja, Dieter and Saraswat, Nikhil and Ognyanova, Albena (2010) Beneficiation of indian iron ore lumps and fines by using underbed air–pulsated BATAC jigs. In: Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010), Dec 2010, NML Jamshedpur, India.

This list was generated on Thu Mar 28 15:30:55 2024 IST.